Make Functorch interpreters serializable most of the time, so that we can save the guards on functorch states.
## Test Cases:
0. torch.compile() without functorch layers present. Guard should fail with any layer being pushed.
1. torch.compile() nested in vmap.
2. torch.compile() nested in grad.
3. torch.compile() nested in jvp + vmap
4. torch.compile() nested functionalize
5. torch.compile() nested in vmap + grad
Differential Revision: [D74008787](https://our.internmc.facebook.com/intern/diff/D74008787/)
Pull Request resolved: https://github.com/pytorch/pytorch/pull/152616
Approved by: https://github.com/zou3519
ghstack dependencies: #152615
Enables clang-tidy rule [`misc-use-internal-linkage`](https://clang.llvm.org/extra/clang-tidy/checks/misc/use-internal-linkage.html). This new check was introduced in Clang-Tidy 18 and is available due to recent update of Clang-Tidy 19.
The check marks functions and variables used only in the translation unit as static. Therefore undesired symbols are not leaked into other units, more link time optimisations are possible and the resulting binaries may be smaller.
The detected violations were mostly fixed by using static. In other cases, the symbols were indeed consumed by others files, then their declaring headers were included. Still some declarations were wrong and have been fixed.
Pull Request resolved: https://github.com/pytorch/pytorch/pull/148948
Approved by: https://github.com/Skylion007
The original change was about 9.5% slower than then before #122074 .
This improves it to be only about 1.4% slower.
Also touched up some unrelated nits that the linter complained about.
Fixes#126293
Ran torchbench 3 times on each change. Perf values before (stable), after (fix),
and with #122074 backed out (backout):
```
../inductor-tools/scripts/modelbench/inductor_single_run.sh single inference performance torchbench pyhpc_isoneutral_mixing amp first dynamic cpp
stable:
43.948x
45.754x
44.906x
fix:
47.505x
49.987x
47.493x
backout:
48.243x
48.199x
48.192x
../inductor-tools/scripts/modelbench/inductor_single_run.sh single inference performance torchbench pyhpc_equation_of_state amp first static default
stable:
15.224x
13.286x
15.354x
fix:
16.402x
16.370x
16.183x
backout:
16.554x
16.675x
16.787x
../inductor-tools/scripts/modelbench/inductor_single_run.sh single inference performance torchbench lennard_jones float32 first static default
stable:
1.712x
1.651x
1.640x
fix:
1.804x
1.798x
1.792x
backout:
1.864x
1.824x
1.836x
```
Pull Request resolved: https://github.com/pytorch/pytorch/pull/126996
Approved by: https://github.com/jansel
We save and restore the DynamicLayerStack during frame eval but since fx graph has no way to express a try/finally we just assume it will happen. If we throw an exception between the push and pop to the stack then we're left in a state that affects following operations poorly. Make sure that if it's in a bad state we restore it after frame eval.
Repro:
before:
```
$ rm test/dynamo_skips/TestSparseCPU.test_log1p_cpu_uint8
$ rm test/dynamo_expected_failures/FuncTorchHigherOrderOpTests.test_vmap_free_tensor
$ PYTORCH_TEST_WITH_DYNAMO=1 pytest test/jit/test_sparse.py test/dynamo/test_dynamic_shapes.py test/inductor/test_torchinductor_dynamic_shapes.py test/test_sparse.py -k 'test_log1p_cpu_uint8'
============= 1 passed, 8588 deselected in 9.75s =============
$ PYTORCH_TEST_WITH_DYNAMO=1 pytest test/jit/test_sparse.py test/dynamo/test_dynamic_shapes.py test/inductor/test_torchinductor_dynamic_shapes.py test/test_sparse.py -k
'test_vmap_free_tensor_dynamic_shapes or test_log1p_cpu_uint8'
================== short test summary info ===================
FAILED [0.0632s] test/test_sparse.py::TestSparseCPU::test_log1p_cpu_uint8 - AssertionError: "only Tensors of floating point dtype can require gradients"
does not match "You are attempting to call Tensor.requires_grad_() (or perhaps using torch.autograd.functional.* APIs) inside of a function ...
======= 1 failed, 1 skipped, 8587 deselected in 10.99s =======
```
(Note that adding test_vmap_free_tensor_dynamic_shapes causes test_vmap_free_tensor_dynamic_shapes to fail)
after:
```
$ rm test/dynamo_skips/TestSparseCPU.test_log1p_cpu_uint8
$ rm test/dynamo_expected_failures/FuncTorchHigherOrderOpTests.test_vmap_free_tensor
$ PYTORCH_TEST_WITH_DYNAMO=1 pytest test/jit/test_sparse.py test/dynamo/test_dynamic_shapes.py test/inductor/test_torchinductor_dynamic_shapes.py test/test_sparse.py -k 'test_log1p_cpu_uint8'
============= 1 passed, 8588 deselected in 9.89s =============
$ PYTORCH_TEST_WITH_DYNAMO=1 pytest test/jit/test_sparse.py test/dynamo/test_dynamic_shapes.py test/inductor/test_torchinductor_dynamic_shapes.py test/test_sparse.py -k
'test_vmap_free_tensor_dynamic_shapes or test_log1p_cpu_uint8'
======= 1 passed, 1 skipped, 8587 deselected in 11.34s =======
```
(test_vmap_free_tensor_dynamic_shapes passes either way)
Pull Request resolved: https://github.com/pytorch/pytorch/pull/122074
Approved by: https://github.com/oulgen
List of changes:
- Replace JVP_NESTING by torch._C._functorch.maybe_current_level()
- Remove all increment nesting functions from wrap_fx_proxy_cls
- fwAD.make_dual receives the dual_level as keyword argument
- Add jvp_increment_nesting, set_fwd_grad_enabled and dual_level context managers to dynamo
Pull Request resolved: https://github.com/pytorch/pytorch/pull/119926
Approved by: https://github.com/zou3519
List of changes:
- Replace JVP_NESTING by torch._C._functorch.maybe_current_level()
- Remove all increment nesting functions from wrap_fx_proxy_cls
- fwAD.make_dual receives the dual_level as keyword argument
- Add jvp_increment_nesting, set_fwd_grad_enabled and dual_level context managers to dynamo
Pull Request resolved: https://github.com/pytorch/pytorch/pull/119926
Approved by: https://github.com/zou3519
List of changes:
- Replace JVP_NESTING by torch._C._functorch.maybe_current_level()
- Remove all increment nesting functions from wrap_fx_proxy_cls
- fwAD.make_dual receives the dual_level as keyword argument
- Add jvp_increment_nesting, set_fwd_grad_enabled and dual_level context managers to dynamo
Pull Request resolved: https://github.com/pytorch/pytorch/pull/119926
Approved by: https://github.com/zou3519
PoC demonstrating vmap + NT based on the [design doc](https://docs.google.com/document/d/1dVVk6TOqz93PLTIneU2T3xaxCs9qZ0MaJyCvOAp_bC0). This PR:
* Allows `BatchedTensorImpl`s to contain NTs
* Introduces a `BatchedNestedTensor` dispatch key for NT-specific batching rules
* Provides a batching rule fallback that unbinds the NTs -> performs computation on constituent -> rebinds results into NT
Restrictions:
* Only supports one level of vmap
* Only supports vmapping over dim=0 for NTs
* For operations with mixed NT / dense inputs, support is also limited to dim=0 for the dense inputs
Pull Request resolved: https://github.com/pytorch/pytorch/pull/106786
Approved by: https://github.com/zou3519
In almost all cases this is only included for writing the output formatter, which
only uses `std::ostream` so including `<ostream>` is sufficient.
The istream header is ~1000 lines so the difference is non-trivial.
Pull Request resolved: https://github.com/pytorch/pytorch/pull/106914
Approved by: https://github.com/lezcano
In almost all cases this is only included for writing the output formatter, which
only uses `std::ostream` so including `<ostream>` is sufficient.
The istream header is ~1000 lines so the difference is non-trivial.
Pull Request resolved: https://github.com/pytorch/pytorch/pull/106914
Approved by: https://github.com/lezcano
Not only is this change usually shorter and more readable, it also can yield better performance. size() is not always a constant time operation (such as on LinkedLists), but empty() always is.
Pull Request resolved: https://github.com/pytorch/pytorch/pull/93236
Approved by: https://github.com/malfet
functorch used to have a switch that enables/disables autograd.Function.
That switch now enables/disables torch.autograd.function._SingleLevelFunction, so
I've renamed it accordingly.
We could just delete the switch because users should not be directly
working with torch.autograd.function._SingleLevelFunction. However,
it was useful for debugging when something went wrong when I was
implementing the autograd.Function <> functorch interaction, so I want
to keep it around as a debugging tool for a while since the code is
already there.
Test Plan:
- updated tests
Pull Request resolved: https://github.com/pytorch/pytorch/pull/92025
Approved by: https://github.com/soulitzer
This PR adds functionalization path for torch.cond. As it is the first pass, we only functionalize for very restrictive use cases. We explicitly restrict following:
- Output of each branch aliasing input
- In-place mutation on inputs given to each branch
Pull Request resolved: https://github.com/pytorch/pytorch/pull/89966
Approved by: https://github.com/zou3519
This PR:
- adds VmapInterpreter.randomness. This returns the randomness option
the user provided in vmap(..., randomness=...)
- adds randomness in the info object passed to the vmap staticmethod of
autograd.Function. This is so that the user can handle random operations
on their own terms (if randomness="error", and if the autograd.Function
has random operations, then it is the user's responsiblity to raise an
error).
Test Plan:
- updated unittest
Pull Request resolved: https://github.com/pytorch/pytorch/pull/90789
Approved by: https://github.com/samdow, https://github.com/soulitzer
This PR adds functorch.jvp support for autograd.Function. It does so by
adding a jvp rule for custom_function_call.
For a regular PyTorch operation (like at::sin), the VariableType kernel:
- re-dispatches to at::sin
- calls the jvp rule for at::sin
The jvp rule for custom_function_call does just that. It constructs a
new autograd.Function (because the above logic already exists). Inside
the forward, it re-dispatches to custom_function_call. In the jvp rule,
it just calls whatever the jvp rule is supposed to be.
Since this logic is really close to the custom_function_call_grad, I
just put them together.
Test Plan:
- added jvp rules to the autograd.Function in autograd_function_db
Pull Request resolved: https://github.com/pytorch/pytorch/pull/90077
Approved by: https://github.com/albanD, https://github.com/soulitzer
A "life handle" is a pointer-to-boolean that says whether or not a
TensorWrapper is alive. A TensorWrapper is alive if we are currently
inside of its corresponding transform. An Interpreter is alive if we are
currently inside of its corresponding transform. I.e., for vmap(f)(x),
the BatchedTensor(x, level=1) is alive inside of the execution of f; and
the corresponding VmapInterpreter is alive inside of f.
Previously, there was a global map of level to life handle. It is
possible to get into a state where we have multiple levels that refer to
different Interpreters (if the implementation of an operator calls into
functorch) and that messes up the global map.
This PR changes it so that
- every Interpreter holds a life handle that says if it is alive
- to construct a TensorWrapper, one must either (a) directly pass it a life
handle, or (b) one must create the TensorWrapper when the corresponding
Interpreter is on the stack (and we will automatically grab the life
handle by indexing into the DynamicLayerStack with the level)
(a) is more robust so I changed most of our C++ callsites to do that.
(b) feels a bit hacky to me, but it seems fine for now:
- It'll raise a nice error message if the interpreter isn't on the stack
- all of our Python callsites already follow this convention (we construct
TensorWrappers after pushing the Interpreter onto the stack).
The alternative to (b) is that we always do (a), which we can do in the
future if (b) runs us into any problems.
Test Plan:
- all functorch tests
Pull Request resolved: https://github.com/pytorch/pytorch/pull/90317
Approved by: https://github.com/samdow
Motivation
- These were previously defined in functorch. They are not
functorch-specific, so I'm moving them to torch.autograd.forward_ad and
the autograd python bindings.
- I need this to avoid some of my cyclic import problems.
Should these be public APIs? Probably. Though this needs discussion, so
punting it to the future.
Test Plan:
- moved the tests of these from test/functorch/test_eager_transforms.py
to test/test_autograd.py
Pull Request resolved: https://github.com/pytorch/pytorch/pull/90240
Approved by: https://github.com/soulitzer
This PR adds a `vmap` staticmethod to autograd.Function and a
corresponding vmap kernel for custom_function_call. These two items mean
that autograd.Function with a vmap staticmethod can be used with vmap.
```py
class NumpyMul(torch.autograd.Function)
staticmethod
def forward(x, y):
return torch.tensor(to_numpy(x) * to_numpy(y), device=x.device)
staticmethod
def setup_context(ctx, outputs, x, y):
ctx.save_for_backward(x, y)
staticmethod
def backward(ctx, grad_output):
x, y = ctx.saved_tensors
gx = None
if isinstance(x, torch.Tensor) and x.requires_grad:
gx = NumpyMul.apply(grad_output, y)
gy = None
if isinstance(y, torch.Tensor) and y.requires_grad:
gy = NumpyMul.apply(grad_output, x)
return gx, gy
staticmethod
def vmap(info, in_dims, x, y):
x_bdim, y_bdim = in_dims
x = x.movedim(x_bdim, -1) if x_bdim else x.unsqueeze(-1)
y = y.movedim(y_bdim, -1) if y_bdim else y.unsqueeze(-1)
result = NumpyMul.apply(x, y)
result = result.movedim(-1, 0)
return result, 0
```
API Spec
- the staticmethod takes two arguments (info, in_dims) as well as the
unexpanded inputs (x, y).
- If we think about it as `vmap(info, in_dims, *args)`, `in_dims` is a
pytree with the same tree structure as args. It has None if the arg is
not being vmapped over and an integer vmapped dimension index if it is.
- `info` is an object with metadata about the vmap. It currently has one
field, `info.batch_size`. In the future we can extend this by adding
things like the randomness information.
- If there is a single vmap going on, (x, y) are NOT BatchedTensors,
they've already been unpacked.
- We expect the user to return a `(outputs, out_dims)` tuple. `out_dims`
must "broadcast" to the same pytree structure as `outputs`.
Semantics
- vmap(NumpyMul.apply)(x) will apply the vmap staticmethod if there is
one and will never actually run NumpyMul.forward.
- In order for the autograd.Function to support nested vmap (e.g.,
`vmap(vmap(NumpyMul.apply))(x)`, then the vmap staticmethod must call
into operations that vmap understands (i.e. PyTorch operators or more
autograd.Function).
At a high level, this PR:
- adds a vmap rule for custom_function_call
Testing
- Added some tests for in_dims and info
- Added vmap staticmethod to most of the autograd.Function in
autograd_function_db and sent them through functorch's vmap-related
OpInfo tests
Future
- Better error messages if the user gets the return contract wrong. I
didn't include them in this PR because it might involve a refactor of
some of the existing code in functorch/_src/vmap.py that will add
~200LOC to the PR, but LMK if you'd prefer it here.
Pull Request resolved: https://github.com/pytorch/pytorch/pull/90037
Approved by: https://github.com/samdow, https://github.com/soulitzer
Happy to split this PR more if it helps.
This PR adds functorch.grad support for autograd.Function. There's a lot
going on; here is the high level picture and there are more details as
comments in the code.
Mechanism (PyOperator)
- Somehow, autograd.Function needs to dispatch with functorch. This is
necessary because every layer of functorch needs to see the
autograd.Function; grad layers need to preserve the backward pass.
- The mechanism for this is via PyOperator. If functorch transforms are
active, then we wrap the autograd.Function in a `custom_function_call`
PyOperator where we are able to define various rules for functorch
transforms.
- `custom_function_call` has a rule for the functorch grad transform.
autograd.Function changes
- I needed to make some changes to autograd.Function to make this work.
- First, this PR splits autograd.Function into a _SingleLevelFunction
(that works with a single level of functorch transform) and
autograd.Function (which works with multiple levels). This is necessary
because functorch's grad rule needs some way of specifying a backward
pass for that level only.
- This PR changes autograd.Function's apply to eitehr call
`custom_function_call` (if functorch is active) or super().apply (if
functorch isn't active).
Testing
- Most of this PR is just testing. It creates an autograd.Function
OpInfo database that then gets passed to the functorch grad-based tests
(grad, vjp, vjpvjp).
- Since functorch transform tests are autogenerated from OpInfo tests,
this is the easiest way to test various autograd.Function with
functorch.
Future
- jvp and vmap support coming next
- better error message (functorch only supports autograd.Function that
have the optional setup_context staticmethod)
- documentation to come when we remove the feature flag
Pull Request resolved: https://github.com/pytorch/pytorch/pull/89860
Approved by: https://github.com/soulitzer
This PR teaches PyDispatcher and PyOperator about functorch transforms.
It is important that PyDispatcher/PyOperator dispatch with functorch
transforms, because this is our plan for higher-order operators
(operators that accept functions as arguments). Examples of these
include:
- functorch transforms over the existing cond operator (control flow)
- autograd.Function support for functorch (which I am working towards),
- AOTDispatcher (should be a higher order operator)
Concretely, the problem with teaching PyDispatcher/PyOperator about
functorch is that the stack-based dispatching logic (DynamicLayerStack)
is hidden inside the fallbacks for two dispatch keys
(DynamicLayer{Front, Back}). PyDispatcher doesn't know about C++ boxed
fallbacks, our plan on record for that is that we need to reimplement
all of them in Python (but can call helper functions in C++ to make our
lives easier).
Instead of exposing all of what DynamicLayer{Front, Back} do to python,
this PR takes the approach of re-implementing part of the stack-based
dispatching in Python. The motivation is that this is more sane and
follows what the "ideal" implementation of functorch would have been:
- each transform should be a "mode"
- there should be no TLS dispatch key set hackery. functorch needs to do
this hackery today to re-use VariableType implementations.
This PR:
- exposes the DynamicLayerStack to Python
- The DynamicLayerStack is a stack of Interpreters.
These get exposed to Python as well.
- Interpreters can run operations (Interpreter.process) or lower them to
the next interpreter in the stack (Interpreter.lower)
- To use a PyOperator with functorch transforms, a developer needs to
register a rule for each transform (vmap, grad, jvp, ...).
- The PyOperator API is NOT user-facing. Things like autograd.Function
support for functorch will end up going through the autograd.Function
API.
Question for reviewers:
- Does this design make sense?
- I'm trying to split up the "functorch support for autograd.Function"
work into logical pieces. Would it be better if I didn't? (the full
thing is a bit long - 1000-2000 LOC).
Test Plan:
- new tests that construct PyOperator and compose them with functorch
transforms
Pull Request resolved: https://github.com/pytorch/pytorch/pull/88785
Approved by: https://github.com/samdow, https://github.com/soulitzer
By upstreaming functorch's tensor printing logic into PyTorch. There's
no way of creating a custom print function for a TensorImpl subclass (as
opposed to a torch_dispatch or torch_function tensor subclass, which can
just override repr()) right now, so we need to directly interpose inside
regular Tensor printing in PyTorch.
Monkey patching is bad; users do not expect `import blah` to change
something about another library.
Fixes https://github.com/pytorch/functorch/issues/900
Test Plan:
- existing tests
Pull Request resolved: https://github.com/pytorch/pytorch/pull/85430
Approved by: https://github.com/ezyang
This moves functorch's python bindings to torch/csrc/functorch/init.cpp.
Coming next is the torchdim move. I didn't do torchdim yet because
moving functorch's python bindings unblocks some other things that I
want to do first.
Test Plan:
- tests
Pull Request resolved: https://github.com/pytorch/pytorch/pull/85426
Approved by: https://github.com/ezyang
