This adds a new operator debugprims::load_storage which does the unusual thing of loading a tensor from disk (via ContentStoreReader). This will be used in a later PR to implement delta debugging in the minifier, even when the repro is too big to fit into memory. The way it works is that you specify a name of the tensor you want to load, as well as enough metadata to reconstruct the tensor, if the store isn't available. If there is an active content store, we read and return the tensor from that store; otherwise we use `rand_strided` to create it.
I needed some infra improvements to do this:
* `custom_op` now supports factory functions. Factory functions have to be registered specially via `impl_factory`
* I modified `clone_input` to also support dtype conversion, which I use to change the dtype of a loaded tensor if necessary.
* ContentStore needs to work with a device argument, so we torch.load directly to the correct device. This is for fake tensor support.
Signed-off-by: Edward Z. Yang <ezyang@meta.com>
Pull Request resolved: https://github.com/pytorch/pytorch/pull/100519
Approved by: https://github.com/zou3519, https://github.com/anijain2305
The changes:
* Add config knob `same_two_models_use_fp64` for toggling whether or not to use fp64
* Add a test showing that RMSE is superior to atol/rtol
* Add `--strict-accuracy` options, which allows for testing against integral/boolean accuracy. Regular accuracy by default now ONLY. There's a test which exercises this, it's a little delicate but I had trouble thinking of a good test otherwise.
Signed-off-by: Edward Z. Yang <ezyang@meta.com>
Pull Request resolved: https://github.com/pytorch/pytorch/pull/100447
Approved by: https://github.com/voznesenskym
This PR splits OutputGraph into two classes:
- SubgraphTracer (handles FX-tracing)
- OutputGraph (handles Dynamo-specific output graph logic, like
tracking graph inputs, compiling the graph, and executing it).
The motivation behind this is in the next PR up in the stack.
TL;DR is: in order to do higher-order operators, we need nested
SubgraphTracer, one for each level of nesting of the higher-order
operators.
I'm happy to flatten the stack into a single PR, but this separate made
it easier for me to test. Lmk if you want the stack flattened.
Test Plan:
- existing tests
Pull Request resolved: https://github.com/pytorch/pytorch/pull/99987
Approved by: https://github.com/anijain2305, https://github.com/voznesenskym
This is a two part PR; I can split it if you really want me to.
The first part is a refactor of the after aot repro/minifier scripts to come with a command line interface. I maintain exact BC with the previous interface (so, e.g., you still get a repro.py and a run_minifier.py that do the same thing as before), but each of these scripts also take command line arguments now which you can use to customize what actually happens. Check `run_repro` for full documentation on the arguments.
The second part of this is an implementation of `analyze` subcommand on the new CLI for any repro.
<img width="1277" alt="image" src="https://user-images.githubusercontent.com/13564/235045677-8545aab7-5e83-4813-bbec-47783dc60122.png">
This facility is oriented towards accuracy debugging. It does several things:
1. It will run your model twice and check for nondeterminism in inductor/float64, *even* on intermediate inputs (our benchmarking nondeterminism test only checks for nondeterminism on the final output). This makes localizing which operator is nondeterministic easy.
2. It will run your compiled model side-by-side with eager and float64 variants, and then report when things diverge too far from RMSE delta from float64.
Importantly, it does all this without requiring every intermediate to be held in memory (which will cause an OOM on large repros, such as the one I tested this on.)
Some other minor improvements:
* MinifierTestBase now has an easy to comment out spot that you can use to retain the temporary directory; good for debugging
* We print "running minifier" and "running repro" in MinifierTestBase to make it easier to orient where logs are coming from
* same takes a `log_error` optional argument which you can use to reroute the error logs when things mismatch
* counters["inductor"]["intermediate_hooks"] tracks the number of intermediate hooks we've codegen'ed; good for populate the tqdm interface
* torch.fx.interpreter gets an official `boxed_run` interface which uses the boxed arguments calling convention and doesn't retain inputs unnecessarily long
* torch.utils._content_store gets compute_tensor_metadata/read_tensor_metadata helper functions for computing tensor information without serializing it
Signed-off-by: Edward Z. Yang <ezyang@meta.com>
Pull Request resolved: https://github.com/pytorch/pytorch/pull/100226
Approved by: https://github.com/bertmaher, https://github.com/bdhirsh, https://github.com/anijain2305
On top of #95849 this PR is trying to handle the special case when dealing with numpy.
Consider the following example:
```
def f(x: torch.Tensor) -> np.ndarray:
a = x.numpy()
return a.T
```
In previous PR this will error out because we translate `a.T` to be a method call on `torch_np.ndarray.T` which is also a `torch_np.ndarray`.
This PR handles this case, by conditionally converting a `torch_np.ndarray` to `np.ndarray` before returning, to match the original behavior.
The compiled version will be:
```
def f(x):
___tmp_0 = __compiled_fn_0(x)
if isinstance(___tmp_0, torch_np.ndarray):
return ___tmp_0.tensor.numpy()
else:
return ___tmp_0
```
Pull Request resolved: https://github.com/pytorch/pytorch/pull/99560
Approved by: https://github.com/jansel, https://github.com/yanboliang
Issue: #93684
# Problem
Reduce graph breaks when dynamo compiles python functions containing numpy functions and ndarray operations.
# Design (as I know it)
* Use torch_np.ndarray(a wrapper of tensor) to back a `VariableTracker`: `NumpyTensorVariable`.
* Translate all attributes and methods calls, on ndarray, to torch_np.ndarray equivalent.
This PR adds `NumpyTensorVariable` and supports:
1. tensor to ndarray, ndarray to tensor
2. numpy functions such as numpy.meshgrid()
3. ndarray attributes such as `itemsize`, `stride`
Next PR will handle returning `np.ndarray` and add support for ndarray methods
Pull Request resolved: https://github.com/pytorch/pytorch/pull/95849
Approved by: https://github.com/ezyang
Before this PR, if users call ```Conv2d(x)```, dynamo handles it well(no graph break) and puts a ```call_module``` op in the FX graph. However, if users explicitly call ```Conv2d.forward(x)``` in another ```forward``` function, the inlining would be failed(caused graph break). This PR fixed this issue by translating the explicit ```Conv2d.forward(x)``` to ```Conv2d(x)```.
Pull Request resolved: https://github.com/pytorch/pytorch/pull/99015
Approved by: https://github.com/jansel, https://github.com/wconstab
Wrapper for users to insert constraints into model code.
The constraints will not be maintained in the graph after tracing through make_fx so retracing with dynamo/make_fx will not work. This will be supported after torch._assert supported is implemented. Then we can convert the constrain_range calls to torch._asserts.
Pull Request resolved: https://github.com/pytorch/pytorch/pull/98433
Approved by: https://github.com/avikchaudhuri, https://github.com/tugsbayasgalan
Wrapper for users to insert constraints into model code.
The constraints will not be maintained in the graph after tracing through make_fx so retracing with dynamo/make_fx will not work. This will be supported after torch._assert supported is implemented. Then we can convert the constrain_range calls to torch._asserts.
Pull Request resolved: https://github.com/pytorch/pytorch/pull/98433
Approved by: https://github.com/avikchaudhuri, https://github.com/tugsbayasgalan
Summary:
Replace _dynamo.config with an object instead of module
Current usage patterns of setting and reading fields on config will work
unchanged.
Only changes needed going forward:
1. import torch._dynamo.config will not work. However, just doing
import torch._dynamo is sufficient to access dynamo config
as torch._dynamo.config.
2. Files inside of _dynamo folder need to access config via
from torch._dynamo.config_util import config instead of
from torch._dynamo import config. Because _dynamo/__init__.py
imports some of the files so it would be circular import.
Test Plan:
Reviewers:
Subscribers:
Tasks:
Tags:
Fixes #ISSUE_NUMBER
Pull Request resolved: https://github.com/pytorch/pytorch/pull/96455
Approved by: https://github.com/williamwen42
This PR makes basic nnmodule forward hooks work by default, without any overhead. But it leaves silent correctness issues if users modify/remove their hooks later, thus also emits a warning.
- the usual case is to not use hooks, so avoid guard overhead here
- registering any hook before compile will trigger a warning about hook support
- registering a hook later (or removing one) requires user knowledge and opting in,
currently this isn't warnable (but maybe we can observe compiled nnmodules to make it
warnable).
Why skip hook guards by default instead of not tracing __call__/hooks by default?
- avoid having a mode flag that alters dynamo tracing behavior (harder to test both codepaths
in CI with full coverage)
- the most basic hook usecase (registering a hook before compile, and never removing it)
will work by default with this PR, while it would require enablement and incur overhead
in the 'not tracing __call__' proposal.
Pull Request resolved: https://github.com/pytorch/pytorch/pull/98371
Approved by: https://github.com/jansel
This replaces fake_mode_from_tensors but it preferentially looks for
fake_mode in TracingContext and also if there is an active fake mode
on the dispatch stack, before groveling in tensors to find it.
This advances PegasusForCausalLM, which was previously failing because
we generated a graph that had a parameter (non-fake) and a SymInt,
and thus previously we failed to detect the correct fake mode.
Signed-off-by: Edward Z. Yang <ezyang@meta.com>
Pull Request resolved: https://github.com/pytorch/pytorch/pull/98321
Approved by: https://github.com/voznesenskym
**Summary**: profiler.record_function inserts an event into the chrome trace generated by the pytorch profiler. This PR adds record_function everywhere that @dynamo_timed is annotated.
dynamo_timed and the CLI viewer torch._dynamo.utils.compile_times() are already useful on their own; but for identifying _when_ these get called, it's nice to be able to view in the profiler chrome trace.
Why not just turn on python stack traces in the profiler to get this information? Dynamo compilation is implemented in python and therefore produces a huge amount of events when it records compilation steps. The resulting trace files are often too large to load in chrome://tracing, and they take a long time to generate. Additionally, the stack traces are deep enough that they are often hard to read. This approach produces much more readable traces with lower overhead.
**Tests**:
- Added in test/dynamo/test_profiler.py. Verified in https://github.com/pytorch/pytorch/actions/runs/4559322864/jobs/8043307798?pr=96495 that the tests are actually running.
- Performance run with `ciflow/inductor-perf-compare` shows no noticeable change in compilation time or speedup numbers. Geomean speedup changes from 1.275 -> 1.277. Geomean compilation times change from 54.2s -> 53.8s. That's likely just due to noise. All individual benchmark numbers regressed by no more than 5% between the two runs; and we see improvements of around the same magnitude, suggesting this is, again, just noise. For meta employees, you can see the results in a google sheets here: https://docs.google.com/spreadsheets/d/1Ki69XvcgxcA3ZnqC5n_jav5KiD4u7Wojlad3VTnIdlk/edit?usp=sharing
**Example**:
Run this:
```python
import torch
def gn(x):
return x.sin().cos()
def fn(x, y):
return x.sin() * y.cos()
x, y = [torch.rand((2, 2), device='cuda') for _ in range(2)]
# just to clear out any lazy initialization
with torch.profiler.profile() as prof:
torch.compile(gn)(x)
with torch.profiler.profile() as prof:
torch.compile(fn)(x, y)
prof.export_chrome_trace("./dynamo_timed_profile.json")
```
and we can see that the resulting trace shows important dynamo steps, even when python tracing is turned off.
<img width="867" alt="Screenshot 2023-03-29 at 7 26 15 PM" src="https://user-images.githubusercontent.com/5067123/228712263-8ae67ab9-1a52-4765-a9c2-7c5cf0abe2f5.png">
Pull Request resolved: https://github.com/pytorch/pytorch/pull/96495
Approved by: https://github.com/ngimel, https://github.com/mlazos
Summary:
Adds NNC-like logging that is configured through an env var `TORCH_COMPILE_LOGS`
Examples:
`TORCH_LOGS="dynamo,guards" python script.py` - prints dynamo logs at level INFO with guards of all functions that are compiled
`TORCH_LOGS="+dynamo,guards,graph" python script.py` - prints dynamo logs at level DEBUG with guards and graphs (in tabular) format of all graphs that are compiled
[More examples with full output](https://gist.github.com/mlazos/b17f474457308ce15e88c91721ac1cce)
Implementation:
The implementation parses the log settings from the environment, finds any components (aot, dynamo, inductor) or other loggable objects (guards, graph, etc.) and generates a log_state object. This object contains all of the enabled artifacts, and a qualified log name -> level mapping. _init_logs then adds handlers to the highest level logs (the registered logs), and sets any artifact loggers to level DEBUG if the artifact is enabled.
Note: set_logs is an alternative for manipulating the log_state, but if the environment contains TORCH_LOGS, the environment settings will be prioritized.
Adding a new log:
To add a new log, a dev should add their log name to torch._logging._registrations (there are examples there already).
Adding a new artifact:
To add a new artifact, a dev should add their artifact name to torch._logging._registrations as well.
Additionally, wherever the artifact is logged, `torch._logging.getArtifactLogger(__name__, <artifact_name>)` should be used instead of the standard logging implementation.
[design doc](https://docs.google.com/document/d/1ZRfTWKa8eaPq1AxaiHrq4ASTPouzzlPiuquSBEJYwS8/edit#)
Pull Request resolved: https://github.com/pytorch/pytorch/pull/94858
Approved by: https://github.com/ezyang
OK, so this PR used to be about reducing the number of constants we specialize on, but it turns out that unspecialization was ~essentially never used (because we still constant specialized way too aggressively) and I ended up having to fix a bunch of issues to actually get tests to pass. So this PR is now "make int unspecialization actually work". As part of this, I have to turn off unspecialization by default, as there are still latent bugs in inductor.
The general strategy is that an unspecialized int is represented as a SymInt. Representing it as a 0d tensor (which is what the code used to do) is untenable: (1) we often need unspecialized ints to participate in size computations, but we have no way of propagating sympy expressions through tensor compute, and (2) a lot of APIs work when passed SymInt, but not when passed a Tensor. However, I continue to represent Numpy scalars as Tensors, as they are rarely used for size computation and they have an explicit dtype, so they are more accurately modeled as 0d tensors.
* I folded in the changes from https://github.com/pytorch/pytorch/pull/95099 as I cannot represent unspecialized ints as SymInts without also turning on dynamic shapes. This also eliminates the necessity for test_unspec.py, as toggling specialization without dynamic shapes doesn't do anything. As dynamic shapes defaults to unspecializing, I just deleted this entirely; for the specialization case, I rely on regular static shape tests to catch it. (Hypothetically, we could also rerun all the tests with dynamic shapes, but WITH int/float specialization, but this seems... not that useful? I mean, I guess export wants it, but I'd kind of like our Source heuristic to improve enough that export doesn't have to toggle this either.)
* Only 0/1 integers get specialized by default now
* A hodgepodge of fixes. I'll comment on the PR about them.
Fixes https://github.com/pytorch/pytorch/issues/95469
Signed-off-by: Edward Z. Yang <ezyang@meta.com>
Pull Request resolved: https://github.com/pytorch/pytorch/pull/95621
Approved by: https://github.com/jansel, https://github.com/Chillee
This PR allows us to reuse the static per tensor decision making we make at fake tensorification time. We can use this to avoid setting up dynamic dim guards later if the tensor was never a candidate.
Pull Request resolved: https://github.com/pytorch/pytorch/pull/95566
Approved by: https://github.com/ezyang
**Summary**: torch.nn.Module implementations previously did not support custom implementations of `__getattr__`; if a torch.nn.Module subclass implemented `__getattr__` and we tried to access an attribute that was expected to be present in `__getattr__`, dynamo would not check `__getattr__` and would error out with an AttributeError. This PR copies the functionality from UserDefinedObjectVariable into torch.nn.Module so that it also supports `__getattr__`
Example of a module which previously would fail:
```python
class MyMod(torch.nn.Module):
def __init__(self):
super().__init__()
self.custom_dict = {"queue": [torch.rand((2, 2)) for _ in range(3)]}
self.other_attr = torch.rand((2, 2))
def __getattr__(self, name):
custom_dict = self.custom_dict
if name in custom_dict:
return custom_dict[name]
return super().__getattr__(name)
def forward(self, x):
return x @ self.other_attr + self.queue[-1]
```
Pull Request resolved: https://github.com/pytorch/pytorch/pull/94658
Approved by: https://github.com/yanboliang, https://github.com/jansel
