* Automatically applies ruff rule 401. Turns loops into equivalent list comprehensions which are faster and do not leak the scope of the loop variables.
* list comprehensions not only often have better typing, but are 50+% faster than for loops on overhead. They also preserve length information etc and are better for the interpreter to optimize.
* Manually went back and made mypy happy after the change.
* Also fixed style lints in files covered by flake8 but not by pyfmt
Pull Request resolved: https://github.com/pytorch/pytorch/pull/140980
Approved by: https://github.com/justinchuby, https://github.com/malfet
This patch addresses the renaming part of #133027, specifically, it
renames the following and adds documentation for relevant classes.
1. `VariableTracker.mutable_local` to `mutation_type`
2. `MatableLocal `to `ValueMutationNew`
3. `MutableSideEffects `to `ValueMutationExisting`
4. `MutableLocalSource` to `SourceType`
5. `MutableLocalSource.Local` to `New`
Note that (2), (3) and (5) are mainly to bring consistency between them
and `AttributeMutationNew`, `AttributeMutationExisting`.
Pull Request resolved: https://github.com/pytorch/pytorch/pull/139339
Approved by: https://github.com/jansel, https://github.com/mlazos, https://github.com/anijain2305
## The problem
In a typical debugger, `repr()` is used to display variables and not `str()`.
Several classes in Dynamo have a `__str__()` method that returns useful information and a `__repr__()` that does not. Having to call `str(x)` or `[str(i) for i in x]` in the debugger all the time is a chore.
`str()` should be ["informal, nicely printable"](https://docs.python.org/3/library/stdtypes.html#str) and `repr()` should ["attempt to return a string that would yield an object with the same value when passed to eval()](https://docs.python.org/3/library/functions.html#repr)".
## The solution
In the Python object model, if there is no `__str__` method, `__repr__` is used instead (but not the other way around).
So renaming `__str__` to `__repr__` in a few cases where no `__repr__` method exists now should not change observable behavior, and should make debugging easier.
The specific classes changed were all in `torch._dynamo.variables`:
* `builtin.BuiltinVariable`
* `constant.ConstantVariable`
* `constant.EnumVariable`
* `functions.UserMethodVariable`
* `lazy.LazyVariableTracker`
* `lazy.LazySymNodeFormatString`
* `misc.GetAttrVariable`
* `misc.NullVariable`
* `user_defined.UserDefinedObjectVariable`
Pull Request resolved: https://github.com/pytorch/pytorch/pull/136316
Approved by: https://github.com/XuehaiPan, https://github.com/jansel
## `VariableTracker::build()` hides the Builders
### The problem
In the current code, creating a `VariableTracker` involves choosing one of two `Builder` classes and either calling a method, or calling a constructor that creates an object that you immediately call, [like this](083c9149b7/torch/_dynamo/variables/functions.py (L761-L768)).
Variations on this code are repeated in many places.
More, the `Builder` classes have a lot of dependencies, so they have to be loaded late in the whole import process to avoid circular imports, so they end up being repeatedly imported at local scope.
### The solution
In this commit, the import from `builder` and the logic of choosing and calling the Builder class are hidden in a single static factory method, `VariableTracker.build()`, easier to reason about and to import.
This commit net lowers the total lines of code by over 150 lines by removing repetitive logic and unnecessary local imports.
**CHANGES:** Originally the name of the static method was `VariableTracker.create()` but a static method on a derived class, `LazyVariableTracker.create()` now exists with a different signature that's irreconcilable, so the new static method was renamed to `VariableTracker.build()`.
Pull Request resolved: https://github.com/pytorch/pytorch/pull/135714
Approved by: https://github.com/jansel
PyStructSequence is the C API equivalent for `collections.namedtuple` in Python. But they have different constructors:
```python
tuple = NamedTupleType(*args)
tuple = NamedTupleType._make(args)
tuple = StructSequenceType(args)
```
Pull Request resolved: https://github.com/pytorch/pytorch/pull/137776
Approved by: https://github.com/jansel
This PR implements tracing of with contexts with TorchFunction modes which have the default enter/exit behavior (ie pushing/popping the mode)
Typically the bytecode for a context manager looks like this during a graph break:
1. graph call
2. enter context
3. unsupported code
4. exit context
5. resume call
resume fn structure:
1. enter context
2. jump
...
3. exit context
The issue with torch function modes is that side effects will replay any mutations to the torch function stack performed during tracing. So, we do not need to enter and exit around the unsupported code in the original function (doing so would result in a duplicate torch function mode entry during execution of the unsupported code), and we don't need to enter again in the resume function (the mode that was pushed from the side effects bytecode would still be on the stack).
So for torch function modes the structure of our output code is this:
1. graph call
2. mutate tf mode stack to replay mutations
4. unsupported code
5. on exception restore stack
6. resume function
Then our resume fn looks like this:
1. no-op enter torch function mode
2. jump
3. exit tf mode
To implement the no-op enter of the torch function mode I added torch function mode in polyfill which no-op enters, but normally exits. This is needed because we still want to trace the with context in the resume function, and exit properly (the exit instructions will still be in the function, so we need to generate instructions to set up the context).
Separately from the bytecode, dynamo also tracks contexts on the block stack, which is how the SETUP_* instructions are implemented. Naturally at a graph break, we exit these block stacks to properly reset the contexts entirely, so that we can re-enter around the unsupported code soundly. However once again, in the torch function mode case, in the event of a graph we do not want to perform any exit side effects because we want to preserve the state of the mode stack as is so that we will properly update the stack with bytecode mentioned in the first section. If we exited here, dynamo would pop the mode off of the symbolic stack, and not update the true python torch function mode stack with the suffix bytecode. All in all, for torch function modes we enter exactly once, update the global torch function mode stack with side effects bytecode, re-read this stack when compiling the resume function, and exit exactly once in the resume function. This matches the semantics of eager exactly.
Approved by: https://github.com/williamwen42
ghstack dependencies: #134732, #133137, #135443, #135444
Pull Request resolved: https://github.com/pytorch/pytorch/pull/137114
Approved by: https://github.com/yanboliang
This PR implements tracing of with contexts with TorchFunction modes which have the default enter/exit behavior (ie pushing/popping the mode)
Typically the bytecode for a context manager looks like this during a graph break:
1. graph call
2. enter context
3. unsupported code
4. exit context
5. resume call
resume fn structure:
1. enter context
2. jump
...
3. exit context
The issue with torch function modes is that side effects will replay any mutations to the torch function stack performed during tracing. So, we do not need to enter and exit around the unsupported code in the original function (doing so would result in a duplicate torch function mode entry during execution of the unsupported code), and we don't need to enter again in the resume function (the mode that was pushed from the side effects bytecode would still be on the stack).
So for torch function modes the structure of our output code is this:
1. graph call
2. mutate tf mode stack to replay mutations
4. unsupported code
5. on exception restore stack
6. resume function
Then our resume fn looks like this:
1. no-op enter torch function mode
2. jump
3. exit tf mode
To implement the no-op enter of the torch function mode I added torch function mode in polyfill which no-op enters, but normally exits. This is needed because we still want to trace the with context in the resume function, and exit properly (the exit instructions will still be in the function, so we need to generate instructions to set up the context).
Separately from the bytecode, dynamo also tracks contexts on the block stack, which is how the SETUP_* instructions are implemented. Naturally at a graph break, we exit these block stacks to properly reset the contexts entirely, so that we can re-enter around the unsupported code soundly. However once again, in the torch function mode case, in the event of a graph we do not want to perform any exit side effects because we want to preserve the state of the mode stack as is so that we will properly update the stack with bytecode mentioned in the first section. If we exited here, dynamo would pop the mode off of the symbolic stack, and not update the true python torch function mode stack with the suffix bytecode. All in all, for torch function modes we enter exactly once, update the global torch function mode stack with side effects bytecode, re-read this stack when compiling the resume function, and exit exactly once in the resume function. This matches the semantics of eager exactly.
Approved by: https://github.com/williamwen42
ghstack dependencies: #134732, #133137, #135443, #135444
Pull Request resolved: https://github.com/pytorch/pytorch/pull/137114
Approved by: https://github.com/yanboliang
This reverts commit 7743149b2b.
Reverts
* https://github.com/pytorch/pytorch/pull/135503
* https://github.com/pytorch/pytorch/pull/135502
* https://github.com/pytorch/pytorch/pull/135422
This passes this test. Earlier, the getitem would stay like a getitem in the Fx graph. But now the fake tensor propagations fails saying that .item is called. It seems that torch function is not getting triggered while fake tensor propagation.
```
import torch
from torch.nn.attention.flex_attention import BlockMask, _mask_mod_signature, _score_mod_signature, flex_attention
from torch._inductor.lowering import make_pointwise, register_lowering
from torch._inductor.virtualized import ops
from torch.nn.attention.flex_attention import create_block_mask
torch.set_default_device('cuda')
flex_attention = torch.compile(flex_attention, dynamic=False)
prefix_lengths = torch.arange(8)
def prefix_lm(b, h, q, kv):
return prefix_lengths[b] >= kv
mask = create_block_mask(prefix_lm, 8, None, 512, 512, _compile=True)
```
Pull Request resolved: https://github.com/pytorch/pytorch/pull/136590
Approved by: https://github.com/Chillee
This PR implements tracing of with contexts with TorchFunction modes which have the default enter/exit behavior (ie pushing/popping the mode)
Typically the bytecode for a context manager looks like this during a graph break:
1. graph call
2. enter context
3. unsupported code
4. exit context
5. resume call
resume fn structure:
1. enter context
2. jump
...
3. exit context
The issue with torch function modes is that side effects will replay any mutations to the torch function stack performed during tracing. So, we do not need to enter and exit around the unsupported code in the original function (doing so would result in a duplicate torch function mode entry during execution of the unsupported code), and we don't need to enter again in the resume function (the mode that was pushed from the side effects bytecode would still be on the stack).
So for torch function modes the structure of our output code is this:
1. graph call
2. mutate tf mode stack to replay mutations
4. unsupported code
5. on exception restore stack
6. resume function
Then our resume fn looks like this:
1. no-op enter torch function mode
2. jump
3. exit tf mode
To implement the no-op enter of the torch function mode I added torch function mode in polyfill which no-op enters, but normally exits. This is needed because we still want to trace the with context in the resume function, and exit properly (the exit instructions will still be in the function, so we need to generate instructions to set up the context).
Separately from the bytecode, dynamo also tracks contexts on the block stack, which is how the SETUP_* instructions are implemented. Naturally at a graph break, we exit these block stacks to properly reset the contexts entirely, so that we can re-enter around the unsupported code soundly. However once again, in the torch function mode case, in the event of a graph we do not want to perform any exit side effects because we want to preserve the state of the mode stack as is so that we will properly update the stack with bytecode mentioned in the first section. If we exited here, dynamo would pop the mode off of the symbolic stack, and not update the true python torch function mode stack with the suffix bytecode. All in all, for torch function modes we enter exactly once, update the global torch function mode stack with side effects bytecode, re-read this stack when compiling the resume function, and exit exactly once in the resume function. This matches the semantics of eager exactly.
Pull Request resolved: https://github.com/pytorch/pytorch/pull/135422
Approved by: https://github.com/williamwen42
ghstack dependencies: #134732, #133137, #135443, #135444
In preparation for tracing through DeviceContext (defb515306/torch/utils/_device.py (L66))
This PR adds support for calling the setattr of thread local objects. These objects have a slots impl, and since this doesn't appear to have any side effects, we call this setattr impl when replaying mutations, since calling `object.__setattr__` on these objects results in a type error.
Pull Request resolved: https://github.com/pytorch/pytorch/pull/135443
Approved by: https://github.com/anijain2305
ghstack dependencies: #134732, #133137
This PR implements tracing of with contexts with TorchFunction modes which have the default enter/exit behavior (ie pushing/popping the mode)
Typically the bytecode for a context manager looks like this during a graph break:
1. graph call
2. enter context
3. unsupported code
4. exit context
5. resume call
resume fn structure:
1. enter context
2. jump
...
3. exit context
The issue with torch function modes is that side effects will replay any mutations to the torch function stack performed during tracing. So, we do not need to enter and exit around the unsupported code in the original function (doing so would result in a duplicate torch function mode entry during execution of the unsupported code), and we don't need to enter again in the resume function (the mode that was pushed from the side effects bytecode would still be on the stack).
So for torch function modes the structure of our output code is this:
1. graph call
2. mutate tf mode stack to replay mutations
4. unsupported code
5. on exception restore stack
6. resume function
Then our resume fn looks like this:
1. no-op enter torch function mode
2. jump
3. exit tf mode
To implement the no-op enter of the torch function mode I added torch function mode in polyfill which no-op enters, but normally exits. This is needed because we still want to trace the with context in the resume function, and exit properly (the exit instructions will still be in the function, so we need to generate instructions to set up the context).
Separately from the bytecode, dynamo also tracks contexts on the block stack, which is how the SETUP_* instructions are implemented. Naturally at a graph break, we exit these block stacks to properly reset the contexts entirely, so that we can re-enter around the unsupported code soundly. However once again, in the torch function mode case, in the event of a graph we do not want to perform any exit side effects because we want to preserve the state of the mode stack as is so that we will properly update the stack with bytecode mentioned in the first section. If we exited here, dynamo would pop the mode off of the symbolic stack, and not update the true python torch function mode stack with the suffix bytecode. All in all, for torch function modes we enter exactly once, update the global torch function mode stack with side effects bytecode, re-read this stack when compiling the resume function, and exit exactly once in the resume function. This matches the semantics of eager exactly.
Pull Request resolved: https://github.com/pytorch/pytorch/pull/135422
Approved by: https://github.com/williamwen42
ghstack dependencies: #134732, #133137, #135443, #135444
In preparation for tracing through DeviceContext (defb515306/torch/utils/_device.py (L66))
This PR adds support for calling the setattr of thread local objects. These objects have a slots impl, and since this doesn't appear to have any side effects, we call this setattr impl when replaying mutations, since calling `object.__setattr__` on these objects results in a type error.
Pull Request resolved: https://github.com/pytorch/pytorch/pull/135443
Approved by: https://github.com/anijain2305
ghstack dependencies: #134732, #133137
This PR implements tracing of with contexts with TorchFunction modes which have the default enter/exit behavior (ie pushing/popping the mode)
Typically the bytecode for a context manager looks like this during a graph break:
1. graph call
2. enter context
3. unsupported code
4. exit context
5. resume call
resume fn structure:
1. enter context
2. jump
...
3. exit context
The issue with torch function modes is that side effects will replay any mutations to the torch function stack performed during tracing. So, we do not need to enter and exit around the unsupported code in the original function (doing so would result in a duplicate torch function mode entry during execution of the unsupported code), and we don't need to enter again in the resume function (the mode that was pushed from the side effects bytecode would still be on the stack).
So for torch function modes the structure of our output code is this:
1. graph call
2. mutate tf mode stack to replay mutations
4. unsupported code
5. on exception restore stack
6. resume function
Then our resume fn looks like this:
1. no-op enter torch function mode
2. jump
3. exit tf mode
To implement the no-op enter of the torch function mode I added torch function mode in polyfill which no-op enters, but normally exits. This is needed because we still want to trace the with context in the resume function, and exit properly (the exit instructions will still be in the function, so we need to generate instructions to set up the context).
Separately from the bytecode, dynamo also tracks contexts on the block stack, which is how the SETUP_* instructions are implemented. Naturally at a graph break, we exit these block stacks to properly reset the contexts entirely, so that we can re-enter around the unsupported code soundly. However once again, in the torch function mode case, in the event of a graph we do not want to perform any exit side effects because we want to preserve the state of the mode stack as is so that we will properly update the stack with bytecode mentioned in the first section. If we exited here, dynamo would pop the mode off of the symbolic stack, and not update the true python torch function mode stack with the suffix bytecode. All in all, for torch function modes we enter exactly once, update the global torch function mode stack with side effects bytecode, re-read this stack when compiling the resume function, and exit exactly once in the resume function. This matches the semantics of eager exactly.
Pull Request resolved: https://github.com/pytorch/pytorch/pull/135422
Approved by: https://github.com/williamwen42
ghstack dependencies: #134732, #133137, #135443, #135444
In preparation for tracing through DeviceContext (defb515306/torch/utils/_device.py (L66))
This PR adds support for calling the setattr of thread local objects. These objects have a slots impl, and since this doesn't appear to have any side effects, we call this setattr impl when replaying mutations, since calling `object.__setattr__` on these objects results in a type error.
Pull Request resolved: https://github.com/pytorch/pytorch/pull/135443
Approved by: https://github.com/anijain2305
ghstack dependencies: #134732, #133137
In preparation for tracing through DeviceContext (defb515306/torch/utils/_device.py (L66))
This PR adds support for calling the setattr of thread local objects. These objects have a slots impl, and since this doesn't appear to have any side effects, we call this setattr impl when replaying mutations, since calling `object.__setattr__` on these objects results in a type error.
Pull Request resolved: https://github.com/pytorch/pytorch/pull/135443
Approved by: https://github.com/anijain2305
ghstack dependencies: #134732, #133137
Fixes https://github.com/pytorch/pytorch/issues/114389
Previously, dynamo would attempt to trace through the `__init__` of traceable tensor subclasses, since their constructors are AOT dispatcher traceable by definition, dynamo should automatically put these in the graph like we do for any other tensors. Not doing this is difficult because dynamo would need to apply mutations post tensor subclass creation in the graph.
Pull Request resolved: https://github.com/pytorch/pytorch/pull/135151
Approved by: https://github.com/bdhirsh
