This PR reorganizes the `react-dom` entrypoint to only pull in code that
is environment agnostic. Previously if you required anything from this
entrypoint in any environment the entire client reconciler was loaded.
In a prior release we added a server rendering stub which you could
alias in server environments to omit this unecessary code. After landing
this change this entrypoint should not load any environment specific
code.
While a few APIs are truly client (browser) only such as createRoot and
hydrateRoot many of the APIs you import from this package are only
useful in the browser but could concievably be imported in shared code
(components running in Fizz or shared components as part of an RSC app).
To avoid making these require opting into the client bundle we are
keeping them in the `react-dom` entrypoint and changing their
implementation so that in environments where they are not particularly
useful they do something benign and expected.
#### Removed APIs
The following APIs are being removed in the next major. Largely they
have all been deprecated already and are part of legacy rendering modes
where concurrent features of React are not available
* `render`
* `hydrate`
* `findDOMNode`
* `unmountComponentAtNode`
* `unstable_createEventHandle`
* `unstable_renderSubtreeIntoContainer`
* `unstable_runWithPrioirty`
#### moved Client APIs
These APIs were available on both `react-dom` (with a warning) and
`react-dom/client`. After this change they are only available on
`react-dom/client`
* `createRoot`
* `hydrateRoot`
#### retained APIs
These APIs still exist on the `react-dom` entrypoint but have normalized
behavior depending on which renderers are currently in scope
* `flushSync`: will execute the function (if provided) inside the
flushSync implemention of FlightServer, Fizz, and Fiber DOM renderers.
* `unstable_batchedUpdates`: This is a noop in concurrent mode because
it is now the only supported behavior because there is no legacy
rendering mode
* `createPortal`: This just produces an object. It can be called from
anywhere but since you will probably not have a handle on a DOM node to
pass to it it will likely warn in environments other than the browser
* preloading APIS such as `preload`: These methods will execute the
preload across all renderers currently in scope. Since we resolve the
Request object on the server using AsyncLocalStorage or the current
function stack in practice only one renderer should act upon the
preload.
In addition to these changes the server rendering stub now just rexports
everything from `react-dom`. In a future minor we will add a warning
when using the stub and in the next major we will remove the stub
altogether
In React 19 React will finally stop publishing UMD builds. This is
motivated primarily by the lack of use of UMD format and the added
complexity of maintaining build infra for these releases. Additionally
with ESM becoming more prevalent in browsers and services like esm.sh
which can host React as an ESM module there are other options for doing
script tag based react loading.
This PR removes all the UMD build configs and forks.
There are some fixtures that still have references to UMD builds however
many of them already do not work (for instance they are using legacy
features like ReactDOM.render) and rather than block the removal on
these fixtures being brought up to date we'll just move forward and fix
or removes fixtures as necessary in the future.
## Overview
**Internal React repo tests only**
Depends on https://github.com/facebook/react/pull/28710
Adds three new assertions:
- `assertConsoleLogDev`
- `assertConsoleWarnDev`
- `assertConsoleErrorDev`
These will replace this pattern:
```js
await expect(async () => {
await expect(async () => {
await act(() => {
root.render(<Fail />)
});
}).toThrow();
}).toWarnDev('Warning');
```
With this:
```js
await expect(async () => {
await act(() => {
root.render(<Fail />)
});
}).toThrow();
assertConsoleWarnDev('Warning');
```
It works similar to our other `assertLog` matchers which clear the log
and assert on it, failing the tests if the log is not asserted before
the test ends.
## Diffs
There are a few improvements I also added including better log diffs and
more logging.
When there's a failure, the output will look something like:
<img width="655" alt="Screenshot 2024-04-03 at 11 50 08 AM"
src="https://github.com/facebook/react/assets/2440089/0c4bf1b2-5f63-4204-8af3-09e0c2d752ad">
Check out the test suite for snapshots of all the failures we may log.
Previously if the external runtime was enabled Fizz tests would use it
exclusively. However now that this flag is enabled for OSS and Meta
builds this means we were no longer testing the inline script runtime.
This changes the test flags to produce some runs where we test the
inline script runtime and others where we test the external runtime
the external runtime will be tested if the flag is enabled and
* Meta Builds: variant is true
* OSS Builds: experiemental is true
this gives us decent coverage. long term we should probably bring
variant to OSS builds since we will eventually want to test both modes
even when the external runtime is stable.
This is similar to #28771 but for isomorphic. We need a make over for
these dispatchers anyway so this is the first step. Also helps flush out
some internals usage that will break anyway.
It flattens the inner mutable objects onto the ReactSharedInternals.
Moving this to `internal-test-utils` so I can add helpers in the next PR
for:
- assertLogDev
- assertWarnDev
- assertErrorDev
Which will be exported from `internal-test-utils`. This isn't strictly
necessary, but it makes the factoring nicer, so internal-test-until
doesn't need to depend on `scripts/jest`.
Stacked on top of #28498 for test fixes.
### Don't Rethrow
When we started React it was 1:1 setState calls a series of renders and
if they error, it errors where the setState was called. Simple. However,
then batching came and the error actually got thrown somewhere else.
With concurrent mode, it's not even possible to get setState itself to
throw anymore.
In fact, all APIs that can rethrow out of React are executed either at
the root of the scheduler or inside a DOM event handler.
If you throw inside a React.startTransition callback that's sync, then
that will bubble out of the startTransition but if you throw inside an
async callback or a useTransition we now need to handle it at the hook
site. So in 19 we need to make all React.startTransition swallow the
error (and report them to reportError).
The only one remaining that can throw is flushSync but it doesn't really
make sense for it to throw at the callsite neither because batching.
Just because something rendered in this flush doesn't mean it was
rendered due to what was just scheduled and doesn't mean that it should
abort any of the remaining code afterwards. setState is fire and forget.
It's send an instruction elsewhere, it's not part of the current
imperative code.
Error boundaries never rethrow. Since you should really always have
error boundaries, most of the time, it wouldn't rethrow anyway.
Rethrowing also actually currently drops errors on the floor since we
can only rethrow the first error, so to avoid that we'd need to call
reportError anyway. This happens in RN events.
The other issue with rethrowing is that it logs an extra console.error.
Since we're not sure that user code will actually log it anywhere we
still log it too just like we do with errors inside error boundaries
which leads all of these to log twice.
The goal of this PR is to never rethrow out of React instead, errors
outside of error boundaries get logged to reportError. Event system
errors too.
### Breaking Changes
The main thing this affects is testing where you want to inspect the
errors thrown. To make it easier to port, if you're inside `act` we
track the error into act in an aggregate error and then rethrow it at
the root of `act`. Unlike before though, if you flush synchronously
inside of act it'll still continue until the end of act before
rethrowing.
I expect most user code breakages would be to migrate from `flushSync`
to `act` if you assert on throwing.
However, in the React repo we also have `internalAct` and the
`waitForThrow` helpers. Since these have to use public production
implementations we track these using the global onerror or process
uncaughtException. Unlike regular act, includes both event handler
errors and onRecoverableError by default too. Not just render/commit
errors. So I had to account for that in our tests.
We restore logging an extra log for uncaught errors after the main log
with the component stack in it. We use `console.warn`. This is not yet
ignorable if you preventDefault to the main error event. To avoid
confusion if you don't end up logging the error to console I just added
`An error occurred`.
### Polyfill
All browsers we support really supports `reportError` but not all test
and server environments do, so I implemented a polyfill for browser and
node in `shared/reportGlobalError`. I don't love that this is included
in all builds and gets duplicated into isomorphic even though it's not
actually needed in production. Maybe in the future we can require a
polyfill for this.
### Follow Ups
In a follow up, I'll make caught vs uncaught error handling be
configurable too.
---------
Co-authored-by: Ricky Hanlon <rickhanlonii@gmail.com>
Stacked on #28458.
This doesn't actually really change the messages yet, it's just a
refactor.
Hydration warnings can be presented either as HTML or React JSX format.
If presented as HTML it makes more sense to make that a DOM specific
concept, however, I think it's actually better to present it in terms of
React JSX.
Most of the time the errors aren't going to be something messing with
them at the HTML/HTTP layer. It's because the JS code does something
different. Most of the time you're working in just React. People don't
necessarily even know what the HTML form of it looks like. So this takes
the approach that the warnings are presented in React JSX in their rich
object form.
Therefore, I'm moving the approach to yield diff data to the reconciler
but it's the reconciler that's actually printing all the warnings.
## Summary
Based on
- https://github.com/facebook/react/pull/27903
This PR
- Silence warning in React tests
- Turn on flag
We want to finish cleaning up internal RTR usage, but let's prioritize
the deprecation process. We do this by silencing the internal warning
for now.
## How did you test this change?
`yarn build`
`yarn test ReactHooksInspectionIntegration -b`
## Overview
The error messages that say:
> ReactDOM.hydrate is no longer supported in React 18
Don't make sense in the React 19 release. Instead, they should say:
> ReactDOM.hydrate was removed in React 19.
For legacy mode, they should say:
> ReactDOM.hydrate has not been supported since React 18.
If a global error event is dispatched during a test, Jest reports that
test as a failure.
Our `@gate` pragma feature should account for this — if the gate
condition is false, and the global error event is dispatched, then the
test should be reported as a success.
The solution is to install an error event handler right before invoking
the test function. Because we install our own handler, Jest will not
report the test as a failure if a global error event is dispatched; it's
conceptually as if we wrapped the whole test event in a try-catch.
We broke the ability to "break on uncaught exceptions" by adding a
try/catch higher up in the scheduling. We're giving up on fixing that so
we can remove the replay trick inside an event handler.
The issue with that approach is that we end up double logging a lot of
errors in DEV since they get reported to the page.
It's also a lot of complexity around this feature.
When developing in an RSC environment, you should be able to work in a
single environment as if it was a unified environment. With thrown
errors we already serialize them and then rethrow them on the client.
Since by default we log them via onError both in Flight and Fizz, you
can get the same log in the RSC runtime, the SSR runtime and on the
client.
With console logs made in SSR renders, you typically replay the same
code during hydration on the client. So for example warnings already
show up both in the SSR logs and on the client (although not guaranteed
to be the same). You could just spend your time in the client and you'd
be fine.
Previously, RSC logs would not be replayed because they don't hydrate.
So it's easy to miss warnings for example.
With this approach, we replay RSC logs both during SSR so they end up in
the SSR logs and on the client. That way you can just stay in the
browser window during normal development cycles. You shouldn't have to
care if your component is a server or client component when working on
logical things or iterating on a product.
With this change, you probably should mostly ignore the Flight log
stream and just look at the client or maybe the SSR one. Unless you're
digging into something specific. In particular if you just naively run
both Flight and Fizz in the same terminal you get duplicates. I like to
run out fixtures `yarn dev:region` and `yarn dev:global` in two separate
terminals.
Console logs may contain complex objects which can be inspected. Ideally
a DevTools inspector could reach into the RSC server and remotely
inspect objects using the remote inspection protocol. That way complex
objects can be loaded on demand as you expand into them. However, that
is a complex environment to set up and the server might not even be
alive anymore by the time you inspect the objects. Therefore, I do a
best effort to serialize the objects using the RSC protocol but limit
the depth that can be rendered.
This feature is only own in dev mode since it can be expensive.
In a follow up, I'll give the logs a special styling treatment to
clearly differentiate them from logs coming from the client. As well as
deal with stacks.
Depends on:
- #28317
- #28320
---
Changes the behavior of the JSX runtime to pass through `ref` as a
normal prop, rather than plucking it from the props object and storing
on the element.
This is a breaking change since it changes the type of the receiving
component. However, most code is unaffected since it's unlikely that a
component would have attempted to access a `ref` prop, since it was not
possible to get a reference to one.
`forwardRef` _will_ still pluck `ref` from the props object, though,
since it's extremely common for users to spread the props object onto
the inner component and pass `ref` as a differently named prop. This is
for maximum compatibility with existing code — the real impact of this
change is that `forwardRef` is no longer required.
Currently, refs are resolved during child reconciliation and stored on
the fiber. As a result of this change, we can move ref resolution to
happen only much later, and only for components that actually use them.
Then we can remove the `ref` field from the Fiber type. I have not yet
done that in this step, though.
Instead of createElement.
We should have done this when we initially released jsx-runtime but
better late than never. The general principle is that our tests should
be written using the most up-to-date idioms that we recommend for users,
except when explicitly testing an edge case or legacy behavior, like for
backwards compatibility.
Most of the diff is related to tweaking test output and isn't very
interesting.
I did have to workaround an issue related to component stacks. The
component stack logic depends on shared state that lives in the React
module. The problem is that most of our tests reset the React module
state and re-require a fresh instance of React, React DOM, etc. However,
the JSX runtime is not re-required because it's injected by the compiler
as a static import. This means its copy of the shared state is no longer
the same as the one used by React, causing any warning logged by the JSX
runtime to not include a component stack. (This same issue also breaks
string refs, but since we're removing those soon I'm not so concerned
about that.) The solution I went with for now is to mock the JSX runtime
with a proxy that re-requires the module on every function invocation. I
don't love this but it will have to do for now. What we should really do
is migrate our tests away from manually resetting the module state and
use import syntax instead.
Partially reverting what has been removed in
https://github.com/facebook/react/pull/28186.
We need `'scheduler/tracing'` mock for React >= 16.8.
The error:
```
Invariant Violation: It is not supported to run the profiling version of a renderer (for example, `react-dom/profiling`) without also replacing the `scheduler/tracing` module with `scheduler/tracing-profiling`. Your bundler might have a setting for aliasing both modules. Learn more at http://fb.me/react-profiling
```
Validated by running regression tests for the whole version matrix:
```
./scripts/circleci/download_devtools_regression_build.js 16.0 --replaceBuild && node ./scripts/jest/jest-cli.js --build --project devtools --release-channel=experimental --reactVersion 16.0 --ci && ./scripts/circleci/download_devtools_regression_build.js 16.5 --replaceBuild && node ./scripts/jest/jest-cli.js --build --project devtools --release-channel=experimental --reactVersion 16.5 --ci && ./scripts/circleci/download_devtools_regression_build.js 16.8 --replaceBuild && node ./scripts/jest/jest-cli.js --build --project devtools --release-channel=experimental --reactVersion 16.8 --ci && ./scripts/circleci/download_devtools_regression_build.js 17.0 --replaceBuild && node ./scripts/jest/jest-cli.js --build --project devtools --release-channel=experimental --reactVersion 17.0 --ci && ./scripts/circleci/download_devtools_regression_build.js 18.0 --replaceBuild && node ./scripts/jest/jest-cli.js --build --project devtools --release-channel=experimental --reactVersion 18.0 --ci
```
- Moving `act` implementation to a single getter-function, which is
based on React version we are testing RDT against.
- Removing unused mocks for `act`, which were designed for legacy
versions of React, validated with running tests against React 16 build.
## Overview
Adds support for `ReactDOMClient` for `ServerIntegration*` tests.
Also converts tests that pass without any other changes. Will follow up
with other PRs for more complex cases.
There's no need to separate strict mode from strict effects mode any
more.
I didn't clean up the `StrictEffectMode` fiber flag, because it's used
to prevent strict effects in legacy mode. I could replace those checks
with `LegacyMode` checks, but when we remove legacy mode, we can remove
that flag and condense them into one StrictMode flag away.
These were made dynamic again in
https://github.com/facebook/react/pull/27919, and already have the
dynamic flags set. It's a bummer to push this around, we should come up
with a better way.
The internal file ReactSharedSubset is what the `react` module resolves
to when imported from a Server Component environment. We gave it this
name because, originally, the idea was that Server Components can access
a subset of the APIs available on the client.
However, since then, we've also added APIs that can _only_ by accessed
on the server and not the client. In other words, it's no longer a
subset, it's a slightly different overlapping set.
So this commit renames ReactSharedSubet to ReactServer and updates all
the references. This does not affect the public API, only our internal
implementation.
I think these have been dead for a while now. If the purpose is
documentation, we should see if we need to improve `yarn test --help` or
something instead.
`Activity` is the current candidate name. This PR starts the rename work
by renaming the exported unstable component name.
NOTE: downstream consumers need to rename the import when updating to
this commit.
I do this by simply renaming the secret export name in the "subset"
bundle and this renamed version is what the FlightServer uses.
This requires us to be more diligent about always using the correct
instance of "react" in our tests so there's a bunch of clean up for
that.
Currently when we SSR a Flight response we do not emit any resources for
module imports. This means that when the client hydrates it won't have
already loaded the necessary scripts to satisfy the Imports defined in
the Flight payload which will lead to a delay in hydration completing.
This change updates `react-server-dom-webpack` and
`react-server-dom-esm` to emit async script tags in the head when we
encounter a modules in the flight response.
To support this we need some additional server configuration. We need to
know the path prefix for chunk loading and whether the chunks will load
with CORS or not (and if so with what configuration).
Since we're not using haste at all, we can just remove the config to
disable haste instead of enabling, just to inject an implementation that
blocks any haste modules from being recognized.
Test Plan:
Creating a module and required it to get the expected error that the
module doesn't exist.
Search for more generic fork files if an exact match does not exist. If
`forks/MyFile.dom.js` exists but `forks/MyFile.dom-node.js` does not
then use it when trying to resolve forks for the `"dom-node"` renderer
in flow, tests, and build
consolidate certain fork files that were identical and make semantic
sense to be generalized
add `dom-browser-esm` bundle and use it for
`react-server-dom-esm/client.browser` build
Modern runtimes support native async/await, as does the version of Node
we use for our tests. To match how most of our users run React, this
disables the transpilation of async/await in our test suite.
This PR contains a regression test and two separate fixes: a targeted
fix, and a more general one that's designed as a last-resort guard
against these types of bugs (both bugs in app code and bugs in React).
I confirmed that each of these fixes separately are sufficient to fix
the regression test I added.
We can't realistically detect all infinite update loop scenarios because
they could be async; even a single microtask can foil our attempts to
detect a cycle. But this improves our strategy for detecting the most
common kind.
See commit messages for more details.
## Summary
Running `yarn test --project devtools --build` currently skips all
non-gated (without `@reactVersion` directives) devtools tests. This is
not expected behaviour, these changes are fixing it.
There were multiple related PRs to it:
- https://github.com/facebook/react/pull/26742
- https://github.com/facebook/react/pull/25712
- https://github.com/facebook/react/pull/24555
With these changes, the resulting behaviour will be:
- If `REACT_VERSION` env variable is specified:
- jest will not include all non-gated test cases in the test run
- jest will run only a specific test case, when specified
`REACT_VERSION` value satisfies the range defined by `@reactVersion`
directives for this test case
- If `REACT_VERSION` env variable is not specified, jest will run all
non-gated tests:
- jest will include all non-gated test cases in the test run
- jest will run all non-gated test cases, the only skipped test cases
will be those, which specified the range that does not include the next
stable version of react, which will be imported from `ReactVersions.js`
## How did you test this change?
Running `profilingCache` test suite without specifying `reactVersion`
now skips gated (>= 17 & < 18) test
<img width="1447" alt="Screenshot 2023-06-15 at 11 18 22"
src="https://github.com/facebook/react/assets/28902667/cad58994-2cb3-44b3-9eb2-1699c01a1eb3">
Running `profilingCache` test suite with specifying `reactVersion` to
`17` now runs this test case and skips others correctly
<img width="1447" alt="Screenshot 2023-06-15 at 11 20 11"
src="https://github.com/facebook/react/assets/28902667/d308960a-c172-4422-ba6f-9c0dbcd6f7d5">
Running `yarn test --project devtools ...` without specifying
`reactVersion` now runs all non-gated test cases
<img width="398" alt="Screenshot 2023-06-15 at 12 25 12"
src="https://github.com/facebook/react/assets/28902667/2b329634-0efd-4c4c-b460-889696bbc9e1">
Running `yarn test --project devtools ...` with specifying
`reactVersion` (to `17` in this example) now includes only gated tests
<img width="414" alt="Screenshot 2023-06-15 at 12 26 31"
src="https://github.com/facebook/react/assets/28902667/a702c27e-4c35-4b12-834c-e5bb06728997">
## Overview
Does a few things:
- Renames `enableSyncDefaultUpdates` to
`forceConcurrentByDefaultForTesting`
- Changes the way it's used so it's dead-code eliminated separate from
`allowConcurrentByDefault`
- Deletes a bunch of the gated code
The gates that are deleted are unnecessary now. We were keeping them
when we originally thought we would come back to being concurrent by
default. But we've shifted and now sync-by default is the desired
behavior long term, so there's no need to keep all these forked tests
around.
I'll follow up to delete more of the forked behavior if possible.
Ideally we wouldn't need this flag even if we're still using
`allowConcurrentByDefault`.
With df12d7eac4 I accidentally made it so
that tests aren't run with the 2 variant modes for most
SchedulerFeatureFlags anymore. This fixes it with the same approach as
ee4233bdbc.
Test Plan:
Run and notice the boolean flags follow the variant:
```
yarn test-www --variant=true
yarn test-www --variant=false
```
