This treats workInProgressRoot work and rootWithPendingPassiveEffects
the same way. Basically as long as there's some work on the root, yield
the current task. Including passive effects. This means that passive
effects are now a continuation instead of a separate callback. This can
mean they're earlier or later than before. Later for Idle in case
there's other non-React work. Earlier for same Default if there's other
Default priority work.
This makes sense since increasing priority of the passive effects beyond
Idle doesn't really make sense for an Idle render.
However, for any given render at same priority it's more important to
complete this work than start something new.
Since we special case continuations to always yield to the browser, this
has the same effect as #31784 without implementing `requestPaint`. At
least assuming nothing else calls `requestPaint`.
<img width="587" alt="Screenshot 2024-12-14 at 5 37 37 PM"
src="https://github.com/user-attachments/assets/8641b172-8842-4191-8bf0-50cbe263a30c"
/>
This flag controls the strict mode double invoke render/lifecycles/etc
behavior in Strict Mode.
The only place this flag is off is the test renderers, which it should
be on for.
If we can land this, we can follow up to remove the flag.
We introduced the `unstable_useContextWithBailout` API to run compiler
based experiments. This API was designed to be an experiment proxy for
alternative approaches which would be heavier to implement. The
experiment turned out to be inconclusive. Since most of our performance
critical usage is already optimized, we weren't able to find a clear win
with this approach.
Since we don't have further plans for this API, let's clean it up.
When scheduling the initial root and when using
`unstable_scheduleHydration` we should use the Hydration Lanes rather
than the raw update lane. This ensures that we're always hydrating using
a Hydration Lane or the Offscreen Lane rather than other lanes getting
some random hydration in it.
This fixes an issue where updating a root while it is still hydrating
causes it to trigger client rendering when it could just hydrate and
then apply the update on top of that.
It also fixes a potential performance issue where
`unstable_scheduleHydration` gets batched with an update that then ends
up forcing an update of a boundary that requires it to rewind to do the
hydration lane anyway. Might as well just start with the hydration
without the update applied first.
I added a kill switch (`enableHydrationLaneScheduling`) just in case but
seems very safe given that using `unstable_scheduleHydration` at all is
very rare and updating the root before the shell hydrates is extremely
rare (and used to trigger a recoverable error).
A long standing issue for React has been that if you reorder stateful
nodes, they may lose their state and reload. The thing moving loses its
state. There's no way to solve this in general where two stateful nodes
swap.
The [`moveBefore()`
proposal](https://chromestatus.com/feature/5135990159835136?gate=5177450351558656)
has now moved to
[intent-to-ship](https://groups.google.com/a/chromium.org/g/blink-dev/c/YE_xLH6MkRs/m/_7CD0NYMAAAJ).
This function is kind of like `insertBefore` but preserves state.
There's [a demo here](https://state-preserving-atomic-move.glitch.me/).
Ideally we'd port this demo to a fixture so we can try it.
Currently this flag is always off - even in experimental. That's because
this is still behind a Chrome flag so it's a little early to turn it on
even in experimental. So you need a custom build. It's on in RN but only
because it doesn't apply there which makes it easier to tell that it's
safe to ship once it's on everywhere else.
The other reason it's still off is because there's currently a semantic
breaking change. `moveBefore()` errors if both nodes are disconnected.
That happens if we're inside a completely disconnected React root.
That's not usually how you should use React because it means effects
can't read layout etc. However, it is currently supported. To handle
this we'd have to try/catch the `moveBefore` to handle this case but we
hope this semantic will change before it ships. Before we turn this on
in experimental we either have to wait for the implementation to not
error in the disconnected-disconnected case in Chrome or we'd have to
add try/catch.
In preparation for the next RC, I set this feature flag to true
everywhere. I did not delete the feature flag yet, in case there are yet
more bugs to be discovered.
I also didn't remove the dynamic feature flag from the Meta builds; I'll
let the Meta folks handle that.
This flag will be used to gate a new timeline profiler that's integrate
with the Performance Tab and the new performance.measure extensions in
Chrome.
It replaces the existing DevTools feature so this disables
enableSchedulingProfiler when it is enabled since they can interplay in
weird ways potentially.
This means that experimental React now disable scheduling profiler and
enables this new approach.
Insertion effects do not unmount when a subtree is removed while
offscreen.
Current behavior for an insertion effect is if the component goes
- *visible -> removed:* calls insertion effect cleanup
- *visible -> offscreen -> removed:* insertion effect cleanup is never
called
This makes it so we always call insertion effect cleanup when removing
the component.
Likely also fixes https://github.com/facebook/react/issues/26670
---------
Co-authored-by: Rick Hanlon <rickhanlonii@fb.com>
enableHalt turns on a mode for flight prerenders where aborts are
treated like infinitely stalled outcomes while still completing the
prerender. For regular tasks we simply serialize the slot as a promise
that never settles. For ReadableStream, Blob, and Async Iterators we
just never advance the serialization so they remain unfinished when
consumed on the client.
When enableHalt is turned on aborts of prerenders will halt rather than
error. The abort reason is forwarded to the upstream produces of the
aforementioned async iterators, blobs, and ReadableStreams. In the
future if we expose a signal that you can consume from within a render
to cancel additional work the abort reason will also be forwarded there
Persistent renderers used the `Update` effect flag to check if a subtree
needs to be cloned. In some cases, that causes extra renders, such as
when a layout effect is triggered which only has an effect on the JS
side, but doesn't update the host components.
It's been a bit tricky to find the right places where this needs to be
set and I'm not 100% sure I got all the cases even though the tests
passed.
There is currently a mismatch in how the persistent mode JS API and the
Fabric native code interpret `completeRoot`.
This is a short-lived experiment to see the effect of moving the Fabric
`completeRoot` call from `finalizeContainerChildren` to
`replaceContainerChildren` which in some cases does not get called.
**This API is not intended to ship. This is a temporary unstable hook
for internal performance profiling.**
This PR exposes `unstable_useContextWithBailout`, which takes a compare
function in addition to Context. The comparison function is run to
determine if Context propagation and render should bail out earlier.
`unstable_useContextWithBailout` returns the full Context value, same as
`useContext`.
We can profile this API against `useContext` to better measure the cost
of Context value updates and gather more data around propagation and
render performance.
The bailout logic and test cases are based on
https://github.com/facebook/react/pull/20646
Additionally, this implementation allows multiple values to be compared
in one hook by returning a tuple to avoid requiring additional Context
consumer hooks.
Following https://github.com/facebook/react/pull/30436
Concurrent by default strategy has been unshipped. Here we clean up the
`allowConcurrentByDefault` path and related logic/tests.
For now, this keeps the `concurrentUpdatesByDefaultOverride` argument in
`createContainer` and `createHydrationContainer` and ignores the value
to prevent more breaking changes to `react-reconciler` in the RC stage.
Concurrent by default has been unshipped! Let's clean it up.
Here we remove `forceConcurrentByDefaultForTesting`, which allows us to
run tests against both concurrent strategies. In the next PR, we'll
remove the actual concurrent by default code path.
While the goal is to remove legacy context completely, I think we can
already land the removal of legacy context for function components. I
didn't even know this feature existed until reading the code recently.
The win is just a couple of property lookups on function renders, but it
trims down the API already as the full removal will likely still take a
bit more time.
www: Starting with enabled test renderer and a feature flag for
production rollout.
RN: Not enabled, will follow up on this.
Object literals should be faster at least on React Native with Hermes as
the JS engine.
It might also be interesting to confirm the old comments in this file
from years ago are even still valid. Creating an object from a literal
should be a simpler operation.
It's a bit unfortunate that this introduces a bunch of copied code, but
since we rearely update the fields on fibers, this seems like an okay
tradeoff for a hot code path. An alternative would be some sort of macro
system, but that doesn't seem worth the extra complexity.
## Summary
We currently do deep diffing for object props, and also use custom
differs, if they are defined, for props with custom attribute config.
The idea is to simply do a `===` comparison instead of all that work. We
will do less computation on the JS side, but send more data to native.
The hypothesis is that this change should be neutral in terms of
performance. If that's the case, we'll be able to get rid of custom
differs, and be one step closer to deleting view configs.
This PR adds the `enableShallowPropDiffing` feature flag to support this
experiment.
## How did you test this change?
With `enableShallowPropDiffing` hardcoded to `true`:
```
yarn test packages/react-native-renderer
```
This fails on the following test cases:
- should use the diff attribute
- should do deep diffs of Objects by default
- should skip deeply-nested changed functions
Which makes sense with this change. These test cases should be deleted
if the experiment is shipped.
`disableDOMTestUtils` and the FB build `ReactTestUtilsFB` allowed us to
finish migrating internal callsites off of ReactTestUtils. Now that
usage is cleaned up, we can remove the flag, build artifact, and test
coverage for the deprecated utility methods.
## Summary
The experiment has shown no significant performance changes. This PR
removes it.
## How did you test this change?
```
yarn flow native
yarn lint
```
This is the first step to experimenting with a new type of stack traces
behind the `enableOwnerStacks` flag - in DEV only.
The idea is to generate stacks that are more like if the JSX was a
direct call even though it's actually a lazy call. Not only can you see
which exact JSX call line number generated the erroring component but if
that's inside an abstraction function, which function called that
function and if it's a component, which component generated that
component. For this to make sense it really need to be the "owner" stack
rather than the parent stack like we do for other component stacks. On
one hand it has more precise information but on the other hand it also
loses context. For most types of problems the owner stack is the most
useful though since it tells you which component rendered this
component.
The problem with the platform in its current state is that there's two
ways to deal with stacks:
1) `new Error().stack`
2) `console.createTask()`
The nice thing about `new Error().stack` is that we can extract the
frames and piece them together in whatever way we want. That is great
for constructing custom UIs like error dialogs. Unfortunately, we can't
take custom stacks and set them in the native UIs like Chrome DevTools.
The nice thing about `console.createTask()` is that the resulting stacks
are natively integrated into the Chrome DevTools in the console and the
breakpoint debugger. They also automatically follow source mapping and
ignoreLists. The downside is that there's no way to extract the async
stack outside the native UI itself so this information cannot be used
for custom UIs like errors dialogs. It also means we can't collect this
on the server and then pass it to the client for server components.
The solution here is that we use both techniques and collect both an
`Error` object and a `Task` object for every JSX call.
The main concern about this approach is the performance so that's the
main thing to test. It's certainly too slow for production but it might
also be too slow even for DEV.
This first PR doesn't actually use the stacks yet. It just collects them
as the first step. The next step is to start utilizing this information
in error printing etc.
For RSC we pass the stack along across over the wire. This can be
concatenated on the client following the owner path to create an owner
stack leading back into the server. We'll later use this information to
restore fake frames on the client for native integration. Since this
information quickly gets pretty heavy if we include all frames, we strip
out the top frame. We also strip out everything below the functions that
call into user space in the Flight runtime. To do this we need to figure
out the frames that represents calling out into user space. The
resulting stack is typically just the one frame inside the owner
component's JSX callsite. I also eagerly strip out things we expect to
be ignoreList:ed anyway - such as `node_modules` and Node.js internals.
Following #28768, add a path to testing Fast JSX on www.
We want to measure the impact of Fast JSX and enable a path to testing
before string refs are completely removed in www (which is a work in
progress).
Without `disableStringRefs`, we need to copy any object with a `ref` key
so we can pass it through `coerceStringRef()` and copy it into the
object. This de-opt path is what is gated behind
`enableFastJSXWithStringRefs`.
The additional checks should have no perf impact in OSS as the flags
remain true there and the build output is not changed. For www, I've
benchmarked the addition of the boolean checks with values cached at
module scope. There is no significant change observed from our
benchmarks and any latency will apply to test and control branches
evenly. This added experiment complexity is temporary. We should be able
to clean it up, along with the flag checks for `enableRefAsProp` and
`disableStringRefs` shortly.
