* Store the start time on `updateQueue` instead of `stateNode`
Originally I did this to free the `stateNode` field to store a second
set of children. I don't we'll need this anymore, since we use fragment
fibers instead. But I still think using `updateQueue` makes more sense
so I'll leave this in.
* Use fragment fibers to keep the primary and fallback children separate
If the children timeout, we switch to showing the fallback children in
place of the "primary" children. However, we don't want to delete the
primary children because then their state will be lost (both the React
state and the host state, e.g. uncontrolled form inputs). Instead we
keep them mounted and hide them. Both the fallback children AND the
primary children are rendered at the same time. Once the primary
children are un-suspended, we can delete the fallback children — don't
need to preserve their state.
The two sets of children are siblings in the host environment, but
semantically, for purposes of reconciliation, they are two separate
sets. So we store them using two fragment fibers.
However, we want to avoid allocating extra fibers for every placeholder.
They're only necessary when the children time out, because that's the
only time when both sets are mounted.
So, the extra fragment fibers are only used if the children time out.
Otherwise, we render the primary children directly. This requires some
custom reconciliation logic to preserve the state of the primary
children. It's essentially a very basic form of re-parenting.
* Use `memoizedState` to store various pieces of SuspenseComponent's state
SuspenseComponent has three pieces of state:
- alreadyCaptured: Whether a component in the child subtree already
suspended. If true, subsequent suspends should bubble up to the
next boundary.
- didTimeout: Whether the boundary renders the primary or fallback
children. This is separate from `alreadyCaptured` because outside of
strict mode, when a boundary times out, the first commit renders the
primary children in an incomplete state, then performs a second commit
to switch the fallback. In that first commit, `alreadyCaptured` is
false and `didTimeout` is true.
- timedOutAt: The time at which the boundary timed out. This is separate
from `didTimeout` because it's not set unless the boundary
actually commits.
These were previously spread across several fields.
This happens to make the non-strict case a bit less hacky; the logic for
that special case is now mostly localized to the UnwindWork module.
* Hide timed-out Suspense children
When a subtree takes too long to load, we swap its contents out for
a fallback to unblock the rest of the tree. Because we don't want
to lose the state of the timed out view, we shouldn't actually delete
the nodes from the tree. Instead, we'll keep them mounted and hide
them visually. When the subtree is unblocked, we un-hide it, having
preserved the existing state.
Adds additional host config methods. For mutation mode:
- hideInstance
- hideTextInstance
- unhideInstance
- unhideTextInstance
For persistent mode:
- cloneHiddenInstance
- cloneUnhiddenInstance
- createHiddenTextInstance
I've only implemented the new methods in the noop and test renderers.
I'll implement them in the other renderers in subsequent commits.
* Include `hidden` prop in noop renderer's output
This will be used in subsequent commits to test that timed-out children
are properly hidden.
Also adds getChildrenAsJSX() method as an alternative to using
getChildren(). (Ideally all our tests would use test renderer #oneday.)
* Implement hide/unhide host config methods for DOM renderer
For DOM nodes, we hide using `el.style.display = 'none'`.
Text nodes don't have style, so we hide using `text.textContent = ''`.
* Implement hide/unhide host config methods for Art renderer
* Create DOM fixture that tests state preservation of timed out content
* Account for class components that suspend outside concurrent mode
Need to distinguish mount from update. An unfortunate edge case :(
* Fork appendAllChildren between persistent and mutation mode
* Remove redundant check for existence of el.style
* Schedule placement effect on indeterminate components
In non-concurrent mode, indeterminate fibers may commit in an
inconsistent state. But when they update, we should throw out the
old fiber and start fresh. Which means the new fiber needs a
placement effect.
* Pass null instead of current everywhere in mountIndeterminateComponent
* Deprecate findDOMNode in StrictMode
There are two scenarios. One is that we pass a component instance that is
already in strict mode or the node that we find is in strict mode if
an outer component renders into strict mode.
I use a separate method findHostInstanceWithWarning for this so that
a) I can pass the method name (findDOMNode/findNodeHandle).
b) Can ignore this warning in React Native mixins/NativeComponent that use this helper.
I don't want to expose the fiber to the renderers themselves.
* Add regression test for persistent bailout bug
* Fork more logic into updateHostComponent
This is mostly copy paste. But I added a bailout only to mutation mode. Persistent mode doesn't have that props equality bailout anymore, so the Fabric test now passes.
* Add failing test for persistence host minimalism
* Add bailouts to the persistent host updates
* Merged interaction-tracking package into react-scheduler
* Add tracking API to FB+www builds
* Added Rollup plugin to strip no-side-effect imports from Rollup bundles
* Re-bundle tracking and scheduling APIs on SECRET_INTERNALS object for UMD build (and provide lazy forwarding methods)
* Added some additional tests and fixtures
* Fixed broken UMD fixture in master (#13512)
* Replace some namespace imports
* Simplify the controlled component injection
* Simplify the batching injection
* Simplify the component tree injection
* Use %s in the console calls
* Add shared/warningWithStack
* Convert some warning callsites to warningWithStack
* Use warningInStack in shared utilities and remove unnecessary checks
* Replace more warning() calls with warningWithStack()
* Fixes after rebase + use warningWithStack in react
* Make warning have stack by default; warningWithoutStack opts out
* Forbid builds that may not use internals
* Revert newly added stacks
I changed my mind and want to keep this PR without functional changes. So we won't "fix" any warnings that are already missing stacks. We'll do it in follow-ups instead.
* Fix silly find/replace mistake
* Reorder imports
* Add protection against warning argument count mismatches
* Address review
* Fix getComponentName() for types with nested $$typeof
* Temporarily remove Profiler ID from messages
* Change getComponentName() signature to take just type
It doesn't actually need the whole Fiber.
* Remove getComponentName() forks in isomorphic and SSR
* Remove unnecessary .type access where we already have a type
* Remove unused type
* Refactor ReactDebugCurrentFiber to use named exports
This makes the difference between it and ReactFiberCurrentFrame a bit clearer.
ReactDebugCurrentFiber is Fiber's own implementation.
ReactFiberCurrentFrame is the thing that holds a reference to the current implementation and delegates to it.
* Unify ReactFiberComponentTreeHook and ReactDebugCurrentFiber
Conceptually they're very related.
ReactFiberComponentTreeHook contains implementation details of reading Fiber's stack (both in DEV and PROD).
ReactDebugCurrentFiber contained a reference to the current fiber, and used the above utility.
It was confusing when to use which one. Colocating them makes it clearer what you could do with each method.
In the future, the plan is to stop using these methods explicitly in most places, and instead delegate to a warning system that includes stacks automatically. This change makes future refactorings simpler by colocating related logic.
* Rename methods to better reflect their meanings
Clarify which are DEV or PROD-only.
Clarify which can return null.
I believe the "work in progress only" was a mistake. I introduced it because I wasn't sure what guarantees we have around .return. But we know for sure that following a .return chain gives us an accurate stack even if we get into WIP trees because we don't have reparenting. So it's fine to relax that naming.
* Rename ReactDebugCurrentFiber -> ReactCurrentFiber
It's not completely DEV-only anymore.
Individual methods already specify whether they work in DEV or PROD in their names.
* Prepare placeholders before timing out
While a tree is suspended, prepare for the timeout by pre-rendering the
placeholder state.
This simplifies the implementation a bit because every render now
results in a completed tree.
* Suspend inside an already timed out Placeholder
A component should be able to suspend inside an already timed out
placeholder. The time at which the placeholder committed is used as
the start time for a subsequent suspend.
So, if a placeholder times out after 3 seconds, and an inner
placeholder has a threshold of 2 seconds, the inner placeholder will
not time out until 5 seconds total have elapsed.
* Inline fbjs/lib/emptyObject
* Explicit naming
* Compare to undefined
* Another approach for detecting whether we can mutate
Each renderer would have its own local LegacyRefsObject function.
While in general we don't want `instanceof`, here it lets us do a simple check: did *we* create the refs object?
Then we can mutate it.
If the check didn't pass, either we're attaching ref for the first time (so we know to use the constructor),
or (unlikely) we're attaching a ref to a component owned by another renderer. In this case, to avoid "losing"
refs, we assign them onto the new object. Even in that case it shouldn't "hop" between renderers anymore.
* Clearer naming
* Add test case for strings refs across renderers
* Use a shared empty object for refs by reading it from React
* Remove string refs from ReactART test
It's not currently possible to resetModules() between several renderers
without also resetting the `React` module. However, that leads to losing
the referential identity of the empty ref object, and thus subsequent
checks in the renderers for whether it is pooled fail (and cause assignments
to a frozen object).
This has always been the case, but we used to work around it by shimming
fbjs/lib/emptyObject in tests and preserving its referential identity.
This won't work anymore because we've inlined it. And preserving referential
identity of React itself wouldn't be great because it could be confusing during
testing (although we might want to revisit this in the future by moving its
stateful parts into a separate package).
For now, I'm removing string ref usage from this test because only this is
the only place in our tests where we hit this problem, and it's only
related to string refs, and not just ref mechanism in general.
* Simplify the condition
We need a different "component tree" thingy for Fabric.
A lot of this doesn't really make much sense in a persistent world but
currently we can't dispatch events to memoizedProps on a Fiber since
they're pooled. Also, it's unclear what the semantics should be when we
dispatch an event that happened when the old props were in effect but now
we have new props already.
This implementation tries to use the last committed props but also fails
at that because we don't have a commit hook in the persistent mode.
However, at least it doesn't crash when dispatching. :)
* Extract base Jest config
This makes it easier to change the source config without affecting the build test config.
* Statically import the host config
This changes react-reconciler to import HostConfig instead of getting it through a function argument.
Rather than start with packages like ReactDOM that want to inline it, I started with React Noop and ensured that *custom* renderers using react-reconciler package still work. To do this, I'm making HostConfig module in the reconciler look at a global variable by default (which, in case of the react-reconciler npm package, ends up being the host config argument in the top-level scope).
This is still very broken.
* Add scaffolding for importing an inlined renderer
* Fix the build
* ES exports for renderer methods
* ES modules for host configs
* Remove closures from the reconciler
* Check each renderer's config with Flow
* Fix uncovered Flow issue
We know nextHydratableInstance doesn't get mutated inside this function, but Flow doesn't so it thinks it may be null.
Help Flow.
* Prettier
* Get rid of enable*Reconciler flags
They are not as useful anymore because for almost all cases (except third party renderers) we *know* whether it supports mutation or persistence.
This refactoring means react-reconciler and react-reconciler/persistent third-party packages now ship the same thing.
Not ideal, but this seems worth how simpler the code becomes. We can later look into addressing it by having a single toggle instead.
* Prettier again
* Fix Flow config creation issue
* Fix imprecise Flow typing
* Revert accidental changes
* Add TopLevelEventTypes
* Fix `ReactBrowserEventEmitter`
* Fix EventPluginUtils
* Fix TapEventPlugin
* Fix ResponderEventPlugin
* Update ReactDOMFiberComponent
* Fix BeforeInputEventPlugin
* Fix ChangeEventPlugin
* Fix EnterLeaveEventPlugin
* Add missing non top event type used in ChangeEventPlugin
* Fix SelectEventPlugin
* Fix SimpleEventPlugin
* Fix outstanding Flow issues and move TopLevelEventTypes
* Inline a list of all events in `ReactTestUtils`
* Fix tests
* Make it pretty
* Fix completly unrelated typo
* Don’t use map constructor because of IE11
* Update typings, revert changes to native code
* Make topLevelTypes in ResponderEventPlugin injectable and create DOM and ReactNative variant
* Set proper dependencies for DOMResponderEventPlugin
* Prettify
* Make some react dom tests no longer depend on internal API
* Use factories to create top level speific generic event modules
* Remove unused dependency
* Revert exposed module renaming, hide store creation, and inline dependency decleration
* Add Flow types to createResponderEventPlugin and its consumers
* Remove unused dependency
* Use opaque flow type for TopLevelType
* Add missing semis
* Use raw event names as top level identifer
* Upgrade baylon
This is required for parsing opaque flow types in our CI tests.
* Clean up flow types
* Revert Map changes of ReactBrowserEventEmitter
* Upgrade babel-* packages
Apparently local unit tests also have issues with parsing JavaScript
modules that contain opaque types (not sure why I didn't notice
earlier!?).
* Revert Map changes of SimpleEventPlugin
* Clean up ReactTestUtils
* Add missing semi
* Fix Flow issue
* Make TopLevelType clearer
* Favor for loops
* Explain the new DOMTopLevelEventTypes concept
* Use static injection for Responder plugin types
* Remove null check and rely on flow checks
* Add missing ResponderEventPlugin dependencies
* Support concurrent primary and secondary renderers.
As a workaround to support multiple concurrent renderers, we categorize
some renderers as primary and others as secondary. We only expect
there to be two concurrent renderers at most: React Native (primary) and
Fabric (secondary); React DOM (primary) and React ART (secondary).
Secondary renderers store their context values on separate fields.
* Add back concurrent renderer warning
Only warn for two concurrent primary or two concurrent secondary renderers.
* Change "_secondary" suffix to "2"
#EveryBitCounts
* Added new "native-fb" and "native-fabric-fb" bundles.
* Split RN_DEV and RN_PROD bundle types into RN_OSS_DEV, RN_OSS_PROD, RN_FB_DEV, and RN_FB_PROD. (This is a bit redundant but it seemed the least intrusive way of supporting a forked feature flags file for these bundles.)
* Renamed FB_DEV and FB_PROD bundle types to be more explicitly for www (FB_WWW_DEV and FB_WWW_PROD)
* Removed Haste @providesModule headers from the RB-specific RN renderer bundles to avoid a duplicate name conflicts.
* Remove dynamic values from OSS RN feature flags. (Leave them in FB RN feature flags.)
* Updated the sync script(s) to account for new renderer type.
* Move ReactFeatureFlags.js shim to FB bundle only (since OSS bundle no longer needs dynamic values).
