* Transform invariant to custom error type
This transforms calls to the invariant module:
```js
invariant(condition, 'A %s message that contains %s', adj, noun);
```
Into throw statements:
```js
if (!condition) {
if (__DEV__) {
throw ReactError(`A ${adj} message that contains ${noun}`);
} else {
throw ReactErrorProd(ERR_CODE, adj, noun);
}
}
```
The only thing ReactError does is return an error whose name is set
to "Invariant Violation" to match the existing behavior.
ReactErrorProd is a special version used in production that throws
a minified error code, with a link to see to expanded form. This
replaces the reactProdInvariant module.
As a next step, I would like to replace our use of the invariant module
for user facing errors by transforming normal Error constructors to
ReactError and ReactErrorProd. (We can continue using invariant for
internal React errors that are meant to be unreachable, which was the
original purpose of invariant.)
* Use numbers instead of strings for error codes
* Use arguments instead of an array
I wasn't sure about this part so I asked Sebastian, and his rationale
was that using arguments will make ReactErrorProd slightly slower, but
using an array will likely make all the functions that throw slightly
slower to compile, so it's hard to say which way is better. But since
ReactErrorProd is in an error path, and fewer bytes is generally better,
no array is good.
* Casing nit
* Add new mock build of Scheduler with flush, yield API
Test environments need a way to take control of the Scheduler queue and
incrementally flush work. Our current tests accomplish this either using
dynamic injection, or by using Jest's fake timers feature. Both of these
options are fragile and rely too much on implementation details.
In this new approach, we have a separate build of Scheduler that is
specifically designed for test environments. We mock the default
implementation like we would any other module; in our case, via Jest.
This special build has methods like `flushAll` and `yieldValue` that
control when work is flushed. These methods are based on equivalent
methods we've been using to write incremental React tests. Eventually
we may want to migrate the React tests to interact with the mock
Scheduler directly, instead of going through the host config like we
currently do.
For now, I'm using our custom static injection infrastructure to create
the two builds of Scheduler — a default build for DOM (which falls back
to a naive timer based implementation), and the new mock build. I did it
this way because it allows me to share most of the implementation, which
isn't specific to a host environment — e.g. everything related to the
priority queue. It may be better to duplicate the shared code instead,
especially considering that future environments (like React Native) may
have entirely forked implementations. I'd prefer to wait until the
implementation stabilizes before worrying about that, but I'm open to
changing this now if we decide it's important enough.
* Mock Scheduler in bundle tests, too
* Remove special case by making regex more restrictive
* Refactor Schedule, remove React-isms
Once the API stabilizes, we will move Schedule this into a separate
repo. To promote adoption, especially by projects outside the React
ecosystem, we'll remove all React-isms from the source and keep it as
simple as possible:
- No build step.
- No static types.
- Everything is in a single file.
If we end up needing to support multiple targets, like CommonJS and ESM,
we can still avoid a build step by maintaining two copies of the same
file, but with different exports.
This commit also refactors the implementation to split out the DOM-
specific parts (essentially a requestIdleCallback polyfill). Aside from
the architectural benefits, this also makes it possible to write host-
agnostic tests. If/when we publish a version of Schedule that targets
other environments, like React Native, we can run these same tests
across all implementations.
* Edits in response to Dan's PR feedback
* Remove rAF fork
**what is the change?:**
Undid https://github.com/facebook/react/pull/12837
**why make this change?:**
We originally forked rAF because we needed to pull in a particular
version of rAF internally at Facebook, to avoid grabbing the default
polyfilled version.
The longer term solution, until we can get rid of the global polyfill
behavior, is to initialize 'schedule' before the polyfilling happens.
Now that we have landed and synced
https://github.com/facebook/react/pull/12900 successfully, we can
initialize 'schedule' before the polyfill runs.
So we can remove the rAF fork. Here is how it will work:
1. Land this PR on Github.
2. Flarnie will quickly run a sync getting this change into www.
3. We delete the internal forked version of
'requestAnimationFrameForReact'.
4. We require 'schedule' in the polyfill file itself, before the
polyfilling happens.
**test plan:**
Flarnie will manually try the above steps locally and verify that things
work.
**issue:**
Internal task T29442940
* fix nits
* fix tests, fix changes from rebasing
* fix lint
* Migrated several additional tests to use new .toWarnDev() matcher
* Migrated ReactDOMComponent-test to use .toWarnDev() matcher
Note this test previous had some hacky logic to verify errors were reported against unique line numbers. Since the new matcher doesn't suppor this, I replaced this check with an equivalent (I think) comparison of unique DOM elements (eg div -> span)
* Updated several additional tests to use the new .toWarnDev() matcher
* Updated many more tests to use .toWarnDev()
* Updated several additional tests to use .toWarnDev() matcher
* Updated ReactElementValidator to distinguish between Array and Object in its warning. Also updated its test to use .toWarnDev() matcher.
* Updated a couple of additional tests
* Removed unused normalizeCodeLocInfo() methods
* Use `this` inside invokeGuardedCallback
It's slightly odd but that's exactly how our www fork works.
Might as well do it in the open source version to make it clear we rely on context here.
* Move invokeGuardedCallback into a separate file
This lets us introduce forks for it.
* Add a www fork for invokeGuardedCallback
* Fix Flow
* Extract Jest config into a separate file
* Refactor Jest scripts directory structure
Introduces a more consistent naming scheme.
* Add yarn test-bundles and yarn test-prod-bundles
Only files ending with -test.public.js are opted in (so far we don't have any).
* Fix error decoding for production bundles
GCC seems to remove `new` from `new Error()` which broke our proxy.
* Build production version of react-noop-renderer
This lets us test more bundles.
* Switch to blacklist (exclude .private.js tests)
* Rename tests that are currently broken against bundles to *-test.internal.js
Some of these are using private APIs. Some have other issues.
* Add bundle tests to CI
* Split private and public ReactJSXElementValidator tests
* Remove internal deps from ReactServerRendering-test and make it public
* Only run tests directly in __tests__
This lets us share code between test files by placing them in __tests__/utils.
* Remove ExecutionEnvironment dependency from DOMServerIntegrationTest
It's not necessary since Stack.
* Split up ReactDOMServerIntegration into test suite and utilities
This enables us to further split it down. Good both for parallelization and extracting public parts.
* Split Fragment tests from other DOMServerIntegration tests
This enables them to opt other DOMServerIntegration tests into bundle testing.
* Split ReactDOMServerIntegration into different test files
It was way too slow to run all these in sequence.
* Don't reset the cache twice in DOMServerIntegration tests
We used to do this to simulate testing separate bundles.
But now we actually *do* test bundles. So there is no need for this, as it makes tests slower.
* Rename test-bundles* commands to test-build*
Also add test-prod-build as alias for test-build-prod because I keep messing them up.
* Use regenerator polyfill for react-noop
This fixes other issues and finally lets us run ReactNoop tests against a prod bundle.
* Run most Incremental tests against bundles
Now that GCC generator issue is fixed, we can do this.
I split ErrorLogging test separately because it does mocking. Other error handling tests don't need it.
* Update sizes
* Fix ReactMount test
* Enable ReactDOMComponent test
* Fix a warning issue uncovered by flat bundle testing
With flat bundles, we couldn't produce a good warning for <div onclick={}> on SSR
because it doesn't use the event system. However the issue was not visible in normal
Jest runs because the event plugins have been injected by the time the test ran.
To solve this, I am explicitly passing whether event system is available as an argument
to the hook. This makes the behavior consistent between source and bundle tests. Then
I change the tests to document the actual logic and _attempt_ to show a nice message
(e.g. we know for sure `onclick` is a bad event but we don't know the right name for it
on the server so we just say a generic message about camelCase naming convention).
* Move Jest setup files to /dev/ subdirectory
* Clone Jest /dev/ files into /prod/
* Move shared code into scripts/jest
* Move Jest config into the scripts folder
* Fix the equivalence test
It fails because the config is now passed to Jest explicitly.
But the test doesn't know about the config.
To fix this, we just run it via `yarn test` (which includes the config).
We already depend on Yarn for development anyway.
* Add yarn test-prod to run Jest with production environment
* Actually flip the production tests to run in prod environment
This produces a bunch of errors:
Test Suites: 64 failed, 58 passed, 122 total
Tests: 740 failed, 26 skipped, 1809 passed, 2575 total
Snapshots: 16 failed, 4 passed, 20 total
* Ignore expectDev() calls in production
Down from 740 to 175 failed.
Test Suites: 44 failed, 78 passed, 122 total
Tests: 175 failed, 26 skipped, 2374 passed, 2575 total
Snapshots: 16 failed, 4 passed, 20 total
* Decode errors so tests can assert on their messages
Down from 175 to 129.
Test Suites: 33 failed, 89 passed, 122 total
Tests: 129 failed, 1029 skipped, 1417 passed, 2575 total
Snapshots: 16 failed, 4 passed, 20 total
* Remove ReactDOMProduction-test
There is no need for it now. The only test that was special is moved into ReactDOM-test.
* Remove production switches from ReactErrorUtils
The tests now run in production in a separate pass.
* Add and use spyOnDev() for warnings
This ensures that by default we expect no warnings in production bundles.
If the warning *is* expected, use the regular spyOn() method.
This currently breaks all expectDev() assertions without __DEV__ blocks so we go back to:
Test Suites: 56 failed, 65 passed, 121 total
Tests: 379 failed, 1029 skipped, 1148 passed, 2556 total
Snapshots: 16 failed, 4 passed, 20 total
* Replace expectDev() with expect() in __DEV__ blocks
We started using spyOnDev() for console warnings to ensure we don't *expect* them to occur in production. As a consequence, expectDev() assertions on console.error.calls fail because console.error.calls doesn't exist. This is actually good because it would help catch accidental warnings in production.
To solve this, we are getting rid of expectDev() altogether, and instead introduce explicit expectation branches. We'd need them anyway for testing intentional behavior differences.
This commit replaces all expectDev() calls with expect() calls in __DEV__ blocks. It also removes a few unnecessary expect() checks that no warnings were produced (by also removing the corresponding spyOnDev() calls).
Some DEV-only assertions used plain expect(). Those were also moved into __DEV__ blocks.
ReactFiberErrorLogger was special because it console.error()'s in production too. So in that case I intentionally used spyOn() instead of spyOnDev(), and added extra assertions.
This gets us down to:
Test Suites: 21 failed, 100 passed, 121 total
Tests: 72 failed, 26 skipped, 2458 passed, 2556 total
Snapshots: 16 failed, 4 passed, 20 total
* Enable User Timing API for production testing
We could've disabled it, but seems like a good idea to test since we use it at FB.
* Test for explicit Object.freeze() differences between PROD and DEV
This is one of the few places where DEV and PROD behavior differs for performance reasons.
Now we explicitly test both branches.
* Run Jest via "yarn test" on CI
* Remove unused variable
* Assert different error messages
* Fix error handling tests
This logic is really complicated because of the global ReactFiberErrorLogger mock.
I understand it now, so I added TODOs for later.
It can be much simpler if we change the rest of the tests that assert uncaught errors to also assert they are logged as warnings.
Which mirrors what happens in practice anyway.
* Fix more assertions
* Change tests to document the DEV/PROD difference for state invariant
It is very likely unintentional but I don't want to change behavior in this PR.
Filed a follow up as https://github.com/facebook/react/issues/11618.
* Remove unnecessary split between DEV/PROD ref tests
* Fix more test message assertions
* Make validateDOMNesting tests DEV-only
* Fix error message assertions
* Document existing DEV/PROD message difference (possible bug)
* Change mocking assertions to be DEV-only
* Fix the error code test
* Fix more error message assertions
* Fix the last failing test due to known issue
* Run production tests on CI
* Unify configuration
* Fix coverage script
* Remove expectDev from eslintrc
* Run everything in band
We used to before, too. I just forgot to add the arguments after deleting the script.
* Update transforms to handle ES modules
* Update Jest to handle ES modules
* Convert react package to ES modules
* Convert react-art package to ES Modules
* Convert react-call-return package to ES Modules
* Convert react-test-renderer package to ES Modules
* Convert react-cs-renderer package to ES Modules
* Convert react-rt-renderer package to ES Modules
* Convert react-noop-renderer package to ES Modules
* Convert react-dom/server to ES modules
* Convert react-dom/{client,events,test-utils} to ES modules
* Convert react-dom/shared to ES modules
* Convert react-native-renderer to ES modules
* Convert react-reconciler to ES modules
* Convert events to ES modules
* Convert shared to ES modules
* Remove CommonJS support from transforms
* Move ReactDOMFB entry point code into react-dom/src
This is clearer because we can use ES imports in it.
* Fix Rollup shim configuration to work with ESM
* Fix incorrect comment
* Exclude external imports without side effects
* Fix ReactDOM FB build
* Remove TODOs I don’t intend to fix yet
* Use relative paths in packages/react
* Use relative paths in packages/react-art
* Use relative paths in packages/react-cs
* Use relative paths in other packages
* Fix as many issues as I can
This uncovered an interesting problem where ./b from package/src/a would resolve to a different instantiation of package/src/b in Jest.
Either this is a showstopper or we can solve it by completely fobbidding remaining /src/.
* Fix all tests
It seems we can't use relative requires in tests anymore. Otherwise Jest becomes confused between real file and symlink.
https://github.com/facebook/jest/issues/3830
This seems bad... Except that we already *don't* want people to create tests that import individual source files.
All existing cases of us doing so are actually TODOs waiting to be fixed.
So perhaps this requirement isn't too bad because it makes bad code looks bad.
Of course, if we go with this, we'll have to lint against relative requires in tests.
It also makes moving things more painful.
* Prettier
* Remove @providesModule
* Fix remaining Haste imports I missed earlier
* Fix up paths to reflect new flat structure
* Fix Flow
* Fix CJS and UMD builds
* Fix FB bundles
* Fix RN bundles
* Prettier
* Fix lint
* Fix warning printing and error codes
* Fix buggy return
* Fix lint and Flow
* Use Yarn on CI
* Unbreak Jest
* Fix lint
* Fix aliased originals getting included in DEV
Shouldn't affect correctness (they were ignored) but fixes DEV size regression.
* Record sizes
* Fix weird version in package.json
* Tweak bundle labels
* Get rid of output option by introducing react-dom/server.node
* Reconciler should depend on prop-types
* Update sizes last time
* shared/src -> shared
It's not a real package and doesn't even have package.json.
This will also make importing less weird if we drop Haste.
* Get rid of shared/utils
Moved event-specific into shared/event.
Moved rest to the root since distinction has always been pretty arbitrary.
* Fix references to old shared/src paths
