* Add Event Replaying Infra
* Wire up Roots and Suspense boundaries, to retry events, after they commit
* Replay discrete events in order in a separate scheduler callback
* Add continuous events
These events only replay their last target if the target is not yet
hydrated. That way we don't have to wait for a previously hovered
boundary before invoking the current target.
* Enable tests from before
These tests were written with replaying in mind and now we can properly
enable them.
* Unify replaying and dispatching
* Mark system flags as a replay and pass to legacy events
That way we can check if this is a replay and therefore needs a special
case. One such special case is "mouseover" where we check the
relatedTarget.
* Eagerly listen to all replayable events
To minimize breakages in a minor, I only do this for the new root APIs
since replaying only matters there anyway. Only if hydrating.
For Flare, I have to attach all active listeners since the current
system has one DOM listener for each. In a follow up I plan on optimizing
that by only attaching one if there's at least one active listener
which would allow us to start with only passive and then upgrade.
* Desperate attempt to save bytese
* Add test for mouseover replaying
We need to check if the "relatedTarget" is mounted due to how the old
event system dispatches from the "out" event.
* Fix for nested boundaries and suspense in root container
This is a follow up to #16673 which didn't have a test because it wasn't
observable yet. This shows that it had a bug.
* Rename RESPONDER_EVENT_SYSTEM to PLUGIN_EVENT_SYSTEM
Real Maps should now be used in RN JS engines. In theory this should
be faster (but might not actually be in practice), and it avoids hitting
upper bounds of property max counts.
We don't use these types of Maps in Fabric.
* allow nested `act()`s from different renderers
There are usecases where multiple renderers need to oprate inside an act() scope
- ReactDOM.render being used inside another component tree. The parent component will be rendered using ReactTestRenderer.create for a snapshot test or something.
- a ReactDOM instance interacting with a ReactTestRenderer instance (like for the new devtools)
This PR changes the way the acting sigils operate to allow for this. It keeps 2 booleans, one attached to React, one attached to the renderer. act() changes these values, and the workloop reads them to decide what warning to trigger.
I also renamed shouldWarnUnactedUpdates to warnsIfNotActing
* s/ReactIsActing/IsSomeRendererActing and s/ReactRendererIsActing/IsThisRendererActing
* use toWarnDev for dom fixture tests
forks toWarnDev from root into fixture/dom, updates tes tests to use it
* disable act() warnings for react-art()
- For 'secondary' renderers like react-act, we don't want to fire missing act() warnings; the wrapping renderer will fire warnings anyway, and when it flushes, it flushes effects *across* renderers.
- I could have used isPrimaryRenderer as the flag, but this is marked as false for react-test-renderer, and we *do* want the warning to fire for it. Hence a new flag.
* add missing dependency `art` to fixtures/dom
* Lint rule for unminified errors
Add a lint rule that fails if an invariant message is not part of the
error code map.
The goal is to be more disciplined about adding and modifiying
production error codes. Error codes should be consistent across releases
even if their wording changes, for continuity in logs.
Currently, error codes are added to the error code map via an automated
script that runs right before release. The problem with this approach is
that if someone modifies an error message in the source, but neglects to
modify the corresponding message in the error code map, then the message
will be assigned a new error code, instead of reusing the existing one.
Because the error extraction script only runs before a release, people
rarely modify the error code map in practice. By moving the extraction
step to the PR stage, it forces the author to consider whether the
message should be assigned a new error code. It also allows the reviewer
to review the changes.
The trade off is that it requires more effort and context to land new
error messages, or to modify existing ones, particular for new
contributors who are not familiar with our processes.
Since we already expect users to lint their code, I would argue the
additional burden is marginal. Even if they forget to run the lint
command locally, they will get quick feedback from the CI lint job,
which typically finishes within 2-3 minutes.
* Add unreleased error messages to map
* [react-native] Use path-based imports instead of Haste for the RN renderer
To move React Native to standard path-based imports instead of Haste, the RN renderer that is generated from the code in this repo needs to use path-based imports as well since the generated code is vendored by RN. This commit makes it so the interface between the generated renderers and RN does not rely on Haste and instead uses a private interface explicitly defined by RN. This inverts control of the abstraction so that RN decides the internals to export rather than React deciding what to import.
On RN's side, a new module named `react-native/Libraries/ReactPrivate/ReactNativePrivateInterface` explicitly exports the modules used by the renderers in this repo. (There is also a private module for InitializeCore so that we can import it just for the side effects.) On React's side, the various renderer modules access RN internals through the explicit private interface.
The Rollup configuration becomes slimmer since the only external package is now `react-native`, and the individual modules are instead listed out in `ReactNativePrivateInterface`.
Task description: https://github.com/facebook/react-native/issues/24770
Sister RN PR (needs to land before this one): https://github.com/facebook/react-native/pull/24782
Test Plan: Ran unit tests and Flow in this repo. Generated the renderers and manually copied them over to the RN repo. Ran the RN tests and launched the RNTester app.
* Access natively defined "nativeFabricUIManager" instead of importing it
Some places in the Fabric renderers access `nativeFabricUIManager` (a natively defined global) instead of importing UIManager. While this is coupling across repos that depends on the timing of events, it is necessary until we have a way to defer top-level imports to run after `nativeFabricUIManager` is defined. So for consistency we use `nativeFabricUIManager` everywhere (see the comment in https://github.com/facebook/react/pull/15604#pullrequestreview-236842223 for more context).
* Add Batched Mode
React has an unfortunate quirk where updates are sometimes synchronous
-- where React starts rendering immediately within the call stack of
`setState` — and sometimes batched, where updates are flushed at the
end of the current event. Any update that originates within the call
stack of the React event system is batched. This encompasses most
updates, since most updates originate from an event handler like
`onClick` or `onChange`. It also includes updates triggered by lifecycle
methods or effects. But there are also updates that originate outside
React's event system, like timer events, network events, and microtasks
(promise resolution handlers). These are not batched, which results in
both worse performance (multiple render passes instead of single one)
and confusing semantics.
Ideally all updates would be batched by default. Unfortunately, it's
easy for components to accidentally rely on this behavior, so changing
it could break existing apps in subtle ways.
One way to move to a batched-by-default model is to opt into Concurrent
Mode (still experimental). But Concurrent Mode introduces additional
semantic changes that apps may not be ready to adopt.
This commit introduces an additional mode called Batched Mode. Batched
Mode enables a batched-by-default model that defers all updates to the
next React event. Once it begins rendering, React will not yield to
the browser until the entire render is finished.
Batched Mode is superset of Strict Mode. It fires all the same warnings.
It also drops the forked Suspense behavior used by Legacy Mode, in favor
of the proper semantics used by Concurrent Mode.
I have not added any public APIs that expose the new mode yet. I'll do
that in subsequent commits.
* Suspense in Batched Mode
Should have same semantics as Concurrent Mode.
* Use RootTag field to configure type of root
There are three types of roots: Legacy, Batched, and Concurrent.
* flushSync should not flush batched work
Treat Sync and Batched expiration times separately. Only Sync updates
are pushed to our internal queue of synchronous callbacks.
Renamed `flushImmediateQueue` to `flushSyncCallbackQueue` for clarity.
* [React Native] Inline calls to FabricUIManager in shared code
* Call global.nativeFabricUIManager directly as short term fix
* Add flow types
* Add nativeFabricUIManager global to eslint config
* Adding eslint global to bundle validation script
* [React Native] Add tests to paper renderer for measure, measureLayout
* [React Native] measure calls will now call FabricUIManager
The Fabric renderer was previously calling the paper UIManager's measure calls and passing the react tag. This PR changes the renderer to now call FabricUIManager passing the node instead.
One of the parts of this that feels more controversial is making NativeMethodsMixin and ReactNative.NativeComponent warn when calling measureLayout in Fabric. As Seb and I decided in https://github.com/facebook/react/pull/15126, it doesn't make sense for a component created with one of these methods to require a native ref but not work the other way around. For example: a.measureLayout(b) might work but b.measureLayout(a) wouldn't. We figure we should keep these consistent and continue migrating things off of NativeMethodsMixin and NativeComponent.
If this becomes problematic for the Fabric rollout then we should revisit this.
* Fixing Flow
* Add FabricUIManager to externals for paper renderer
* import * as FabricUIManager from 'FabricUIManager';
* Update tests
* Shouldn't have removed UIManager import
* Update with the new tests
* ReactNative's ref.measureLayout now takes a ref
* Use Object as the additional param type
* Remove unnecessary whitespace
* Not supporting ref in mixin or subclass
* Add command to run tests in persistent mode
* Convert Suspense fuzz tester to use noop renderer
So we can run it in persistent mode, too.
* Don't mutate stateNode in appendAllChildren
We can't mutate the stateNode in appendAllChildren because the children
could be current.
This is a bit weird because now the child that we append is different
from the one on the fiber stateNode. I think this makes conceptual
sense, but I suspect this likely breaks an assumption in Fabric.
With this approach, we no longer need to clone to unhide the children,
so I removed those host config methods.
Fixes bug surfaced by fuzz tester. (The test case that failed was the
one that's already hard coded.)
* In persistent mode, disable test that reads a ref
Refs behave differently in persistent mode. I added a TODO to write
a persistent mode version of this test.
* Run persistent mode tests in CI
* test-persistent should skip files without noop
If a file doesn't reference react-noop-renderer, we shouldn't bother
running it in persistent mode, since the results will be identical to
the normal test run.
* Remove module constructor from placeholder tests
We don't need this now that we have the ability to run any test file in
either mutation or persistent mode.
* Revert "test-persistent should skip files without noop"
Seb objected to adding shelljs as a dep and I'm too lazy to worry about
Windows support so whatever I'll just revert this.
* Delete duplicate file
* Convert ReactSuspensePlaceholder tests to use noop
Instead of the test renderer, since test renderer does not support
running in persistent mode.
* Run Placeholder tests in persistent mode, too
* Fix Flow and lint
* Hidden text instances should have correct host context
Adds a test for a subtle edge case that only occurs in persistent mode.
* createHiddenTextInstance -> cloneHiddenTextInstance
This sidesteps the problem where createHiddenTextInstance needs access
to the host context.
