This PR enables all PIE rules on ruff, there are already some enabled rules from this family, the new added rules are
```
PIE796 Enum contains duplicate value: {value}
PIE808 Unnecessary start argument in range
```
Pull Request resolved: https://github.com/pytorch/pytorch/pull/165814
Approved by: https://github.com/ezyang
This PR enables all PIE rules on ruff, there are already some enabled rules from this family, the new added rules are
```
PIE796 Enum contains duplicate value: {value}
PIE808 Unnecessary start argument in range
```
Pull Request resolved: https://github.com/pytorch/pytorch/pull/165814
Approved by: https://github.com/ezyang
Fixes#141563
In NumPy, an ellipsis always acts as a separator between advanced indices, even when the ellipsis doesn't actually match any dimensions. In PyTorch an empty ellipsis doesn't cause a separation. This leads to differing behavior between Numpy and PyTorch in this edge case.
This difference in behavior leads to a bug when using torch.compile:
```python
>>> import numpy as np
>>> f = lambda x: x[:,(0,1),...,(0,1)].shape
>>> a = np.ones((3, 4, 5))
>>> f(a)
(2, 3)
>>> torch.compile(f)(a)
(3, 2)
```
Similarly to #157676, this PR doesn't change PyTorch's behavior, but it fixes the translation layer, ensuring torch._numpy compatibility with NumPy. I am marking this PR as fixing #141563, even though PyTorch behavior isn't modified.
Notice that there are still some other bugs in PyTorch's advanced indexing, that need to be fixed (mainly regarding proper accounting of dimensions when multidimensional boolean masks are present). But those need to be fixed at the ATen operator level. Examples:
- #71673
- #107699
- #158125
Pull Request resolved: https://github.com/pytorch/pytorch/pull/158297
Approved by: https://github.com/soumith
Written with Claude Code.
Fixes https://github.com/pytorch/pytorch/issues/157569
Fixes https://github.com/pytorch/pytorch/issues/158134
NumPy and PyTorch handle advanced indexing differently when advanced indices are separated by slices (e.g., arr[:, [0], :, 0]). PyTorch uses "outer" indexing placing result dimensions in original positions, while NumPy uses "vectorized"
indexing moving advanced index dimensions to the front.
This adds _numpy_style_advanced_indexing() to detect separated advanced indices and transpose results to match NumPy's dimension ordering, ensuring torch._numpy maintains compatibility with NumPy's indexing behavior.
Fixes cases like:
- arr[:, [0], :, 0] now returns shape (1, 5, 7) instead of (5, 1, 7)
- arr[:, [0, 1], :, 0] now returns shape (2, 5, 7) instead of (5, 2, 7)
Pull Request resolved: https://github.com/pytorch/pytorch/pull/157676
Approved by: https://github.com/manuelcandales
Co-authored-by: Claude <noreply@anthropic.com>
Changes:
1. Bump `ruff` from 0.7.4 to 0.8.4
2. Change `%`-formatted strings to f-string
3. Change arguments with the `__`-prefix to positional-only arguments with the `/` separator in function signature.
Pull Request resolved: https://github.com/pytorch/pytorch/pull/143753
Approved by: https://github.com/Skylion007
Migrates usages of deprecated APIs in NumPy-2.0 per [numpy-2.0 migration guide](https://numpy.org/devdocs/numpy_2_0_migration_guide.html#numpy-2-0-migration-guide).
I did a grep on the old API usages (see list below) and these were used only referenced in test files under `test/torch_np/numpy_tests/**/*.py`.
Specifically, migrates the usages of the following APIs:
1. `np.sctypes` → Access dtypes explicitly instead
2. `np.float_` → `np.float64`
3. `np.complex_` → `np.complex128`
4. `np.longcomplex` → `np.clongdouble`
5. `np.unicode_` → `np.str_`
6. `np.product` → `np.prod`
7. `np.cumproduct` → `np.cumprod`
8. `np.alltrue` → `np.all`
9. `np.sometrue` → `np.any`
Pull Request resolved: https://github.com/pytorch/pytorch/pull/131909
Approved by: https://github.com/rgommers, https://github.com/Skylion007, https://github.com/atalman
This PR follows https://github.com/pytorch/pytorch/pull/129374#pullrequestreview-2136555775 cc @malfet:
> Lots of formatting changes unrelated to PR goal, please keep them as part of separate PR (and please add lint rule if you want to enforce those, or at least cite one)
`usort` allows empty lines within import segments. For example, `usort` do not change the following code:
```python
import torch.aaa
import torch.bbb
import torch.ccc
x = ... # some code
```
```python
import torch.aaa
import torch.bbb
import torch.ccc
x = ... # some code
```
```python
import torch.aaa
import torch.bbb
import torch.ccc
x = ... # some code
```
This PR first sort imports via `isort`, then re-sort the file using `ufmt` (`usort` + `black`). This enforces the following import style:
1. no empty lines within segments.
2. single empty line between segments.
3. two spaces after import statements.
All the code snippets above will be formatted to:
```python
import torch.aaa
import torch.bbb
import torch.ccc
x = ... # some code
```
which produces a consistent code style.
Pull Request resolved: https://github.com/pytorch/pytorch/pull/129751
Approved by: https://github.com/malfet
This PR follows https://github.com/pytorch/pytorch/pull/129374#pullrequestreview-2136555775 cc @malfet:
> Lots of formatting changes unrelated to PR goal, please keep them as part of separate PR (and please add lint rule if you want to enforce those, or at least cite one)
`usort` allows empty lines within import segments. For example, `usort` do not change the following code:
```python
import torch.aaa
import torch.bbb
import torch.ccc
x = ... # some code
```
```python
import torch.aaa
import torch.bbb
import torch.ccc
x = ... # some code
```
```python
import torch.aaa
import torch.bbb
import torch.ccc
x = ... # some code
```
This PR first sort imports via `isort`, then re-sort the file using `ufmt` (`usort` + `black`). This enforces the following import style:
1. no empty lines within segments.
2. single empty line between segments.
3. two spaces after import statements.
All the code snippets above will be formatted to:
```python
import torch.aaa
import torch.bbb
import torch.ccc
x = ... # some code
```
which produces a consistent code style.
Pull Request resolved: https://github.com/pytorch/pytorch/pull/129751
Approved by: https://github.com/malfet
We should support these to whatever extent we can. They corresponding
`torch.uint<w>` types are defined, so I don't see an issue with
generating the various casting rules and allowing them to trace.
Pull Request resolved: https://github.com/pytorch/pytorch/pull/125717
Approved by: https://github.com/lezcano
The torch "fake" ndarray had some mismatches vs numpy.ndarray which caused test_sparse_to_sparse_compressed to fail under dynamo.
This also fixes (because the test now hits it) a problem where unpacking a sequence with the incorrect number of args would assert in dynamo instead of graph breaking (because it would throw an exception). Added a unit test for this condition.
Fixed:
- torch._numpy._ndarray.astype() (actually used by the test)
- torch._numpy._ndarray.put() (drive-by discovery)
- torch._numpy._ndarray.view() (drive-by discovery)
(burndown item 7)
Pull Request resolved: https://github.com/pytorch/pytorch/pull/117952
Approved by: https://github.com/yanboliang
ghstack dependencies: #117951
Dynamo creates Tensors when tracing through numpy ufuncs like np.sin, np.minimum etc. When running, np functions generally return Tensors when run with `torch.compile`. However, we currently require when normalizing `out` arguments that the input is an ndarray. This creates assertion errors when running torch.compile on any numpy function with an out argument:
```
def test_numpy_ufunc_out(self):
@torch.compile(backend="eager")
def foo():
x = np.arange(5)
out = np.empty((x.shape[0], x.shape[0]))
res_out = np.sin(x, out=out)
assert res_out is out
foo()
```
Failure with stack trace: https://gist.github.com/jamesjwu/68e217638d735678b3de968584dba23f
Instead, we can wrap tensors in an ndarray in normalize_outarray to handle the case correctly. Fixing this resolves ~220 tests under dynamo_test_failures, but also exposes a followup bug.
In the presence of a graph break, ndarrays don't preserve their id, which can affect assertions and `is` checks between numpy arrays:
```
def test_x_and_out_broadcast(self, ufunc):
x = self.get_x(ufunc)
out = np.empty((x.shape[0], x.shape[0]))
x_b = np.broadcast_to(x, out.shape)
# ufunc is just np.sin here
res_out = ufunc(x, out=out)
res_bcast = ufunc(x_b)
# passes
assert res_out is out
graph_break()
# fails
assert res_out is out
```
Regular tensors preserve their id because Dynamo caches their example tensor values across a graph break. However, with ndarrays, we only store their converted tensor values, and construct new ndarrays around those values:
eebe7e1d37/torch/_dynamo/variables/builder.py (L1083)
Added a test with expected failure to showcase this — we can then fix that issue separately.
Pull Request resolved: https://github.com/pytorch/pytorch/pull/118248
Approved by: https://github.com/lezcano
This is a lot of files changed! Don't panic! Here's how it works:
* Previously, we set `follow_imports = silent` for our mypy.ini configuration. Per https://mypy.readthedocs.io/en/stable/running_mypy.html#follow-imports, what this does is whenever we have an import to a module which is not listed as a file to be typechecked in mypy, we typecheck it as normal but suppress all errors that occurred in that file.
* When mypy is run inside lintrunner, the list of files is precisely the files covered by the glob in lintrunner.toml, but with files in excludes excluded.
* The top-level directive `# mypy: ignore-errors` instructs mypy to typecheck the file as normal, but ignore all errors.
* Therefore, it should be equivalent to set `follow_imports = normal`, if we put `# mypy: ignore-errors` on all files that were previously excluded from the file list.
* Having done this, we can remove the exclude list from .lintrunner.toml, since excluding a file from typechecking is baked into the files themselves.
* torch/_dynamo and torch/_inductor were previously in the exclude list, because they were covered by MYPYINDUCTOR. It is not OK to mark these as `# mypy: ignore-errors` as this will impede typechecking on the alternate configuration. So they are temporarily being checked twice, but I am suppressing the errors in these files as the configurations are not quite the same. I plan to unify the configurations so this is only a temporary state.
* There were some straggler type errors after these changes somehow, so I fixed them as needed. There weren't that many.
In the future, to start type checking a file, just remove the ignore-errors directive from the top of the file.
The codemod was done with this script authored by GPT-4:
```
import glob
exclude_patterns = [
...
]
for pattern in exclude_patterns:
for filepath in glob.glob(pattern, recursive=True):
if filepath.endswith('.py'):
with open(filepath, 'r+') as f:
content = f.read()
f.seek(0, 0)
f.write('# mypy: ignore-errors\n\n' + content)
```
Signed-off-by: Edward Z. Yang <ezyang@meta.com>
Pull Request resolved: https://github.com/pytorch/pytorch/pull/118414
Approved by: https://github.com/thiagocrepaldi, https://github.com/albanD
