Summary:
Extend coverage for the `NestedTensor` `unbind` operator to cases in which `ragged_idx != 1`.
Currently, the `unbind` operator in the `NestedTensor` class splits a tensor along the 0-th dimension, where the `ragged_idx` property, which controls the jagged dimension upon which `unbind` splits, is 1. This diff extends support for `ragged_idx != 1` in `NestedTensor`s, allowing `unbind` to split a tensor along a jagged dimension greater than 0 for `NestedTensor`s with and without the `lengths` property.
Test Plan:
Added the following unit tests:
`test_unbind_ragged_idx_equals_2_cpu`, `test_unbind_ragged_idx_equals_3_cpu`, and `test_unbind_ragged_idx_equals_last_dim_cpu` verify that `unbind` works for all jagged dimensions greater than 1, for `NestedTensor`s without `lengths`.
```
test_unbind_ragged_idx_equals_2_cpu (test_nestedtensor.TestNestedTensorSubclassCPU) ... ok
test_unbind_ragged_idx_equals_3_cpu (test_nestedtensor.TestNestedTensorSubclassCPU) ... ok
test_unbind_ragged_idx_equals_last_dim_cpu (test_nestedtensor.TestNestedTensorSubclassCPU) ... ok
```
`test_unbind_with_lengths_cpu` and `test_unbind_with_lengths_ragged_idx_equals_1_cpu` verify that `unbind` works when the jagged dimension is 1, for `NestedTensor`s with `lengths`.
```
test_unbind_with_lengths_cpu (test_nestedtensor.TestNestedTensorSubclassCPU) ... ok
test_unbind_with_lengths_ragged_idx_equals_1_cpu (test_nestedtensor.TestNestedTensorSubclassCPU) ... ok
```
`test_unbind_with_lengths_ragged_idx_equals_2_cpu` and `test_unbind_with_lengths_ragged_idx_equals_3_cpu` verify that `unbind` works when the jagged dimension is greater than 1, for `NestedTensor`s with `lengths`.
```
test_unbind_with_lengths_ragged_idx_equals_2_cpu (test_nestedtensor.TestNestedTensorSubclassCPU) ... ok
test_unbind_with_lengths_ragged_idx_equals_3_cpu (test_nestedtensor.TestNestedTensorSubclassCPU) ... ok
```
`test_unbind_with_lengths_ragged_idx_equals_0_cpu` verifies that `unbind` fails when the jagged dimension is 0 (the batch dimension), for `NestedTensor`s with `lengths`.
```
test_unbind_with_lengths_ragged_idx_equals_0_cpu (test_nestedtensor.TestNestedTensorSubclassCPU) ... ok
```
`test_unbind_with_lengths_ragged_idx_equals_2_bad_dim_cpu` verifies that `unbind` fails when there is a mismatch between the offsets and the jagged dimension, for `NestedTensor`s with `lengths`.
```
test_unbind_with_lengths_ragged_idx_equals_2_bad_dim_cpu (test_nestedtensor.TestNestedTensorSubclassCPU) ... ok
```
`test_unbind_with_wrong_lengths_cpu` verifies that `unbind` fails when the lengths exceed the limitations set by offsets, for `NestedTensor`s with `lengths`.
```
test_unbind_with_wrong_lengths_cpu (test_nestedtensor.TestNestedTensorSubclassCPU) ... ok
```
Differential Revision: D57942686
Pull Request resolved: https://github.com/pytorch/pytorch/pull/127493
Approved by: https://github.com/davidberard98
Fixes#123698
This PR makes TensorImpl::has_symbolic_sizes_strides return false for NestedTensors.
1. It passes in the actual sizes when we call `_make_wrapper_subclass` - this is the change that makes the subclass register as `has_symbolic_sizes_strides() == True`
2. It adds a field to `_make_wrapper_subclass` where an explicit `numel` can be provided. This allows us to skip the numel computation for the storage, which previously fails due to arithmetic on NestedInts.
3. Implements `aten::numel` for NJT - this is separate from the overridden numel in `make_wrapper_subclass` for now. Note also that this means that we leave `dispatch_sizes_strides_policy="sizes"`, so that we call into the custom `numel` implementation (as well as `sizes` and `strides`), because `numel` cannot currently be computed from `sizes` for NJT.
Note also that this depends on #121361, because calling TensorImpl::set_sizes_and_strides() tries to clone the sizes into the tensor, which means that we need `clone` to be implemented on NestedInt.
Differential Revision: [D57225736](https://our.internmc.facebook.com/intern/diff/D57225736)
Pull Request resolved: https://github.com/pytorch/pytorch/pull/124687
Approved by: https://github.com/albanD
Automatic fixes that replaces certain list comprehensions with generator ones where appropriate so that they are immediately consumed. This is preview functionality in ruff for rule C419 and it was automatically applied.
Co-authored-by: Nikita Shulga <2453524+malfet@users.noreply.github.com>
Pull Request resolved: https://github.com/pytorch/pytorch/pull/123960
Approved by: https://github.com/malfet
This PR:
* Introduces an ATen op for creating true jagged views from a dense values buffer
* `_nested_view_from_jagged(values, offsets, lengths, ragged_idx, dummy)`
* This ops is implemented on the Python side using torch.library so we can return a subclass instance
* `jagged_from_list()` now uses this instead of the old autograd.Function `NestedViewFromBuffer`
* The latter op is used for non-contiguous JTs returned via `torch.nested.narrow()`
* `dummy` is an awful hack to ensure that `NestedTensor.__torch_dispatch__()` is invoked for our view
* Introduces an ATen op for accessing the `values` component of an NT via a view
* `_nested_get_values(nt)`
* **Removes** the autograd.Functions `ViewNestedFromBuffer` and `ViewBufferFromNested` in favor of `nested_from_values_offsets()` / `nested_from_values_offsets_lengths()` and `nt.values()`, respectively.
* Changes test code to prefer `as_nested_tensor()` over `jagged_from_list()` directly
* Similarly, avoid `buffer_from_jagged()`, preferring `values()`
* Depends on general subclass view fake-ification on the PT2 side (handled solely in previous PRs in the stack)
With these changes, the semantics of jagged layout NTs are such that they are considered a true view of the underlying `values` buffer. This means views of jagged NTs are views of the underlying buffer as well, simplifying some handling.
Differential Revision: [D54269922](https://our.internmc.facebook.com/intern/diff/D54269922)
Co-authored-by: voznesenskym <voznesenskym@gmail.com>
Pull Request resolved: https://github.com/pytorch/pytorch/pull/113279
Approved by: https://github.com/ezyang
This PR:
* Introduces an ATen op for creating true jagged views from a dense values buffer
* `_nested_view_from_jagged(values, offsets, lengths, ragged_idx, dummy)`
* This ops is implemented on the Python side using torch.library so we can return a subclass instance
* `jagged_from_list()` now uses this instead of the old autograd.Function `NestedViewFromBuffer`
* The latter op is used for non-contiguous JTs returned via `torch.nested.narrow()`
* `dummy` is an awful hack to ensure that `NestedTensor.__torch_dispatch__()` is invoked for our view
* Introduces an ATen op for accessing the `values` component of an NT via a view
* `_nested_get_values(nt)`
* **Removes** the autograd.Functions `ViewNestedFromBuffer` and `ViewBufferFromNested` in favor of `nested_from_values_offsets()` / `nested_from_values_offsets_lengths()` and `nt.values()`, respectively.
* Changes test code to prefer `as_nested_tensor()` over `jagged_from_list()` directly
* Similarly, avoid `buffer_from_jagged()`, preferring `values()`
* Depends on general subclass view fake-ification on the PT2 side (handled solely in previous PRs in the stack)
With these changes, the semantics of jagged layout NTs are such that they are considered a true view of the underlying `values` buffer. This means views of jagged NTs are views of the underlying buffer as well, simplifying some handling.
Differential Revision: [D54269922](https://our.internmc.facebook.com/intern/diff/D54269922)
Co-authored-by: voznesenskym <voznesenskym@gmail.com>
Pull Request resolved: https://github.com/pytorch/pytorch/pull/113279
Approved by: https://github.com/ezyang
Before: `softmax` definition uses `jagged_unary_pointwise()` (wrong)
After: `softmax` impl adjusts the `dim` arg to account for the difference in dimensionality between the outer NT and the NT's `_values`
Pull Request resolved: https://github.com/pytorch/pytorch/pull/119459
Approved by: https://github.com/soulitzer
It should usually be safe to run pointwise binary ops with >2 inputs. e.g. threshold_backward(tensor, tensor, scalar): we just operate on the values of the nested tensors, and pass in the other args as-is.
Pull Request resolved: https://github.com/pytorch/pytorch/pull/119419
Approved by: https://github.com/soulitzer
Uses case: `_unsafe_view` is used in aot_autograd to create a view that doesn't register as a view:
eebe7e1d37/torch/_functorch/_aot_autograd/jit_compile_runtime_wrappers.py (L470-L476)
If a transposed nested tensor (i.e. NT with ragged_idx != 1) encounters this code path, it previously would fail for two reasons: 1) because `_unsafe_view` isn't registered, and 2) because ragged_idx != 1 is not supported. This PR adds support for `_unsafe_view` (completely reusing the implementation of `view`; this just registers `_unsafe_view` as another op using the same implementation). It also adds support for ragged_idx != 1, but only for trivial cases where inp._size == size (the use case used by aot_autograd).
Tests: verify that the result of `_unsafe_view` doesn't have a `_base`, and that simple views on transposed NTs work.
Differential Revision: [D53096814](https://our.internmc.facebook.com/intern/diff/D53096814)
Pull Request resolved: https://github.com/pytorch/pytorch/pull/118317
Approved by: https://github.com/soulitzer
This PR allows pointwise ops to operate on tensors with ragged_idx != 1. It does this by passing the ragged_idx metadata into the construction of the returned NestedTensor when computing pointwise ops. The assumption is that: pointwise ops can operate directly on the values tensors, and the resulting tensor should have all the same metadata properties as the input tensors. For binary ops, a test is added to verify that adding two tensors with different ragged_idx cannot be added.
Previously:
* unary pointwise ops would error out when performed on nested tensors with ragged_idx != 1
* binary pointwise ops would produce tensors with nonsense shapes
Differential Revision: [D53032641](https://our.internmc.facebook.com/intern/diff/D53032641)
Pull Request resolved: https://github.com/pytorch/pytorch/pull/118157
Approved by: https://github.com/jbschlosser
Summary:
Most NT operations end with creating a new NestedTensor, which is time-consuming. Trying to reduce overhead during the NestedTensor creation.
The ops return a new NestedTensor with the same offsets, so "tensor not in _tensor_symint_registry" would be false in most case. The "in" (__contain__) function takes ~8 us. If we use the "get" directly, then we save a few us for most NT operations.
Test Plan:
Before:
get_tensor_symint take 15us
https://pxl.cl/3XF83
After
get_tensor_symint take 10us
https://pxl.cl/3XFc9
Differential Revision: D51992836
Pull Request resolved: https://github.com/pytorch/pytorch/pull/115450
Approved by: https://github.com/soulitzer
Slight refactor to:
* lazily compute min / max seq_len used for flash. this avoids unnecessary graph breaks / specialization when we're not accessing these
* store min / max seq_len in a general `metadata_cache`. condensing these should make it easier to avoid specializing on these and others we may add in the future
Pull Request resolved: https://github.com/pytorch/pytorch/pull/115212
Approved by: https://github.com/soulitzer, https://github.com/ani300
ghstack dependencies: #114311
This PR removes the need for passing `ragged_size` into the `NestedTensor` constructor. This was an artifact of fake-ification, where sometimes we needed the NT to have a symbolic singleton symint shape for the ragged dimension. The new way of achieving this is to also store mappings between fake / functional tensors -> symbolic symints in the ragged structure registry. Now the `NestedTensor` constructor can just query this registry for the `ragged_size`.
Old: `NestedTensor(values, offsets, *, ragged_size=None, **kwargs)`
New: `NestedTensor(values, offsets, **kwargs)`
This makes it possible to have a `_nested_view_from_values_offsets(values, offsets)` without needing to pass a `ragged_size`.
Pull Request resolved: https://github.com/pytorch/pytorch/pull/113491
Approved by: https://github.com/ezyang, https://github.com/soulitzer
Summary:
Add split and layer_norm_backward.
Note: It is non trivial to support split_with_sizes backward so adding the split operation to support the use case in the model.
Test Plan: unit tests
Differential Revision: D51052966
Pull Request resolved: https://github.com/pytorch/pytorch/pull/113108
Approved by: https://github.com/soulitzer
This PR has a number of changes that improve subclass support for AOTAutograd/Inductor in general:
- previously if a subclass does extra aliasing between graph outputs/inputs in a way, the partitioner would complain because grad_outputs are the outputs reused as-is. Now we do a view_as(self) to workaround this.
- Use dense -> dense metadata when working with fwd_output_strides during backward. This is important since the stride information comes from inductor which sees the dense to dense graph.
- Inductor requires that the inputs to the compiled backward to match some expected strides computed during compilation. We make sure to make the inner tensors of the subclass contiguous (previously, we only made the subclass itself contiguous)
Changes specific to NestedTensor relevant to compilation:
- Properly handle the case where `__tensor_unflatten__` is passed non-symbolic dense tensors and with meta extracted from fake subclasses.
- Skip var_to_range logic for singleton int
- Skip size hint logic in inductor for singleton int
Pull Request resolved: https://github.com/pytorch/pytorch/pull/110529
Approved by: https://github.com/bdhirsh
This PR contains the changes needed to support using the NT jagged subclass within SAM. Note that a NT with multiple ragged dims is still required at the extremes for inputs / outputs, but the internal computation generally involves a single ragged dim, making the jagged layout usable.
Pull Request resolved: https://github.com/pytorch/pytorch/pull/109123
Approved by: https://github.com/cpuhrsch, https://github.com/soulitzer
In this PR:
- Adds support for strides for jagged tensor (design doc for this coming soon)
- NestedTensor skips automatic dynamic
- Make use of @bdhirsh's subclass fakification logic by adding the __tensor_{un,}flatten__ functions.
- Additional logic for fakification: since existing subclass fakification logic does not handle the case where the outer tensor has an additional dimension. We insert one-off logic to (1) insert an extra SingletonSymInt onto the fakified NestedTensor. (2) make sure we call track_symint on both the sizes on the inner and outer tensor during guard creation.
Remaining things that are weird:
- Still need to skip some logic in meta utils for some reason (I was going to write this up more, but decided not to since we're not able to do this anyway for a immediate reason: we cannot arbitrarily compare singleton ints. For now I'm just following Brian's advise from [here](https://github.com/pytorch/pytorch/pull/109171#discussion_r1328137070) )
Pull Request resolved: https://github.com/pytorch/pytorch/pull/109171
Approved by: https://github.com/ezyang, https://github.com/bdhirsh
