Fixes#156587
This sets lower bounds for fsspec and networkx in both setup.py and requirements,txt.
- fsspec>= 0.8.5 (released December 15, 2020)
- netowrkx>= 2.5.1 (released April 3, 2021)
These are the first stable versions released after Python 3.9 came out on October 5, 2020. Since Python 3.8 is no longer maintained, setting these minimums helps ensure PyTorch won't be installed alongside unexpectedly old versions of these packages.
Tested with these versions locally to make sure they don't break anything. Adding CI for lower-bound testing could be a follow up later if need.
Pull Request resolved: https://github.com/pytorch/pytorch/pull/158565
Approved by: https://github.com/janeyx99
Design doc: https://docs.google.com/document/d/1ncV7RpJ8xDwy8-_aCBfvZmpTTL824C-aoNPBLLVkOHM/edit?tab=t.0 (internal)
- Add codegen for static linkage
- refactor test code for test_compile_after_package tests
For now, the following options must be used together with `"aot_inductor.compile_standalone": True`.
"aot_inductor.package_cpp_only": True,
Will change `"aot_inductor.package_cpp_only"` to be automatically set to True in followup PR.
```
python test/inductor/test_aot_inductor_package.py -k test_compile_after_package
python test/inductor/test_aot_inductor_package.py -k test_run_static_linkage_model
```
Pull Request resolved: https://github.com/pytorch/pytorch/pull/157129
Approved by: https://github.com/desertfire
Change `build-system.build-backend`: `setuptools.build_meta:__legacy__` -> `setuptools.build_meta`. Also, move static package info from `setup.py` to `pyproject.toml`.
Now the repo can be installed from source via `pip` command instead of `python setup.py develop`:
```bash
python -m pip install --verbose --editable .
python -m pip install --verbose --no-build-isolation --editable .
```
In addition, the SDist is also buildable:
```bash
python -m build --sdist
python -m install dist/torch-*.tar.gz # build from source using SDist
```
Note that we should build the SDist with a fresh git clone if we will upload the output to PyPI. Because all files under `third_party` will be included in the SDist. The SDist file will be huge if the git submodules are initialized.
Pull Request resolved: https://github.com/pytorch/pytorch/pull/155998
Approved by: https://github.com/ezyang, https://github.com/cyyever, https://github.com/atalman
ghstack dependencies: #157557
Change `build-system.build-backend`: `setuptools.build_meta:__legacy__` -> `setuptools.build_meta`. Also, move static package info from `setup.py` to `pyproject.toml`.
Now the repo can be installed from source via `pip` command instead of `python setup.py develop`:
```bash
python -m pip install --verbose --editable .
python -m pip install --verbose --no-build-isolation --editable .
```
In addition, the SDist is also buildable:
```bash
python -m build --sdist
python -m install dist/torch-*.tar.gz # build from source using SDist
```
Note that we should build the SDist with a fresh git clone if we will upload the output to PyPI. Because all files under `third_party` will be included in the SDist. The SDist file will be huge if the git submodules are initialized.
Pull Request resolved: https://github.com/pytorch/pytorch/pull/155998
Approved by: https://github.com/ezyang, https://github.com/cyyever, https://github.com/atalman
This adds the `dist_info` command to the list of non-building commands of `setup.py`, which avoids the current situation where simple metadata generation with any packaging tool already triggers a build.
Pull Request resolved: https://github.com/pytorch/pytorch/pull/156709
Approved by: https://github.com/Skylion007
This PR includes the GBID weblink whenever a user encounters a graph break. I also had to include the JSON file in setup.py, so it can be part of the files that are packaged in during CI. It also fixes the issue of the hardcoded error messages stripping away one of the '/' in 'https'.
Pull Request resolved: https://github.com/pytorch/pytorch/pull/156033
Approved by: https://github.com/williamwen42
This PR includes the GBID weblink whenever a user encounters a graph break. I also had to include the JSON file in setup.py, so it can be part of the files that are packaged in during CI. It also fixes the issue of the hardcoded error messages stripping away one of the '/' in 'https'.
Pull Request resolved: https://github.com/pytorch/pytorch/pull/156033
Approved by: https://github.com/williamwen42
Since rocblas.dll and hipblaslt.dll are copied to torch/lib, rocblas and hipblaslt directories are needed to be stored there too (otherwise we have an error after wheel installation while searching for files in rocblas/library and hipblaslt/library which doesn't exist). This PR fixes this issue.
Pull Request resolved: https://github.com/pytorch/pytorch/pull/153144
Approved by: https://github.com/jeffdaily
Co-authored-by: Jeff Daily <jeff.daily@amd.com>
Summary:
Update fbgemm pinned version in PyTroch.
Related update in fbgemm: D74434751
Included changes:
Update fbgemm external dependencies directory in setup.py
Add DISABLE_FBGEMM_AUTOVEC flag to disable fbgemm's autovec
Test Plan: PyTorch OSS CI
Differential Revision: D75073516
Pull Request resolved: https://github.com/pytorch/pytorch/pull/153950
Approved by: https://github.com/Skylion007, https://github.com/ngimel
Follow up to @ezyang's PR #153020 , but better uses PEP621 to reduce redundant fields and pass through metadata better to uv, setuptools, poetry and other tooling.
* Enables modern tooling like uv sync and better support for tools like poetry.
* Also allows us to set project wide settings that are respected by linters and IDE (in this example we are able centralize the minimum supported python version).
* Currently most of the values are dynamically fetched from setuptools, eventually we can migrate all the statically defined values to pyproject.toml and they will be autopopulated in the setuptool arguments.
* This controls what additional metadata shows up on PyPi . Special URL Names are listed here for rendering on pypi: https://packaging.python.org/en/latest/specifications/well-known-project-urls/#well-known-labels
These also clearly shows us what fields will need to be migrated to pyproject.toml over time from setup.py per #152276. Static fields be fairly easy to migrate, the dynamically built ones like requirements are a bit more challenging.
Without this, `uv sync` complains:
```
error: No `project` table found in: `pytorch/pyproject.toml`
```
Pull Request resolved: https://github.com/pytorch/pytorch/pull/153055
Approved by: https://github.com/ezyang
This PR adds two main parts:
- shim.h stable C APIs into torch::Library APIs
- a higher level API in torch/csrc/stable/library.h that calls into this shim.h + otherwise is self contained
Goal: custom kernel writers should be able to call the apis in the directories above in order to register their library in a way that allows their custom extension to run with a different libtorch version than it was built with.
Subplots resolved:
- Do we want a whole separate StableLibrary or do we want to freeze torch::Library and add `m.stable_impl(cstring, void (*fn)(void **, int64_t, int64_t)` into it
- Yes, we want a separate StableLibrary. We cannot freeze Library and it is NOT header only.
- Should I use unint64_t as the common denominator instead of void* to support 32bit architectures better?
- Yes, and done
- Should I add a stable `def` and `fragment` when those can be done in python?
- I think we do want these --- and now they're done
- Where should library_stable_impl.cpp live? -- no longer relevant
- I need some solid test cases to make sure everything's going ok. I've intentionally thrown in a bunch of random dtypes into the signature, but I still haven't tested returning multiple things, returning nothing, complex dtypes, etc.
- Have since tested all the torch library endpoints. the others can be tested in a followup to separate components that need to be in shim.h vs can be added later
Pull Request resolved: https://github.com/pytorch/pytorch/pull/148124
Approved by: https://github.com/albanD, https://github.com/zou3519, https://github.com/atalman
# Fix typo errors across PyTorch codebase
This PR fixes various spelling errors throughout the PyTorch codebase to improve documentation quality and code readability.
## Changes Made
### Documentation Fixes
- Changed "seperate" to "separate" in multiple files:
- `setup.py`: Build system documentation
- `torch/_library/triton.py`: AOT compilation comments
- `torch/csrc/dynamo/compiled_autograd.h`: Node compilation documentation
- `torch/export/_unlift.py`: Pass population comments
- `torch/export/exported_program.py`: Decomposition table notes
### Code Comments and Error Messages
- Changed "occured" to "occurred" in:
- `test/mobile/test_lite_script_module.py`: Exception handling comments
- `torch/export/_draft_export.py`: Error message text
- `aten/src/ATen/native/cuda/linalg/BatchLinearAlgebra.cpp`: MAGMA bug comment
- `torch/csrc/utils/python_numbers.h`: Overflow handling comment
- `torch/csrc/jit/OVERVIEW.md`: Graph compilation documentation
- `torch/_dynamo/symbolic_convert.py`: Error explanation
### API Documentation
- Changed "fullfill" to "fulfill" in `torch/distributed/checkpoint/state_dict_loader.py`
- Changed "accross" to "across" in:
- `torch/csrc/distributed/c10d/ProcessGroupNCCL.cpp`
- `torch/distributed/distributed_c10d.py`
## Motivation
These changes improve code readability and maintain consistent spelling throughout the codebase. No functional changes were made; this is purely a documentation and comment improvement PR.
## Test Plan
No testing required as these changes only affect comments and documentation.
Pull Request resolved: https://github.com/pytorch/pytorch/pull/148262
Approved by: https://github.com/janeyx99
Co-authored-by: Jane (Yuan) Xu <31798555+janeyx99@users.noreply.github.com>
This PR adds two main parts:
- shim.h stable C APIs into torch::Library APIs
- a higher level API in torch/csrc/stable/library.h that calls into this shim.h + otherwise is self contained
Goal: custom kernel writers should be able to call the apis in the directories above in order to register their library in a way that allows their custom extension to run with a different libtorch version than it was built with.
Subplots resolved:
- Do we want a whole separate StableLibrary or do we want to freeze torch::Library and add `m.stable_impl(cstring, void (*fn)(void **, int64_t, int64_t)` into it
- Yes, we want a separate StableLibrary. We cannot freeze Library and it is NOT header only.
- Should I use unint64_t as the common denominator instead of void* to support 32bit architectures better?
- Yes, and done
- Should I add a stable `def` and `fragment` when those can be done in python?
- I think we do want these --- and now they're done
- Where should library_stable_impl.cpp live? -- no longer relevant
- I need some solid test cases to make sure everything's going ok. I've intentionally thrown in a bunch of random dtypes into the signature, but I still haven't tested returning multiple things, returning nothing, complex dtypes, etc.
- Have since tested all the torch library endpoints. the others can be tested in a followup to separate components that need to be in shim.h vs can be added later
Pull Request resolved: https://github.com/pytorch/pytorch/pull/148124
Approved by: https://github.com/albanD, https://github.com/zou3519
Ok, the build flag seems to have been broken for a while since the function it calls doesn't exist anymore.
Repurposed it to enable dispatcher printing (which requires a full (and slow) debug build otherwise).
Pull Request resolved: https://github.com/pytorch/pytorch/pull/145517
Approved by: https://github.com/bdhirsh
Useful for code reuse for Metal shader build both for eager mode and MPSInductor, but it requires one to implement `_cpp_embed_headers` tool that, as name suggests, would preprocess and embeds the for shader to be used in dynamic compilation.
Test using:
- `TestMetalLibrary.test_metal_include`
- Moving `i0`/`i1` implementation to `c10/util/metal_special_math.h` and call it from `SpecialOps.metal` shader, which now looks much more compact:
```metal
template <typename T, typename Tout = T>
void kernel
i0(constant T* input,
device Tout* output,
uint index [[thread_position_in_grid]]) {
output[index] = c10::i0(static_cast<Tout>(input[index]));
}
```
Pull Request resolved: https://github.com/pytorch/pytorch/pull/145087
Approved by: https://github.com/dcci
ghstack dependencies: #145023
