The `usort` config in `pyproject.toml` has no effect due to a typo. Fixing the typo make `usort` do more and generate the changes in the PR. Except `pyproject.toml`, all changes are generated by `lintrunner -a --take UFMT --all-files`.
Pull Request resolved: https://github.com/pytorch/pytorch/pull/127126
Approved by: https://github.com/kit1980
The `usort` config in `pyproject.toml` has no effect due to a typo. Fixing the typo make `usort` do more and generate the changes in the PR. Except `pyproject.toml`, all changes are generated by `lintrunner -a --take UFMT --all-files`.
Pull Request resolved: https://github.com/pytorch/pytorch/pull/127126
Approved by: https://github.com/kit1980
ghstack dependencies: #127122, #127123, #127124, #127125
- Rename `test_pytorch_common` -> `pytorch_test_common`, `test_onnx_common` -> `onnx_test_common`, removing the test_ prefix to show that the files are not test cases
- Remove import * in `test_pytorch_common` and adjust to import from `testing._internal.common_utils` (where functions are actually defined) instead
- Import modules only in `test_pytorch_onnx_onnxruntime` (too many to handle in a single PR in other tests) (The skips are exceptions)
Pull Request resolved: https://github.com/pytorch/pytorch/pull/81141
Approved by: https://github.com/BowenBao
* Move memory heavy tests from `test_pytorch_onnx_onnxruntime.py` to
`test_models_onnxruntime.py`. The former is run in parallel in CI,
while the latter is not. A change is that the moved tests are now
only covered in default opset export.
* Refactor and create base class for tests that export model to ONNX
and verify with ONNX Runtime. The new base class are parameterized
with `opset_version` and `is_script`. Further work can be done to
refactor existing test classes in `test_pytorch_onnx_onnxruntime.py`.
See #75630
* Reduce unnecessarily large tensor size in
`test_pytorch_onnx_onnxruntime.py` to further reduce memory usage
and test time.
After this PR, the running time for `test_pytorch_onnx_onnxruntime.py`
is reduced from `1338.82s (0:22:18)` to `225.07s (0:03:45)`,
benchmarked on 10900x with `-n 10`.
Fixes#79179
Pull Request resolved: https://github.com/pytorch/pytorch/pull/79640
Approved by: https://github.com/justinchuby, https://github.com/garymm
Use pyupgrade(https://github.com/asottile/pyupgrade) and flynt to modernize python syntax
```sh
pyupgrade --py36-plus --keep-runtime-typing torch/onnx/**/*.py
pyupgrade --py36-plus --keep-runtime-typing test/onnx/**/*.py
flynt torch/onnx/ --line-length 120
```
- Use f-strings for string formatting
- Use the new `super()` syntax for class initialization
- Use dictionary / set comprehension
Pull Request resolved: https://github.com/pytorch/pytorch/pull/77935
Approved by: https://github.com/BowenBao
Summary:
Tests under `test/onnx/test_models_onnxruntime.py` complains `AttributeError: 'TestModels' object has no attribute 'onnx_shape_inference'`.
This failure in CI appears suddenly without any code changes to related files. It is likely due to different test case run order. The test code was badly written such that test class `TestModels_new_jit_API`, if called first, will assign `TestModels.onnx_shape_inference = True`, circumventing this problem. On the other hand, if `TestModels` is called first, `AttributeError` will be raised.
Fixes https://github.com/pytorch/pytorch/issues/72337
Pull Request resolved: https://github.com/pytorch/pytorch/pull/72350
Reviewed By: jbschlosser, seemethere, janeyx99
Differential Revision: D34010794
Pulled By: malfet
fbshipit-source-id: 816f7bee89ea0251bb5df8f482b68f8dc4823997
(cherry picked from commit b39b23bec5)
Summary:
Pull Request resolved: https://github.com/pytorch/pytorch/pull/64380
* `example_outputs` used to determine the type and shape of the outputs without tracing the execution of the model. And it must be provided when exporting a ScriptModule or ScriptFunction when using export() function.
* Since we can work out `example_outputs` in internal function instead of being provided by user, so we deprecated this argument in the export() function to increase user experience of calling this function.
Test Plan: Imported from OSS
Reviewed By: ezyang
Differential Revision: D30905266
Pulled By: malfet
fbshipit-source-id: d00b00d7d02b365d165028288ad915678caa51f2
Co-authored-by: hwangdeyu <dejack953@outlook.com>
Summary:
Pull Request resolved: https://github.com/pytorch/pytorch/pull/58695
As PEP8 says: "Pick a rule and stick to it." [1]
[1] https://www.python.org/dev/peps/pep-0008/#string-quotes
Test Plan: Imported from OSS
Reviewed By: driazati
Differential Revision: D28714811
Pulled By: SplitInfinity
fbshipit-source-id: c95103aceb1725c17c034dc6fc8216627f189548
Co-authored-by: Gary Miguel <garymiguel@microsoft.com>
Summary:
As this diff shows, currently there are a couple hundred instances of raw `noqa` in the codebase, which just ignore all errors on a given line. That isn't great, so this PR changes all existing instances of that antipattern to qualify the `noqa` with respect to a specific error code, and adds a lint to prevent more of this from happening in the future.
Interestingly, some of the examples the `noqa` lint catches are genuine attempts to qualify the `noqa` with a specific error code, such as these two:
```
test/jit/test_misc.py:27: print(f"{hello + ' ' + test}, I'm a {test}") # noqa E999
test/jit/test_misc.py:28: print(f"format blank") # noqa F541
```
However, those are still wrong because they are [missing a colon](https://flake8.pycqa.org/en/3.9.1/user/violations.html#in-line-ignoring-errors), which actually causes the error code to be completely ignored:
- If you change them to anything else, the warnings will still be suppressed.
- If you add the necessary colons then it is revealed that `E261` was also being suppressed, unintentionally:
```
test/jit/test_misc.py:27:57: E261 at least two spaces before inline comment
test/jit/test_misc.py:28:35: E261 at least two spaces before inline comment
```
I did try using [flake8-noqa](https://pypi.org/project/flake8-noqa/) instead of a custom `git grep` lint, but it didn't seem to work. This PR is definitely missing some of the functionality that flake8-noqa is supposed to provide, though, so if someone can figure out how to use it, we should do that instead.
Pull Request resolved: https://github.com/pytorch/pytorch/pull/56272
Test Plan:
CI should pass on the tip of this PR, and we know that the lint works because the following CI run (before this PR was finished) failed:
- https://github.com/pytorch/pytorch/runs/2365189927
Reviewed By: janeyx99
Differential Revision: D27830127
Pulled By: samestep
fbshipit-source-id: d6dcf4f945ebd18cd76c46a07f3b408296864fcb
Summary:
Pull Request resolved: https://github.com/pytorch/pytorch/pull/53306
* [ONNX] Fix for sequence of mutations in blocks (#51577)
Fixes consecutive mutations in a tensor inside blocks.
Also, support append and pop in blocks.
* Support inplace operations + indexing
* Clean up old pass for remove mutations
* Add loop test
* Fixes for set attr in loops
* Removing the new jit API flag
* [ONNX] Redesign onnx pass to enable shape type dependent pattern conversion - cont (#51795)
With the introduction of ONNX shape inference, shape and type are inferred on the fly as operators get converted from ATen to ONNX when running symbolic function. This resolves the shape/type requirement for the symbolic functions. The pre-onnx passes however, can not be supported by shape inference, since at that stage the operators in the graph are still ATen operators.
This PR is to update the design of ONNX pass, to enable a mechanism of capturing subgraphs of ATen operators of certain patterns, and convert them later, when shape/type information of upstream operators are available.
The new design will require pre-onnx passes that need shape/type to be written in two parts, encapsulation and conversion.
The encapsulation part will find the nodes of patterns, like how pre-onnx passes were written previously. But instead of converting the nodes, it will encapsulate them into a sub-block of a new placeholder node. This part is called before onnx pass, so it runs before calling symbolic functions.
The conversion part will be called inside the onnx pass. In onnx pass, run_symbolic_func will be called for each node in topological order. When it reaches the placeholder node, the conversion part will be invoked. It will convert the nodes inside the sub-block based on pattern. By that time, it will have shape/type of upstream operators available. After the conversion is complete, the placeholder node will be removed, and nodes inside its sub-block converted. Run_symbolic_func will be called for these nodes, and they will be converted from ATen operator to ONNX operator.
This PR includes several other fixes, listed below.
* ~~replace helper.cpp with onnx_utils.cpp for holding utility functions.~~
* fix EraseNumberTypes on Bool type, the code was outdated that back then Bool type doesn't exist.
* ~~enable onnx shape inference in export with parameter/initializer data.~~
* other code clean ups.
* fix insertion of identity nodes for loop opset 13 sequence output.
~~PR depends on #51603~~
* Fix after merge
* clang
* Fix clang
* Fix clang
* Fix warning message.
* Fixes for non-model param attributes
* Fix for caffe2
* Additional test
* clang
* Skip test for lower opsets
* fix clang-tidy
* Update init.cpp
* Update remove_inplace_ops_for_onnx.cpp
* Update remove_inplace_ops_for_onnx.cpp
* Update remove_inplace_ops_for_onnx.cpp
* Fix for clang formatting
Test Plan: Imported from OSS
Reviewed By: pbelevich, malfet
Differential Revision: D26922416
Pulled By: SplitInfinity
fbshipit-source-id: e7108620b39b6404c594910786c4d275fee59d84
Co-authored-by: Bowen Bao <bowbao@microsoft.com>
Summary:
Fix a couple of issues with scripting inplace indexing in prepare_inplace_ops_for_onnx pass.
1- Tracing index copy (such as cases lik x[1:3] = data) already applies broadcasting on rhs if needed. The broadcasting node (aten::expand) is missing in scripting cases.
2- Inplace indexing with ellipsis (aten::copy_) is replaced with aten::index_put and then handled with slice+select in this pass.
Support for negative indices for this op added.
Shape inference is also enabled for scripting tests using new JIT API.
A few more tests are enabled for scripting.
Pull Request resolved: https://github.com/pytorch/pytorch/pull/44351
Reviewed By: ezyang
Differential Revision: D23880267
Pulled By: bzinodev
fbshipit-source-id: 78b33444633eb7ae0fbabc7415e3b16001f5207f
Summary:
Duplicate of https://github.com/pytorch/pytorch/issues/41413
This PR initiates the process of updating the torchsciprt backend interface used by ONNX exporter.
Replace jit lower graph pass by freeze module pass
Enable ScriptModule tests for ONNX operator tests (ORT backend) and model tests by default.
Replace jit remove_inplace_ops pass with remove_mutation and consolidation all passes for handling inplace ops.
Pull Request resolved: https://github.com/pytorch/pytorch/pull/43791
Reviewed By: houseroad
Differential Revision: D23421872
Pulled By: bzinodev
fbshipit-source-id: a98710c45ee905748ec58385e2a232de2486331b
Summary:
This PR initiates the process of updating the torchsciprt backend interface used by ONNX exporter.
- Replace jit lower graph pass by freeze module pass
- Enable ScriptModule tests for ONNX operator tests (ORT backend) and model tests by default.
Pull Request resolved: https://github.com/pytorch/pytorch/pull/41413
Reviewed By: VitalyFedyunin
Differential Revision: D22845258
Pulled By: bzinodev
fbshipit-source-id: d57fd4086f27bd0c3bf5f70af7fd0daa39a2814a
Summary:
This is an extension to the original PR https://github.com/pytorch/pytorch/pull/21765
1. Increase the coverage of different opsets support, comments, and blacklisting.
2. Adding backend tests for both caffe2 and onnxruntime on opset 7 and opset 8.
3. Reusing onnx model tests in caffe2 for onnxruntime.
Pull Request resolved: https://github.com/pytorch/pytorch/pull/22421
Reviewed By: zrphercule
Differential Revision: D16225518
Pulled By: houseroad
fbshipit-source-id: 01ae3eed85111a83a0124e9e95512b80109d6aee
