Summary: this adds some new dynamo_timed calls in cudagraph_trees, primarily with the aim to add cudagraph-related timing to scuba. Things to note:
* Uses the changes in https://github.com/pytorch/pytorch/pull/141919 to log "runtime" entries
* The logging for chromium/tlparse/scuba relies on us providing a compile_id since it's not available in the environment. A lot of the changes here are just passing around the compile_id
* I believe the spirit of the scuba logging is to capture the overheads of `torch.compile`. Therefore, I'm not adding _every_ dynamo_timed to scuba. For example, "run_eager" is the first real execution of the inductor graph -- it's not cudagraph overhead, per se. Watch out for the two instances of `dynamo_compile_runtime_column_us="runtime_cudagraphify_time_us"`. Those are the spots I believe are _extra_ overhead we'd contribute to torch.compile.
Test Plan:
`python benchmarks/dynamo/torchbench.py --performance --training --amp --backend inductor --device cuda --print-compilation-time --repeat 5 --cold-start-latency --only dcgan`:
* tlparse: https://fburl.com/21yrdn8h
* scuba: https://fburl.com/scuba/dynamo_compile/sandbox/wt90wnjz
`python benchmarks/dynamo/torchbench.py --performance --training --amp --backend inductor --device cuda --print-compilation-time --repeat 5 --cold-start-latency --only nanogpt`
* tlparse: https://fburl.com/r9mp7uiv
* scuba: https://fburl.com/scuba/dynamo_compile/sandbox/1nvx94re
Pull Request resolved: https://github.com/pytorch/pytorch/pull/143220
Approved by: https://github.com/eellison
Summary:
Add `node_mapping = create_node_mapping(pre_grad_graph_id, inductor_post_to_pre_grad_nodes, debug_info)`, to produce a `inductor_provenance_tracking_node_mappings.json` file. This file will be used by the provenance tracking highlighter tool to create provenance visualization.
`inductor_triton_kernel_to_post_grad_nodes.json` and `inductor_provenance_tracking_node_mappings.json` files are not dumped if they are both empty. So it's removed from some of the `test_structured_trace` tests.
Test Plan:
CI
```
buck run mode/dev-nosan fbcode//caffe2/test:fx -- -r graph_provenance
buck run mode/dev-nosan fbcode//caffe2/test/inductor:provenance_tracing
python test/dynamo/test_structured_trace.py
```
Differential Revision: D68190173
Pull Request resolved: https://github.com/pytorch/pytorch/pull/146103
Approved by: https://github.com/chenyang78
Landing D67612181 here. The original exported PR somehow fails OSS CI, but this one doesn't (though the PR content is the same).
Add debug trace artifact to inductor_triton_kernel_mapping_post_grad.json (debug artifact for provenance tracking) to tlparse.
Pull Request resolved: https://github.com/pytorch/pytorch/pull/145954
Approved by: https://github.com/YUNQIUGUO
`"compile_id"` had slipped into our generated Triton code (in the
metadata), which will defeat caching because the same kernels generated
in a different order would not cache hit with eachother.
Pull Request resolved: https://github.com/pytorch/pytorch/pull/143951
Approved by: https://github.com/oulgen
Fixes#130559
* Intro
This PR adds support for `@contextmanager` in Dynamo. We chose to limit the
scope of this work to only `@contextmanager` and plan to handle generators fully
in #141055 (still in draft).
* Motivation
Dynamo lacks support for generator functions. When it encounters one, it traces
it as if it were a regular function. This is problematic because it can lead to
incorrect behavior. To illustrate, consider the test case below:
```python
import torch
import contextlib
@contextlib.contextmanager
def set_default_dtype(dtype):
old_dtype = torch.get_default_dtype()
try:
torch.set_default_dtype(dtype)
yield
finally:
torch.set_default_dtype(old_dtype)
@torch.compile(backend="eager", fullgraph=True)
def fn():
with set_default_dtype(torch.float64):
x = torch.tensor([3.0, 3.0 + 5.0j])
return x
```
Before this work, Dynamo would not stop at the `yield`, and the graph produced
would contain both calls to `set_default_dtype` executed one after the other.
This is incorrect because the context manager should execute code before and
after the `yield`.
* List of changes
`YIELD_VALUE` now raises an exception (`YieldValueOp`) to signal that control
flow must be suspended and returned to the caller. Additionally, `RETURN_VALUE`
behaves differently in a generator function. Unlike regular functions, where
`RETURN_VALUE` indicates the final result, in generators it signifies that the
generator is exhausted and implicitly raises `StopIteration`.
A new `VariableTracker` named `FunctionDecoratedByContextlibContextManagerVariable`
was introduced to handle `@contextmanager`. This variable tracker acts not just
as a wrapper for the original function but also maintains an internal `tx`
(InstructionTranslator) object to suspend and return control flow to the parent
tracer when a `yield` is encountered.
* Corner cases
Returning a context manager from a compiled function is not supported. This
would require PyTorch to synchronize the generator state between Dynamo and the
interpreter. Any attempt to return it will result in an `IncorrectUsage`
exception.
Graph breaks require special handling as well. In the event of a graph break,
the frame associated with the context manager is skipped, and the context
manager runs in eager mode.
* This PR is breaking my code
There is a configuration flag (`enable_trace_contextlib`) that can be set to
`False` to disable tracing context managers. If this still causes crashes,
please revert this PR.
Pull Request resolved: https://github.com/pytorch/pytorch/pull/136033
Approved by: https://github.com/zou3519
Summary:
Add new structured logging "inductor_pre_grad_graph"
This is for inductor provenance tracking front-end to load this graph from tlparse.
ghstack-source-id: 257581974
exported-using-ghexport
Test Plan:
```
buck2 run 'fbcode//mode/dev-nosan' //caffe2/test/dynamo:test_dynamo -- -r StructuredTraceTest
```
Differential Revision: D67150288
Pull Request resolved: https://github.com/pytorch/pytorch/pull/143126
Approved by: https://github.com/desertfire
This turns on AOTAutogradCache for all inductor tests. It clears AOTAutogradCache on each test as well, by virtue of the local cache using the same directory to store cache entries.
I've also tested with INDUCTOR_TEST_DISABLE_FRESH_CACHE=1, running all the tests. AOTAutogradCache successfully caches 99% of these. There are a few tests that use view_replay and therefore save functional tensors, which cause AOTAutogradCache to fail to pickle its result. Will look into next steps there, but for now, it seems okay if the cache just misses on those cases where it can't serialize the result. It would be better to check before pickling, though.
I've made the following small bugfixes to get this working:
- Inductor is sometimes used in a standalone mode without dynamo, which leads to attribute errors in check_can_cache. In general, we should *never* crash in cache checking, only bypass. So I change a try catch to check Exception instead of just a specific exception.
- Add extra structured logging for metadata on cache hits
Pull Request resolved: https://github.com/pytorch/pytorch/pull/140890
Approved by: https://github.com/bdhirsh
Companion logger diff: https://www.internalfb.com/diff/D65012523
* Using float seconds for timestamps is bad because our internal system defaults to float32 precision and you don't even get second precision for timestamps in float32
* We decide to use microseconds instead of milliseconds because millisecond granularity you can end up with the same timestamp if compilation is happening very quickly; much better to force non-overlapping spans
* Because there are so many new fields and I don't feel like reimplementing each on BwdCompilationMetrics, BwdCompilationMetrics is no more, it's just that everything in CompilationMetrics is now optional.
* The actual frame compile times collection is not modified (still float) to reduce blast radius, so I just convert to microseconds before making the record. At float64 precision (Python's default), you get about microsecond precision on timestamps so shouldn't be a data problem (https://www.leebutterman.com/2021/02/01/store-your-unix-epoch-times-as-float64.html)
* I rename some entries for clarity. In particular, whenever a timing contains all of the its lower phases (e.g., how Inductor also contains Triton compilation) we put "cumulative" in its name. If something doesn't happen at compile time but is delayed until we have actual real inputs, we put "runtime" in its name.
Test plan:
```
buck2 run @mode/opt @mode/inplace //scripts/oulgen:runner
```
And then inspect https://fburl.com/scuba/dynamo_compile/sandbox/mslu7f5w and verify the us columns are populated and meaningful.
Signed-off-by: Edward Z. Yang <ezyang@meta.com>
Pull Request resolved: https://github.com/pytorch/pytorch/pull/138975
Approved by: https://github.com/masnesral
Summary: Capture the timing for the remote fx graph cache get and put operations and add them to the logger logging.
Test Plan:
1) Landed D64483593 and waited for logger actualization.
2) Ran test script on devserver: `buck2 run mode/opt scripts/slarsen/torch_compile_model:run`
3) Queried dynamo_compile/sandbox:
```
(pytorch-3.10_4) devvm2296:~/local/pytorch-3.10_4 $ scuba -e="select time,co_filename,remote_fx_graph_cache_get_time_s,remote_fx_graph_cache_put_time_s from \`dynamo_compile/sandbox\` where remote_fx_graph_cache_put_time_s is not null"
+------------+-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+----------------------------------+----------------------------------+
| time | co_filename | remote_fx_graph_cache_get_time_s | remote_fx_graph_cache_put_time_s |
+------------+-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+----------------------------------+----------------------------------+
| 1729136266 | null | 0.05652284622192383 | 0.9691152572631836 |
| 1729136263 | /data/users/slarsen/fbsource/buck-out/v2/gen/fbcode/289bb46b326874c6/scripts/slarsen/torch_compile_model/__run__/run-inplace#link-tree/scripts/slarsen/torch_compile_model/run.py | 0.8298435211181641 | 0.18642282485961914 |
+------------+-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+----------------------------------+----------------------------------+
```
Reviewed By: oulgen
Differential Revision: D64484025
Pull Request resolved: https://github.com/pytorch/pytorch/pull/138164
Approved by: https://github.com/jamesjwu, https://github.com/ezyang
Compiled Autograd uses this AOT inference path, but it shows up as "aot_forward_graph" in tlparse output, which causes it to not be easily differentiable from normal "aot_forward_graph"s that are also in the tlparse output. This PR renames it to "aot_inference_graph" which makes it easier to tell which tlparse graph block is from Compiled Autograd.
Pull Request resolved: https://github.com/pytorch/pytorch/pull/137803
Approved by: https://github.com/Microve, https://github.com/bdhirsh, https://github.com/ezyang
----
- We now record on CacheEntry what the compile id that populated it was, so now we can say why a specific frame was rejected
- Add structured log for recompiles under name artifact "recompile_reasons". As it stands, it's not terribly structured, but this was the easiest thing I could do to start
- Slightly reformat multi-reason printing; since we only report one guard failure seems better to have it as a single line
Example output:
```
V0703 10:34:13.273000 140345997743104 torch/_dynamo/guards.py:2590] [0/1] [__recompiles] Recompiling function f in /data/users/ezyang/a/pytorch/b.py:3
V0703 10:34:13.273000 140345997743104 torch/_dynamo/guards.py:2590] [0/1] [__recompiles] triggered by the following guard failure(s):
V0703 10:34:13.273000 140345997743104 torch/_dynamo/guards.py:2590] [0/1] [__recompiles] - 0/0: tensor 'L['x']' size mismatch at index 0. expected 4, actual 5
```
Signed-off-by: Edward Z. Yang <ezyang@meta.com>
Pull Request resolved: https://github.com/pytorch/pytorch/pull/130043
Approved by: https://github.com/anijain2305
