Summary:
Pull Request resolved: https://github.com/pytorch/pytorch/pull/49486
Remove code for Python 3.5 and lower.
There's more that can be removed/modernised, but sticking mainly to redundant version checks here, to keep the diff/PR smaller.
Pull Request resolved: https://github.com/pytorch/pytorch/pull/46579
Reviewed By: zou3519
Differential Revision: D24453571
Pulled By: ezyang
fbshipit-source-id: c2cfcf05d6c5f65df64d89c331692c9aec09248e
Summary:
No need for compatibility wrapper in Python3+ world
Pull Request resolved: https://github.com/pytorch/pytorch/pull/43981
Reviewed By: seemethere
Differential Revision: D23458325
Pulled By: malfet
fbshipit-source-id: 00f822895625f4867c22376fe558c50316f5974d
Summary:
Also add __prepare__ method metaclass created by `with_metaclass` to conform with PEP 3115
Pull Request resolved: https://github.com/pytorch/pytorch/pull/42232
Reviewed By: ezyang
Differential Revision: D22816936
Pulled By: malfet
fbshipit-source-id: a47d054b2f061985846d0db6b407f4e5df97b0d4
Summary:
Right now it is used to check whether `math.remainder` exists, which is the case for both Python-3.7 and 3.8
Pull Request resolved: https://github.com/pytorch/pytorch/pull/40868
Differential Revision: D22343454
Pulled By: malfet
fbshipit-source-id: 6b6d4869705b64c4b952309120f92c04ac7e39fd
Summary:
Remove PY3 and PY34 checks from `torch/testing/_internal/common_utils.py`
Remove PY35 global var from `torch.jit.annotations`
Always call `try_get_real_signature` in `torch/jit/annotations.py`
Use `map` instead of `imap`, since Python-2 is no longer support, so map is always lazy.
Remove all pre Python-3.6 checks from `torch/_six.py` and `torch/_appdirs.py`
Pull Request resolved: https://github.com/pytorch/pytorch/pull/39879
Differential Revision: D22037811
Pulled By: malfet
fbshipit-source-id: af0c79f976569c2059d39ecb49c6b8285161734f
Summary:
This PR implements the following linear algebra algorithms for low-rank matrices:
- [x] Approximate `A` as `Q Q^H A` - using Algorithm 4.4 from [Halko et al, 2009](http://arxiv.org/abs/0909.4061).
+ exposed as `torch.lowrank.get_approximate_basis(A, q, niter=2, M=None) -> Q`
+ [x] dense matrices
+ [x] batches of dense matrices
+ [x] sparse matrices
+ [x] documentation
- [x] SVD - using Algorithm 5.1 from [Halko et al, 2009](http://arxiv.org/abs/0909.4061).
+ uses `torch.lowrank.get_approximate_basis`
+ exposed as `torch.svd_lowrank(A, q=6, niter=2, M=None) -> (U, S, V)`
+ [x] dense matrices
+ [x] batches of dense matrices
+ [x] sparse matrices
+ [x] documentation
- [x] PCA - using `torch.svd_lowrank`
+ uses `torch.svd_lowrank`
+ exposed as `torch.pca_lowrank(A, center=True, q=None, niter=2) -> (U, S, V)`
+ [x] dense matrices
+ [x] batches of dense matrices
+ [x] sparse matrices, uses non-centered sparse matrix algorithm
+ [x] documentation
- [x] generalized eigenvalue solver using the original LOBPCG algorithm [Knyazev, 2001](https://epubs.siam.org/doi/abs/10.1137/S1064827500366124)
+ exposed as `torch.lobpcg(A, B=None, k=1, method="basic", ...)`
+ [x] dense matrices
+ [x] batches of dense matrices
+ [x] sparse matrices
+ [x] documentation
- [x] generalized eigenvalue solver using robust LOBPCG with orthogonal basis selection [Stathopoulos, 2002](https://epubs.siam.org/doi/10.1137/S1064827500370883)
+ exposed as `torch.lobpcg(A, B=None, k=1, method="ortho", ...)`
+ [x] dense matrices
+ [x] batches of dense matrices
+ [x] sparse matrices
+ [x] documentation
- [x] generalized eigenvalue solver using the robust and efficient LOBPCG Algorithm 8 from [Duersch et al, 2018](https://epubs.siam.org/doi/abs/10.1137/17M1129830) that switches to orthogonal basis selection automatically
+ the "ortho" method improves iterations so rapidly that in the current test cases it does not make sense to use the basic iterations at all. If users will have matrices for which basic iterations could improve convergence then the `tracker` argument allows breaking the iteration process at user choice so that the user can switch to the orthogonal basis selection if needed. In conclusion, there is no need to implement Algorithm 8 at this point.
- [x] benchmarks
+ [x] `torch.svd` vs `torch.svd_lowrank`, see notebook [Low-rank SVD](https://github.com/Quansight/pearu-sandbox/blob/master/pytorch/Low-rank%20SVD.ipynb). In conclusion, the low-rank SVD is going to be useful only for large sparse matrices where the full-rank SVD will fail due to memory limitations.
+ [x] `torch.lobpcg` vs `scipy.sparse.linalg.lobpcg`, see notebook [LOBPCG - pytorch vs scipy](https://github.com/Quansight/pearu-sandbox/blob/master/pytorch/LOBPCG%20-%20pytorch%20vs%20scipy.ipynb). In conculsion, both implementations give the same results (up to numerical errors from different methods), scipy lobpcg implementation is generally faster.
+ [x] On very small tolerance cases, `torch.lobpcg` is more robust than `scipy.sparse.linalg.lobpcg` (see `test_lobpcg_scipy` results)
Resolves https://github.com/pytorch/pytorch/issues/8049.
Pull Request resolved: https://github.com/pytorch/pytorch/pull/29488
Differential Revision: D20193196
Pulled By: vincentqb
fbshipit-source-id: 78a4879912424595e6ea95a95e483a37487a907e
Summary:
Pull Request resolved: https://github.com/pytorch/pytorch/pull/26666
Changes:
- Introduce a `ConcreteModuleType` concept. This acts both as the key into the type
cache, and as the source of truth for `ModuleValue::attr` queries. It needs
to do both jobs because that's how we ensure correctness (if the types are
different, it's because `ModuleValue::attr` would return different things).
- Now `recursive_script` will first construct a `ConcreteModuleType` and search for a
pre-existing type before starting compilation.
- All previous paths to creating a `ScriptModule` (including inheriting from
`ScriptModule`) are now rewritten to go through `create_script_module`, so
that we have only a single place where construction happens.
Behavioral changes:
- Big change to `torch.jit.ScriptModule` inheritance: all attributes are now
recursively scripted if possible, matching recursive scripting semantics.
This makes it hard to keep something from being scripted (for example, a
Python submodule). Possibly we'll need an `ignore()` type thing for
attributes. In particular, this adds `self.training` to *every* ScriptModule, since
it's present on every `nn.Module`.
- I believe this change to be transparent to existing users of the inheritance API, since if you had an attribute that is unscriptable that you never used, there is no error. In some cases, we will create new attributes (even if they are unused), which will increase serialized model size from before.
Test Plan: Imported from OSS
Differential Revision: D17551196
Pulled By: suo
fbshipit-source-id: b476d1c9feb3ddfd63406d90989aaf9dfe890591
Summary:
Pull Request resolved: https://github.com/pytorch/pytorch/pull/18598
ghimport-source-id: c74597e5e7437e94a43c163cee0639b20d0d0c6a
Stack from [ghstack](https://github.com/ezyang/ghstack):
* **#18598 Turn on F401: Unused import warning.**
This was requested by someone at Facebook; this lint is turned
on for Facebook by default. "Sure, why not."
I had to noqa a number of imports in __init__. Hypothetically
we're supposed to use __all__ in this case, but I was too lazy
to fix it. Left for future work.
Be careful! flake8-2 and flake8-3 behave differently with
respect to import resolution for # type: comments. flake8-3 will
report an import unused; flake8-2 will not. For now, I just
noqa'd all these sites.
All the changes were done by hand.
Signed-off-by: Edward Z. Yang <ezyang@fb.com>
Differential Revision: D14687478
fbshipit-source-id: 30d532381e914091aadfa0d2a5a89404819663e3
Summary:
* adds attributes to `ScriptModule.__getattr__` so they can be accessed in Python after re-importing
* full support for all the possible values for an `int64_t`
* this necessitated a bunch more `pushWhatever` functions, so re-introduced a templated version to cut down on duplicate code
* tests to validate references / value sharing works
* adds `torch.jit.Unpickler` which people can use to de-serialize the pickle files into Python / have a quick reference on how to do this without PyTorch
Pull Request resolved: https://github.com/pytorch/pytorch/pull/18188
Differential Revision: D14527490
Pulled By: driazati
fbshipit-source-id: efd15579cc04aa2e28c4b2c9490d82d849dee559
Summary:
Pull Request resolved: https://github.com/pytorch/pytorch/pull/18507
ghimport-source-id: 1c3642befad2da78a7e5f39d6d58732b85c76267
Stack from [ghstack](https://github.com/ezyang/ghstack):
* **#18507 Upgrade flake8-bugbear to master, fix the new lints.**
It turns out Facebobok is internally using the unreleased master
flake8-bugbear, so upgrading it grabs a few more lints that Phabricator
was complaining about but we didn't get in open source.
A few of the getattr sites that I fixed look very suspicious (they're
written as if Python were a lazy language), but I didn't look more
closely into the matter.
Signed-off-by: Edward Z. Yang <ezyang@fb.com>
Differential Revision: D14633682
fbshipit-source-id: fc3f97c87dca40bbda943a1d1061953490dbacf8
Summary:
We have:
- This is an initial stab at creating a type stub `torch/__init__.pyi` .
- This is only tested on Python 3, since that's the only Python version mypy
works on.
- So far, we only aim at doing this for torch functions and torch.Tensor.
- Quite a few methods and functions have to be typed manually. These are
done in `torch/__init__.pyi.in`
For me, PyCharm (the non-paid one) didn't seem to indicate errors in the .pyi when opening and seemed to be able to get the type hint for the few functions I tried, but I don't use PyCharm for my usual PyTorch activities, so I didn't extensively try this out.
An example of a generated PYI is at [this gist](https://gist.github.com/ezyang/bf9b6a5fa8827c52152858169bcb61b1).
Pull Request resolved: https://github.com/pytorch/pytorch/pull/12500
Differential Revision: D13695553
Pulled By: ezyang
fbshipit-source-id: 4566c71913ede4e4c23ebc4a72c17151f94e8e21
Summary:
Partially fixes: https://github.com/pytorch/pytorch/issues/394
Implementation detail:
Codegen is modified to generate codes that looks like below:
```C++
static PyObject * THPVariable_svd(PyObject* self_, PyObject* args, PyObject* kwargs)
{
HANDLE_TH_ERRORS
static PythonArgParser parser({
"svd(Tensor input, bool some=True, bool compute_uv=True, *, TensorList[3] out=None)",
}, /*traceable=*/true);
ParsedArgs<6> parsed_args;
auto r = parser.parse(args, kwargs, parsed_args);
static PyStructSequence_Field fields0[] = {
{"U", ""}, {"S", ""}, {"V", ""}, {nullptr}
};
static PyStructSequence_Desc desc0 = {
"torch.return_types.svd_out", nullptr,
fields0, 3
};
static PyTypeObject type0;
static bool namedtuple_type_initialized0 = false;
if (!namedtuple_type_initialized0) {
PyStructSequence_InitType(&type0, &desc0);
namedtuple_type_initialized0 = true;
}
static PyStructSequence_Field fields1[] = {
{"U", ""}, {"S", ""}, {"V", ""}, {nullptr}
};
static PyStructSequence_Desc desc1 = {
"torch.return_types.svd", nullptr,
fields1, 3
};
static PyTypeObject type1;
static bool namedtuple_type_initialized1 = false;
if (!namedtuple_type_initialized1) {
PyStructSequence_InitType(&type1, &desc1);
namedtuple_type_initialized1 = true;
}
if (r.idx == 0) {
if (r.isNone(3)) {
return wrap(&type1, dispatch_svd(r.tensor(0), r.toBool(1), r.toBool(2)));
} else {
auto results = r.tensorlist_n<3>(3);
return wrap(&type0, dispatch_svd(r.tensor(0), r.toBool(1), r.toBool(2), results[0], results[1], results[2]));
}
}
Py_RETURN_NONE;
END_HANDLE_TH_ERRORS
}
```
Types are defined as static member of `THPVariable_${op_name}` functions, and initialized at the first time the function is called.
When parsing function prototypes in `native_functions.yaml`, the parser will set the specified name as `field_name` when see things like `-> (Tensor t1, ...)`. These field names will be the field names of namedtuple. The class of namedtuples will be named `torch.return_types.${op_name}`.
In some python 2, `PyStructSequence` is not a subtype of tuple, so we have to create some functions to check if an object is a tuple or namedtuple for compatibility issue.
Operators in `native_functions.yaml` are changed such that only `max` and `svd` are generated as namedtuple. Tests are added for these two operators to see if the return value works as expected. Docs for these two ops are also updated to explicitly mention the return value is a namedtuple. More ops will be added in later PRs.
There is some issue with Windows build of linker unable to resolve `PyStructSequence_UnnamedField`, and some workaround is added to deal with this case.
Pull Request resolved: https://github.com/pytorch/pytorch/pull/15429
Differential Revision: D13709678
Pulled By: ezyang
fbshipit-source-id: 23a511c9436977098afc49374e9a748b6e30bccf
Summary:
Same as #14668, and was approved there.
ailzhang , please apply this patch to Horizon's `data_streamer.py`: https://gist.github.com/SsnL/020fdb3d6b7016d81b6ba1d04cc41459 Thank you!
Below is the original description at #14668:
As I am working on tasks in https://github.com/pytorch/pytorch/issues/13023, I realized how unreadable the code is because all functions to be run in multiprocessing must be at top global level. Adding more functionalities to `dataloader.py` will only make things worse.
So in this PR, I refactor `dataloader.py` and move much of it into `data._utils`. E.g., the `_worker_loop` and related methods are now in `data._utils.worker`, signal handling code in `data._utils.signal_handling`, collating code in `data._utils.collate`, etc. This split, IMHO, makes code much clearer. I will base my future changes to DataLoader on top of this.
No functionality is changed, except that I added `torch._six.queue`.
Pull Request resolved: https://github.com/pytorch/pytorch/pull/15331
Reviewed By: yf225
Differential Revision: D13503120
Pulled By: ailzhang
fbshipit-source-id: 94df16b4d80ad1102c437cde0d5a2e62cffe1f8e
Summary:
As I am working on tasks in https://github.com/pytorch/pytorch/issues/13023, I realized how unreadable the code is because all functions to be run in multiprocessing must be at top global level. Adding more functionalities to `dataloader.py` will only make things worse.
So in this PR, I refactor `dataloader.py` and move much of it into `data._utils`. E.g., the `_worker_loop` and related methods are now in `data._utils.worker`, signal handling code in `data._utils.signal_handling`, collating code in `data._utils.collate`, etc. This split, IMHO, makes code much clearer. I will base my future changes to DataLoader on top of this.
No functionality is changed, except that I added `torch._six.queue`.
Pull Request resolved: https://github.com/pytorch/pytorch/pull/14668
Reviewed By: soumith
Differential Revision: D13289919
Pulled By: ailzhang
fbshipit-source-id: d701bc7bb48f5dd7b163b5be941a9d27eb277a4c
Summary:
Adds support for weak script modules created that get compiled to `ScriptModule`s once added as a submodule of a `ScriptModule`:
```python
weak_module
class Test(torch.nn.Module):
...
weak_script_method
def forward(self, x):
...
```
Pull Request resolved: https://github.com/pytorch/pytorch/pull/12682
Differential Revision: D10458626
Pulled By: driazati
fbshipit-source-id: 10ae23cb83cdafc4646cee58f399e14b2e60acd4
Instead of initializing CUDA immediately and executing them,
we wait until we actually initialize CUDA before executing.
To keep things debuggable, we also keep track of the original
backtrace when these functions are called, so we can inform
users where they actually called the seeding/state functions
(as opposed to the first time they actually initialized the
RNG).
Fixes#2517
Signed-off-by: Edward Z. Yang <ezyang@fb.com>
