The previous macro implementations just cast the argument to a target
type but did not check whether the input type was appropriate. The
function implementation can do better type checking of the input type.
For the *GetDatumFast() macros, converting to an inline function
doesn't work in the !USE_FLOAT8_BYVAL case, but we can use
AssertVariableIsOfTypeMacro() to get a similar level of type checking.
Reviewed-by: Aleksander Alekseev <aleksander@timescale.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/8528fb7e-0aa2-6b54-85fb-0c0886dbd6ed%40enterprisedb.com
RelFileNumbers are now assigned using a separate counter, instead of
being assigned from the OID counter. This counter never wraps around:
if all 2^56 possible RelFileNumbers are used, an internal error
occurs. As the cluster is limited to 2^64 total bytes of WAL, this
limitation should not cause a problem in practice.
If the counter were 64 bits wide rather than 56 bits wide, we would
need to increase the width of the BufferTag, which might adversely
impact buffer lookup performance. Also, this lets us use bigint for
pg_class.relfilenode and other places where these values are exposed
at the SQL level without worrying about overflow.
This should remove the need to keep "tombstone" files around until
the next checkpoint when relations are removed. We do that to keep
RelFileNumbers from being recycled, but now that won't happen
anyway. However, this patch doesn't actually change anything in
this area; it just makes it possible for a future patch to do so.
Dilip Kumar, based on an idea from Andres Freund, who also reviewed
some earlier versions of the patch. Further review and some
wordsmithing by me. Also reviewed at various points by Ashutosh
Sharma, Vignesh C, Amul Sul, Álvaro Herrera, and Tom Lane.
Discussion: http://postgr.es/m/CA+Tgmobp7+7kmi4gkq7Y+4AM9fTvL+O1oQ4-5gFTT+6Ng-dQ=g@mail.gmail.com
Previously, these were declared in postgres_ext.h, but they are not
needed nearly so widely as the OID declarations, so that doesn't
necessarily make sense. Also, because postgres_ext.h is included
before most of c.h has been processed, the previous location creates
some problems for a pending patch.
Patch by me, reviewed by Dilip Kumar.
Discussion: http://postgr.es/m/CA+TgmoYc8oevMqRokZQ4y_6aRn-7XQny1JBr5DyWR_jiFtONHw@mail.gmail.com
Push the units fields over to the left so that all the single-bit
flags can be together. I considered rearranging the single-bit
flags to try to group flags with similar purposes, but eventually
decided that that involved too many judgment calls.
Discussion: https://postgr.es/m/17385-9ee529fb091f0ce5@postgresql.org
Previously, the transaction-property GUCs such as transaction_isolation
could be reset after starting a transaction, because we marked them
as GUC_NO_RESET_ALL but still allowed a targeted RESET. That leads to
assertion failures or worse, because those properties aren't supposed
to change after we've acquired a transaction snapshot.
There are some NO_RESET_ALL variables for which RESET is okay, so
we can't just redefine the semantics of that flag. Instead introduce
a separate GUC_NO_RESET flag. Mark "seed", as well as the transaction
property GUCs, as GUC_NO_RESET.
We have to disallow GUC_ACTION_SAVE as well as straight RESET, because
otherwise a function having a "SET transaction_isolation" clause can
still break things: the end-of-function restore action is equivalent
to a RESET.
No back-patch, as it's conceivable that someone is doing something
this patch will forbid (like resetting one of these GUCs at transaction
start, or "CREATE FUNCTION ... SET transaction_read_only = 1") and not
running into problems with it today. Given how long we've had this
issue and not noticed, the side effects in non-assert builds can't be
too serious.
Per bug #17385 from Andrew Bille.
Masahiko Sawada
Discussion: https://postgr.es/m/17385-9ee529fb091f0ce5@postgresql.org
While at it, remove an unused queryString parameter from
CheckPubRelationColumnList() and make other minor stylistic changes.
Backpatch to 15.
Reported by Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Co-authored-by: Hou zj <houzj.fnst@fujitsu.com>
Discussion: https://postgr.es/m/20220926.160426.454497059203258582.horikyota.ntt@gmail.com
We weren't jumbling the merge action list, so wildly different commands
would be considered to use the same query ID. Add that, mention it in
the docs, and some test lines.
Backpatch to 15.
Author: Tatsu <bt22nakamorit@oss.nttdata.com>
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Discussion: https://postgr.es/m/d87e391694db75a038abc3b2597828e8@oss.nttdata.com
This was used as the returned result type of the generated contents for
the backup_label and backup history files. This is replaced by a simple
string, reducing the cleanup burden of all the callers of
build_backup_content().
Reviewed-by: Bharath Rupireddy
Discussion: https://postgr.es/m/YzERvNPaZivHEKZJ@paquier.xyz
Historically we've been more worried about making the output of
float fields look pretty than whether they'd be read back exactly.
That won't work if we're to compare the read-back nodes for
equality, so switch to using the Ryu code for float output.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/4159834.1657405226@sss.pgh.pa.us
Historically, outToken has represented both NULL and empty-string
strings as "<>", which readfuncs.c then read as NULL, thus failing
to preserve empty-string fields accurately. Remarkably, this has
not caused any serious problems yet, but let's fix it.
We'll keep the "<>" notation for NULL, and use """" for empty string,
because that matches other notational choices already in use.
An actual input string of """" is converted to "\""" (this was true
already, apparently as a hangover from an ancient time when string
quoting was handled directly by pg_strtok).
CHAR fields also use "<>", but for '\0'.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/4159834.1657405226@sss.pgh.pa.us
This change simplifies some of the logic related to the generation and
creation of the backup_label and backup history files, which has become
unnecessarily complicated since the removal of the exclusive backup mode
in commit 39969e2. The code was previously generating the contents of
these files as a string (start phase for the backup_label and stop phase
for the backup history file), one problem being that the contents of the
backup_label string were scanned to grab some of its internal contents
at the stop phase.
This commit changes the logic so as we store the data required to build
these files in an intermediate structure named BackupState. The
backup_label file and backup history file strings are generated when
they are ready to be sent back to the client. Both files are now
generated with the same code path. While on it, this commit renames
some variables for clarity.
Two new files named xlogbackup.{c,h} are introduced in this commit, to
remove from xlog.c some of the logic around base backups. Note that
more could be moved to this new set of files.
Author: Bharath Rupireddy, Michael Paquier
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/CALj2ACXWwTDgJqCjdaPyfR7djwm6SrybGcrZyrvojzcsmt4FFw@mail.gmail.com
Commit 25936fd46 adjusted things so that the "storeslot" we use
for remapping trigger tuples would have adequate lifespan, but it
neglected to consider the lifespan of the tuple descriptor that
the slot depends on. It turns out that in at least some cases, the
tupdesc we are passing is a refcounted tupdesc, and the refcount for
the slot's reference can get assigned to a resource owner having
different lifespan than the slot does. That leads to an error like
"tupdesc reference 0x7fdef236a1b8 is not owned by resource owner
SubTransaction". Worse, because of a second oversight in the same
commit, we'd try to free the same tupdesc refcount again while
cleaning up after that error, leading to recursive errors and an
"ERRORDATA_STACK_SIZE exceeded" PANIC.
To fix the initial problem, let's just make a non-refcounted copy
of the tupdesc we're supposed to use. That seems likely to guard
against additional problems, since there's no strong reason for
this code to assume that what it's given is a refcounted tupdesc;
in which case there's an independent hazard of the tupdesc having
shorter lifespan than the slot does. (I didn't bother trying to
free said copy, since it should go away anyway when the (sub)
transaction context is cleaned up.)
The other issue can be fixed by making the code added to
AfterTriggerFreeQuery work like the rest of that function, ie be
sure that it doesn't try to free the same slot twice in the event
of recursive error cleanup.
While here, also clean up minor stylistic issues in the test case
added by 25936fd46: don't use "create or replace function", as any
name collision within the tests is likely to have ill effects
that that won't mask; and don't use function names as generic as
trigger_function1, especially if you're not going to drop them
at the end of the test stanza.
Per bug #17607 from Thomas Mc Kay. Back-patch to v12, as the
previous fix was.
Discussion: https://postgr.es/m/17607-bd8ccc81226f7f80@postgresql.org
Commit 4fb5c794e intended to add coverage of some ambuildempty
methods that were not getting reached, without removing any
test coverage. However, by changing a temp table to unlogged
it managed to negate the intent of 4c51a2d1e, which means that
we didn't have reliable test coverage of ginvacuum.c anymore.
As things stand, much of that file might or might not get reached
depending on timing, which seems pretty undesirable.
Although this is only clearly broken for the GIN test, it seems
best to revert 4fb5c794e altogether and instead add bespoke test
cases covering unlogged indexes for these four AMs. We don't
need to do very much with them, so the extra tests are cheap.
(Note that btree, hash, and bloom already have similar test cases,
so they need no additional work.)
We can also undo dec8ad367. Since the testing deficiency that that
hacked around was later fixed by 2f2e24d90, let's intentionally leave
an unlogged table behind to improve test coverage in the modules that
use the regression database for other test purposes. (The case I used
also leaves an unlogged sequence behind.)
Per report from Alex Kozhemyakin. Back-patch to v15 where the
faulty test came in.
Discussion: https://postgr.es/m/b00c8ee096ee46cd25c183125562a1a7@postgrespro.ru
The node types A_Const, Constraint, and A_Expr had custom output
functions, but no read functions were implemented so far.
The A_Expr output format had to be tweaked a bit to make it easier to
parse.
Be a bit more cautious about applying strncmp to unterminated strings.
Also error out if an unrecognized enum value is found in each case,
instead of just printing a placeholder value. That was maybe ok for
debugging but won't work if we want to have robust round-tripping.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/4159834.1657405226@sss.pgh.pa.us
The node tokenizer went out of its way to store BitString node values
without the leading 'b'. But everything else in the system stores the
leading 'b'. This would break if a BitString node is
read-printed-read.
Also, the node tokenizer didn't know that BitString node tokens could
also start with 'x'.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/4159834.1657405226@sss.pgh.pa.us
The main parser checks whether a literal fits into an int when
deciding whether it should be put into an Integer or Float node. The
parser processes integer literals without signs. So a most-negative
integer literal will not fit into Integer and will end up as a Float
node.
The node tokenizer did this differently. It included the sign when
checking whether the literal fit into int. So a most-negative integer
would indeed fit that way and end up as an Integer node.
In order to preserve the node structure correctly, we need the node
tokenizer to also analyze integer literals without sign.
There are a number of test cases in the regression tests that have a
most-negative integer argument of some utility statement, so this
issue is easily reproduced under WRITE_READ_PARSE_PLAN_TREES.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/4159834.1657405226@sss.pgh.pa.us
There's really no need to build win32ver.rc as part of building
pgmsgevent.rc. This will make it sligthly easier to add rc file generation to
the meson build.
Because index creation does not go through heap_create_with_catalog() we
didn't call pgstat_create_relation(), leading to index stats of a newly
created realtion not getting dropped during rollback. To fix, move the
pgstat_create_relation() to heap_create(), which indexes do use.
Similarly, because dropping an index does not go through
heap_drop_with_catalog(), we didn't drop index stats when the transaction
dropping an index committed. Here there's no convenient common path for
indexes and relations, so index_drop() now calls pgstat_drop_relation().
Add tests for transactional index stats handling.
Author: "Drouvot, Bertrand" <bdrouvot@amazon.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/51bbf286-2b4a-8998-bd12-eaae4b765d99@amazon.com
Backpatch: 15-, like 8b1dccd37c, which introduced the bug
The extended query protocol implementation I added in commit
acb7e4eb6b has bugs when used in pipeline mode. Rather than spend
more time trying to fix it, remove that code and make the function rely
on simple query protocol only, meaning it can no longer be used in
pipeline mode.
Users can easily change their applications to use PQsendQueryParams
instead. We leave PQsendQuery in place for Postgres 14, just in case
somebody is using it and has not hit the mentioned bugs; but we should
recommend that it not be used.
Backpatch to 15.
Per bug report from Gabriele Varrazzo.
Discussion: https://postgr.es/m/CA+mi_8ZGSQNmW6-mk_iSR4JZB_LJ4ww3suOF+1vGNs3MrLsv4g@mail.gmail.com
The "emulation" I wrote for PQsendQuery in pipeline mode to use extended
query protocol, in commit acb7e4eb6b, is problematic. Due to numerous
bugs we'll soon remove it. As a first step and for all branches back to
14, stop using PQsendQuery in libpq_pipeline. Also remove a few test
lines that will no longer be relevant.
Backpatch to 14.
Discussion: https://postgr.es/m/CA+mi_8ZGSQNmW6-mk_iSR4JZB_LJ4ww3suOF+1vGNs3MrLsv4g@mail.gmail.com
We previously thought that allowing such cases can confuse users when they
specify DROP TABLES IN SCHEMA but that doesn't seem to be the case based
on discussion. This helps to uplift the restriction during
ALTER TABLE ... SET SCHEMA which used to ensure that we couldn't end up
with a publication having both a schema and the same schema's table.
To allow this, we need to forbid having any schema on a publication if
column lists on a table are specified (and vice versa). This is because
otherwise we still need a restriction during ALTER TABLE ... SET SCHEMA to
forbid cases where it could lead to a publication having both a schema and
the same schema's table with column list.
Based on suggestions by Peter Eisentraut.
Author: Hou Zhijie and Vignesh C
Reviewed-By: Peter Smith, Amit Kapila
Backpatch-through: 15, where it was introduced
Discussion: https://postgr.es/m/2729c9e2-9aac-8cda-f2f4-34f2bcc18f4e@enterprisedb.com
Make sure that function declarations use names that exactly match the
corresponding names from function definitions in pg_dump/pg_dumpall
related code.
Affected code happens to be inconsistent in how it applies conventions
around how Archive and Archive Handle variables are named. Significant
code churn is required to fully fix those inconsistencies, so take the
least invasive approach possible: treat function definition names as
authoritative, and mechanically adjust corresponding names from function
definitions to match.
Like other recent commits that cleaned up function parameter names, this
commit was written with help from clang-tidy.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CAH2-Wzmma+vzcO6gr5NYDZ+sx0G14aU-UrzFutT2FoRaisVCUQ@mail.gmail.com
Make ecpg function declarations consistently use named parameters. Also
make sure that the declarations use names that match corresponding names
from function definitions.
Like other recent commits that cleaned up function parameter names, this
commit was written with help from clang-tidy.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/CAH2-WznJt9CMM9KJTMjJh_zbL5hD9oX44qdJ4aqZtjFi-zA3Tg@mail.gmail.com
This may be a bit too subtle, but removing that word from there makes
this clause no longer a perfect parallel of the GRANT variant "ALL
TABLES IN SCHEMA": indeed, for publications what we record is the schema
itself, not the tables therein, which means that any tables added to the
schema in the future are also published. This is completely different
to what GRANT does, which is affect only the tables that exist when the
command is executed.
There isn't resounding support for this change, but there are a few
positive votes and no opposition. Because the time to 15 RC1 is very
short, let's get this out now.
Backpatch to 15.
Discussion: https://postgr.es/m/2729c9e2-9aac-8cda-f2f4-34f2bcc18f4e
The bounds hardcoded in compression.c since ffd5365 (minimum at 1 and
maximum at 22) do not match the reality of what zstd is able to
handle, these values being available via ZSTD_maxCLevel() and
ZSTD_minCLevel() at run-time. The maximum of 22 is actually correct
in recent versions, but the minimum was not as the library can go down
to -131720 by design. This commit changes the code to use the run-time
values in the code instead of some hardcoded ones.
Zstd seems to assume that these bounds could change in the future, and
Postgres will be able to adapt automatically to such changes thanks to
what's being done in this commit.
Reported-by: Justin Prysby
Discussion: https://postgr.es/m/20220922033716.GL31833@telsasoft.com
Backpatch-through: 15
Autoconf is showing its age, fewer and fewer contributors know how to wrangle
it. Recursive make has a lot of hard to resolve dependency issues and slow
incremental rebuilds. Our home-grown MSVC build system is hard to maintain for
developers not using Windows and runs tests serially. While these and other
issues could individually be addressed with incremental improvements, together
they seem best addressed by moving to a more modern build system.
After evaluating different build system choices, we chose to use meson, to a
good degree based on the adoption by other open source projects.
We decided that it's more realistic to commit a relatively early version of
the new build system and mature it in tree.
This commit adds an initial version of a meson based build system. It supports
building postgres on at least AIX, FreeBSD, Linux, macOS, NetBSD, OpenBSD,
Solaris and Windows (however only gcc is supported on aix, solaris). For
Windows/MSVC postgres can now be built with ninja (faster, particularly for
incremental builds) and msbuild (supporting the visual studio GUI, but
building slower).
Several aspects (e.g. Windows rc file generation, PGXS compatibility, LLVM
bitcode generation, documentation adjustments) are done in subsequent commits
requiring further review. Other aspects (e.g. not installing test-only
extensions) are not yet addressed.
When building on Windows with msbuild, builds are slower when using a visual
studio version older than 2019, because those versions do not support
MultiToolTask, required by meson for intra-target parallelism.
The plan is to remove the MSVC specific build system in src/tools/msvc soon
after reaching feature parity. However, we're not planning to remove the
autoconf/make build system in the near future. Likely we're going to keep at
least the parts required for PGXS to keep working around until all supported
versions build with meson.
Some initial help for postgres developers is at
https://wiki.postgresql.org/wiki/Meson
With contributions from Thomas Munro, John Naylor, Stone Tickle and others.
Author: Andres Freund <andres@anarazel.de>
Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Author: Peter Eisentraut <peter@eisentraut.org>
Reviewed-By: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/20211012083721.hvixq4pnh2pixr3j@alap3.anarazel.de
If the ps display is not cleared at this point, the process could
continue displaying "recovering NNN" even if handling end-of-recovery
steps. df9274a has tackled that by providing some information with the
end-of-recovery checkpoint but 7ff23c6 has nullified the effect of the
first commit.
Per a suggestion from Justin, just clear the ps display when we are done
with recovery, so as no incorrect information is displayed. This may
get extended in the future, but for now restore the pre-7ff23c6
behavior.
Author: Justin Prysby
Discussion: https://postgr.es/m/20220913223954.GU31833@telsasoft.com
Backpatch-through: 15
This commit updates two code paths to use pg_lfind32() introduced by
b6ef167 with TransactionId arrays:
- At the end of TransactionIdIsInProgress(), when checking for the case
of still running but overflowed subxids.
- XidIsConcurrent(), when checking for a serializable conflict.
These cases are less impactful than 37a6e5d, but a bit of
micro-benchmarking of this API shows that linear search speeds up by
~20% depending on the number of items involved (x86_64 and amd64 looked
at here).
Author: Nathan Bossart
Reviewed-by: Richard Guo, Michael Paquier
Discussion: https://postgr.es/m/20220901185153.GA783106@nathanxps13
Commit 7103ebb7aa added the tab-completion for MERGE accidentally
in the middle of that for LOCK TABLE. This commit fixes this issue.
This also adds some tab-completion for MERGE.
Back-patch to v15 where MERGE was introduced.
Author: Kotaro Kawamoto, Fujii Masao
Reviewed-by: Shinya Kato, Álvaro Herrera
Discussion: https://postgr.es/m/9f1ad2a87a58cd5e7d64f3993130958d@oss.nttdata.com
Make sure that function declarations use names that exactly match the
corresponding names from function definitions for several "lexer
adjacent" backend functions.
These functions were missed by recent commits because they were obscured
by clang-tidy warnings about functions whose signature is directly under
the control of the lexer (flex seems to always generate function
declarations with unnamed parameters). We probably can't fix most of
the warnings it generates for translation units that get built from .l
and .y files, but we can at least do this much.
Author: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAH2-WznJt9CMM9KJTMjJh_zbL5hD9oX44qdJ4aqZtjFi-zA3Tg@mail.gmail.com
We check that the ICU locale is only specified if the ICU locale
provider is selected. But we did that too early. We need to wait
until we load the settings of the template database, since that could
also set what the locale provider is.
Reported-by: Marina Polyakova <m.polyakova@postgrespro.ru>
Discussion: https://www.postgresql.org/message-id/9ba4cd1ea6ed6b7b15c0ff15e6f540cd@postgrespro.ru
For publication schemas (OBJECT_PUBLICATION_NAMESPACE) and user
mappings (OBJECT_USER_MAPPING), pg_get_object_address() checked the
array length of the second argument, but not of the first argument.
If the first argument was too long, it would just silently ignore
everything but the first argument. Fix that by checking the length of
the first argument as well.
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/caaef70b-a874-1088-92ef-5ac38269c33b%40enterprisedb.com
Previously the following snprintf() wrappers:
* ReplicationSlotNameForTablesync()
* ReplicationOriginNameForTablesync()
... used int as a second argument of snprintf() while the actual type of it
is size_t. Although it doesn't fail at present better replace it with Size
for consistency with the rest of the system.
Author: Aleksander Alekseev
Reviewed-By: Peter Smith
Discussion: https://postgr.es/m/CAHut%2BPsa8hhfSE6ozUK-ih7GkQziAVAf4f3bqiXEj2nQiu-43g%40mail.gmail.com
Visual Studio 2015+ has support for a macro to control the alignement of
structures as of __declspec(align(#)), and this commit adds a definition
of pg_attribute_aligned() based on that. It happens that this was
already used in the implementation of atomics for MSVC. Note that there
is still no definition fo pg_attribute_packed(), so this does not impact
itemptr.h.
Author: James Coleman
Discussion: https://postgr.es/m/CAAaqYe-HbtZvR3msoMtk+hYW2S0e0OapzMW8icSMYTMA+mN8Aw@mail.gmail.com
expression_tree_walker and allied functions have traditionally
declared their callback functions as, say, "bool (*walker) ()"
to allow for variation in the declared types of the callback
functions' context argument. This is apparently going to be
forbidden by the next version of the C standard, and the latest
version of clang warns about that. In any case it's always
been pretty poor for error-detection purposes, so fixing it is
a good thing to do.
What we want to do is change the callback argument declarations to
be like "bool (*walker) (Node *node, void *context)", which is
correct so far as expression_tree_walker and friends are concerned,
but not change the actual callback functions. Strict compliance with
the C standard would require changing them to declare their arguments
as "void *context" and then cast to the appropriate context struct
type internally. That'd be very invasive and it would also introduce
a bunch of opportunities for future bugs, since we'd no longer have
any check that the correct sort of context object is passed by outside
callers or internal recursion cases. Therefore, we're just going
to ignore the standard's position that "void *" isn't necessarily
compatible with struct pointers. No machine built in the last forty
or so years actually behaves that way, so it's not worth introducing
bug hazards for compatibility with long-dead hardware.
Therefore, to silence these compiler warnings, introduce a layer of
macro wrappers that cast the supplied function name to the official
argument type. Thanks to our use of -Wcast-function-type, this will
still produce a warning if the supplied function is seriously
incompatible with the required signature, without going as far as
the official spec restriction does.
This method fixes the problem without any need for source code changes
outside nodeFuncs.h/.c. However, it is an ABI break because the
physically called functions now have names ending in "_impl". Hence
we can only fix it this way in HEAD. In the back branches, we'll have
to settle for disabling -Wdeprecated-non-prototype.
Discussion: https://postgr.es/m/CA+hUKGKpHPDTv67Y+s6yiC8KH5OXeDg6a-twWo_xznKTcG0kSA@mail.gmail.com
Fix selfuncs.h cpluspluscheck complaint, without reintroducing a
parameter name inconsistency (restore the original declaration names,
and then make corresponding function definitions consistent with that).
Oversight in commit a601366a.
Author: Peter Geoghegan <pg@bowt.ie>
Reported-By: Andres Freund <andres@anarazel.de>
Make sure that function declarations use names that exactly match the
corresponding names from function definitions in optimizer, parser,
utility, libpq, and "commands" code, as well as in remaining library
code. Do the same for all code related to frontend programs (with the
exception of pg_dump/pg_dumpall related code).
Like other recent commits that cleaned up function parameter names, this
commit was written with help from clang-tidy. Later commits will handle
ecpg and pg_dump/pg_dumpall.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/CAH2-WznJt9CMM9KJTMjJh_zbL5hD9oX44qdJ4aqZtjFi-zA3Tg@mail.gmail.com
To avoid duplicating the PG_TEST_EXTRA logic in Makefiles into the upcoming
meson based build definition, move the checks into the the tests
themselves. That also has the advantage of making skipped tests visible.
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/7dae5979-c6c0-cec5-7a36-76a85aa8053d@enterprisedb.com
The original `trap` lines in these scripts are incomplete: in case of
any signal, they delete the working directory but let the script run to
completion, which is useless because it will only proceed to complain
about the working directory being removed. Add `exit` there, with the
original exit value (not rm's).
Since this is mostly just cosmetic, no backpatch.
Discussion: https://postgr.es/m/20220913181002.hzsosy7qkemb7ky7@alvherre.pgsql
clang 15+ will issue a set-but-not-used warning when the only
use of a variable is in autoincrements (e.g., "foo++;").
That's perfectly sensible, but it detects a few more cases that
we'd not noticed before. Silence the warnings with our usual
methods, such as PG_USED_FOR_ASSERTS_ONLY, or in one case by
actually removing a useless variable.
One thing that we can't nicely get rid of is that with %pure-parser,
Bison emits "yynerrs" as a local variable that falls foul of this
warning. To silence those, I inserted "(void) yynerrs;" in the
top-level productions of affected grammars.
Per recently-established project policy, this is a candidate
for back-patching into out-of-support branches: it suppresses
annoying compiler warnings but changes no behavior. Hence,
back-patch to 9.5, which is as far as these patches go without
issues. (A preliminary check shows that the prior branches
need some other set-but-not-used cleanups too, so I'll leave
them for another day.)
Discussion: https://postgr.es/m/514615.1663615243@sss.pgh.pa.us
Make sure that function declarations use names that exactly match the
corresponding names from function definitions in storage, catalog,
access method, executor, and logical replication code, as well as in
miscellaneous utility/library code.
Like other recent commits that cleaned up function parameter names, this
commit was written with help from clang-tidy. Later commits will do the
same for other parts of the codebase.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/CAH2-WznJt9CMM9KJTMjJh_zbL5hD9oX44qdJ4aqZtjFi-zA3Tg@mail.gmail.com
The motivation for this is twofold. For one the meson patchset would like to
have more control over the logfiles. For another, the log file location for
tap tests (tmp_check/log) is not symmetric to the log location for
pg_regress/isolation tests (log/).
This commit does not change the default location for log files for tap tests,
as that'd break the buildfarm log collection, it just provides the
infrastructure for doing so.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/1131990.1660661896@sss.pgh.pa.us
Discussion: https://postgr.es/m/20220828170806.GN2342@telsasoft.com
This is motivated by the meson patchset, which wants to put the log / data for
tests in a different place than the autoconf build. Right now log files for
tap tests have to be inside $TESTDIR/tmp_check, whereas log files for
pg_regress/isolationtester are outside of tmp_check. This change doesn't fix
the latter, but is a prerequisite.
The only test that needs adjustment is 010_tab_completion.pl, as it hardcoded
the tmp_check/ directory. Instead create a dedicated directory for the test
files. It's also a bit cleaner independently, because it doesn't intermingle
the test files with more important things like the log/ directory.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/1131990.1660661896@sss.pgh.pa.us
Discussion: https://postgr.es/m/d861493c-ed20-c251-7a89-7924f5197341@enterprisedb.com
Make sure that function declarations use names that exactly match the
corresponding names from function definitions. Having parameter names
that are reliably consistent in this way will make it easier to reason
about groups of related C functions from the same translation unit as a
module. It will also make certain refactoring tasks easier.
Like other recent commits that cleaned up function parameter names, this
commit was written with help from clang-tidy. Later commits will do the
same for other parts of the codebase.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/CAH2-WznJt9CMM9KJTMjJh_zbL5hD9oX44qdJ4aqZtjFi-zA3Tg@mail.gmail.com
Adjust a handful of remaining function prototypes that were overlooked
by recent commit bc2187ed. This oversight wasn't caught by clang-tidy
because the functions in question are only built in custom REG_DEBUG
builds.
Author: Peter Geoghegan <pg@bowt.ie>
Reported-By: Tom Lane <tgl@sss.pgh.pa.us>
The main issue with using gendef.pl as-is for meson is that with meson the
filenames are a bit longer, exceeding the max commandline length when calling
dumpbin with all objects. As it's easier to pass in a library anyway, do so.
The .def file location, input and temporary file location need to be tunable
as well.
This also fixes a bug in gendef.pl: The logic when to regenerate was broken
and never avoid regenerating.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/20220809071055.rgikv3qn74ypnnbb@awork3.anarazel.de
Discussion: https://postgr.es/m/7dae5979-c6c0-cec5-7a36-76a85aa8053d@enterprisedb.com
Make our copy of the IANA timezone library use named parameters in
function declarations. Also make sure that parameter names from each
function's declaration match corresponding definition parameter names.
This makes the timezone code follow Postgres coding standards. The
value of having a consistent standard everywhere seems to outweigh the
cost of keeping the function declarations in sync with future IANA
releases.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/CAH2-WznJt9CMM9KJTMjJh_zbL5hD9oX44qdJ4aqZtjFi-zA3Tg@mail.gmail.com
Make regex code consistently use named parameters in function
declarations. Also make sure that parameter names from each function's
declaration match corresponding definition parameter names.
This makes Henry Spencer's regex code follow Postgres coding standards.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/CAH2-WznJt9CMM9KJTMjJh_zbL5hD9oX44qdJ4aqZtjFi-zA3Tg@mail.gmail.com
The header comment for get_cheapest_group_keys_order() claimed that the
output arguments were set to a newly allocated list which may be freed by
the calling function, however, this was not always true as the function
would simply leave these arguments untouched in some cases.
This tripped me up when working on 1349d2790 as I mistakenly assumed I
could perform a list_concat with the output parameters. That turned out
bad due to list_concat modifying the original input lists.
In passing, make it more clear that the number of distinct values is
important to reduce tiebreaks during sorts. Also, explain what the
n_preordered parameter means.
Backpatch-through: 15, where get_cheapest_group_keys_order was introduced.
If role A is a direct or indirect member of role B but does not inherit
B's privileges (because at least one relevant grant was created WITH
INHERIT FALSE) then A should not be permitted to bypass privilege
checks that require the privileges of B. For example, A can't change
the privileges of objects owned by B, nor can A drop those objects.
However, up until now, it's been possible for A to change default
privileges for role B. That doesn't seem to be correct, because a
non-inherited role grant is only supposed to permit you to assume
the identity of the granted role via SET ROLE, and should not
otherwise permit you to exercise the privileges of that role. Most
places followed that rule, but this case was an exception.
This could be construed as a security vulnerability, but it does not
seem entirely clear cut, since older branches were fuzzy about the
distinction between is_member_of_role() and has_privs_of_role() in
a number of other ways as well. Because of this, and because
user-visible behavior changes in minor releases are to be avoided
whenever possible, no back-patch.
Discussion: http://postgr.es/m/CA+TgmobG_YUP06R_PM_2Z7wR0qv_52gQPHD8CYXbJva0cf0E+A@mail.gmail.com
Normally when we use object-oriented programming techniques, we
provide a pointer to an object and then some way of looking up the
associated table of callbacks, but walmethods.c/h took the alternative
approach of providing only a pointer to the table of callbacks and
thus imposed the artificial restriction that there could only ever be
one object of each type, so that the callbacks could find it via a
global variable. That doesn't seem like the right idea, so revise the
approach.
Each callback which does not already have an argument of type
Walfile * now takes a pointer to the relevant WalWriteMethod *
so that these callbacks need not rely on there being only one
object of each type.
Freeing a WalWriteMethod is now performed via a callback provided
for that purpose rather than requiring the caller to know which
WAL method they want to free.
Discussion: http://postgr.es/m/CA+TgmoZS0Kw98fOoAcGz8B9iDhdqB4Be4e=vDZaJZ5A-xMYBqA@mail.gmail.com
The API contract for planstate_tree_walker() callbacks is that they
take a PlanState pointer and a context pointer. Somebody figured
they could save a couple lines of code by ignoring that, and passing
ExecShutdownNode itself as the walker even though it has but one
argument. Somewhat remarkably, we've gotten away with that so far.
However, it seems clear that the upcoming C2x standard means to
forbid such cases, and compilers that actively break such code
likely won't be far behind. So spend the extra few lines of code
to do it honestly with a separate walker function.
In HEAD, we might as well go further and remove ExecShutdownNode's
useless return value. I left that as-is in back branches though,
to forestall complaints about ABI breakage.
Back-patch, with the thought that this might become of practical
importance before our stable branches are all out of service.
It doesn't seem to be fixing any live bug on any currently known
platform, however.
Discussion: https://postgr.es/m/208054.1663534665@sss.pgh.pa.us
This makes the curent file position and pathname visible in a generic
way, so we no longer need current_walfile_name global variable or the
get_current_pos() method. Since that purported to be able to fail but
never actually did, this also lets us get rid of some unnecessary
error-handling code.
One risk of this change is that the get_current_pos() method
previously cleared the error indicator, and that will no longer happen
with the new approach. I looked for a way that this could cause problems
and did not find one.
The previous code was confused about whether "Walfile" was the
implementation-dependent structure representing a WAL file or
whether it was a pointer to that stucture. Some of the code used it
one way, and some in the other. The compiler tolerated that because
void * is interchangeable with void **, but now that Walfile is a
struct, it's necessary to be consistent. Hence, some references to
"Walfile" have been converted to "Walfile *".
Discussion: http://postgr.es/m/CA+TgmoZS0Kw98fOoAcGz8B9iDhdqB4Be4e=vDZaJZ5A-xMYBqA@mail.gmail.com
Since c7aba7c, the transform method used during parse analysis of a
subcripting construct has moved from transformAssignmentSubscripts() to
the per-type transform method (arrays or arbitrary types) the step that
checks for slicing support, but transformAssignmentSubscripts() has kept
traces of it. Removing it simplifies the code, so let's clean up all
that.
Author: Zhang Mingli
Reviewed-by: Richard Guo
Discussion: https://postgr.es/m/0d7041ac-c704-48ad-86fd-e05feddf08ed@Spark
Make reorderbuffer.h function declarations consistently use named
parameters. Also make sure that the declarations use names that match
corresponding names from function definitions in reorderbuffer.c. This
makes the definitions easier to follow, especially in the case of
functions that happen to have adjoining arguments of the same type.
This patch was written with help from clang-tidy. Specifically, its
"readability-inconsistent-declaration-parameter-name" check and its
"readability-named-parameter" check were used.
Author: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/3955318.1663377656@sss.pgh.pa.us
The function has a bool argument named "case_insensitive", but that was
spelled "case_sensitive" in the declaration. Make them consistent now
to avoid confusion in the future.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Michael Paquiër <michael@paquier.xyz>
Discussion: https://postgr.es/m/CAH2-WznJt9CMM9KJTMjJh_zbL5hD9oX44qdJ4aqZtjFi-zA3Tg@mail.gmail.com
Backpatch: 10-
So far they were created below CacheMemoryContext. However, that's not
guaranteed to exist in all situations, leading to memory contexts created as
top-level contexts. There isn't actually a good reason anymore to create them
below CacheMemoryContext, so just creating them below TopMemoryContext seems
the best approach.
Reported-by: Reid Thompson <reid.thompson@crunchydata.com>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Author: "Drouvot, Bertrand" <bdrouvot@amazon.com>
Discussion: https://postgr.es/m/b948b729-42fe-f88c-2f4a-0e65d84c049b@amazon.com
Backpatch: 15-
Since Windows 10 1703, it is additionally necessary to pass a flag
called FILE_MAP_LARGE_PAGES to MapViewOfFile() to enable large pages at
map time. This flag is ignored on older versions of Windows, where
large pages should still be able to work properly without setting it.
Note that the flag would be set only for binaries that knew about it at
compile-time, which should be more or less all the Windows environments
these days.
Since 495ed0e, Windows 10 is the minimum version of Windows supported by
Postgres, making this change easy to reason about on HEAD. Per
discussion, no backpatch is done for the moment.
Reported-by: Okano Naoki
Author: Thomas Munro
Reviewed-by: Tom Lane, Michael Paquier, Julien Rouhaud
Discussion: https://postgr.es/m/17448-0a96583a67edb1f7@postgresql.org
Very occasionally the stats test failed due to the number of sessions not
being updated yet. Likely this requires that there is contention on the
database's stats entry. Solve this by forcing pending stats to be flushed
before fetching the stats.
I verified that there are no other test failures after making
pgstat_report_stat() only flush stats when force = true.
Per message from Tom Lane and buildfarm member crake.
Discussion: https://postgr.es/m/3428246.1663271992@sss.pgh.pa.us
Backpatch: 15-, where 5264add784 added the test
Treat arguments declared as RECORD as if that were a polymorphic type
(which it is, sort of), in that we substitute the actual argument type
while forming the function cache lookup key. This allows the specific
composite type to be known in some cases where it was not before,
at the cost of making a separate function cache entry for each named
composite type that's passed to the function during a session. The
particular symptom discussed in bug #17610 could be solved in other
more-efficient ways, but only at the cost of considerable development
work, and there are other cases where we'd still fail without this.
Per bug #17610 from Martin Jurča. Back-patch to v11 where we first
allowed plpgsql functions to be declared as taking type RECORD.
Discussion: https://postgr.es/m/17610-fb1eef75bf6c2364@postgresql.org
For some reason we'd never decorated pg_v*printf() with
pg_attribute_printf() annotations. There is a convention for
how to label va_list-using printf functions (write zero for the
second argument), and we use that liberally elsewhere in the
code, but these core functions lacked it. It's not clear how
much useful checking the compiler can do for calls of these,
but we might as well add the annotations.
Also, sync win32security.c's log_error() with our normal convention
that pg_attribute_printf must be attached to a function's declaration
not definition. Apparently this file is only compiled with compilers
that aren't picky about that, but still it'd be better to be
consistent.
No back-patch since there's little reason to think we would catch
anything.
Discussion: https://postgr.es/m/3492412.1663283395@sss.pgh.pa.us
If the createdb tests run under the C locale, the database cluster
will be initialized with encoding SQL_ASCII. With the checks added in
c7db01e325, this will cause several
ICU-related tests to fail because SQL_ASCII is not supported by ICU.
To work around that, use initdb option -E UTF8 for those tests to get
past that check.
Check in CREATE DATABASE and initdb that the selected encoding is
supported by ICU. Before, they would pass but users would later get
an error from the server when they tried to use the database.
Also document that initdb sets the encoding to UTF8 by default if the
ICU locale provider is chosen.
Author: Marina Polyakova <m.polyakova@postgrespro.ru>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://www.postgresql.org/message-id/6dd6db0984d86a51b7255ba79f111971@postgrespro.ru
I happened to notice that libpq_pipeline's private implementation
of pg_fatal lacked any pg_attribute_printf decoration. Indeed,
adding that turned up a mistake! We'd likely never have noticed
because the error exits in this code are unlikely to get hit,
but still, it's a bug.
We're so used to having the compiler check this stuff for us that
a printf-like function without pg_attribute_printf is a land mine.
I wonder if there is a way to detect such omissions.
Back-patch to v14 where this code came in.
Commit 31dcfae83 changed one pg_resetwal output string, and a
corresponding test in pg_upgrade, without sufficient thought for
the consequences. We can't change that output without creating
hazards for cross-version upgrades, since pg_upgrade needs to be able
to read the output of several different versions of pg_resetwal.
There may well be external tools with the same requirement.
For the moment, just revert those two changes. What we really
ought to do here is have a separate, stable, easily machine-readable
output format for pg_resetwal and pg_controldata, as proposed
years ago by Alvaro. Once that's in place and tools no longer
need to depend on the exact spelling of the human-readable output,
we can put back this change.
Discussion: https://postgr.es/m/fbea8c6f-415a-bad9-c3de-969c40d08a84@dunslane.net
After commit cc2c7d65fc added this flag,
failure to reset it caused assertion failures. In non-assert builds, it
made the system fail to achieve the objectives listed in that commit;
chiefly, we might emit a spurious log message. Back-patch to v15, where
that commit first appeared.
Bharath Rupireddy and Kyotaro Horiguchi. Reviewed by Dilip Kumar,
Nathan Bossart and Michael Paquier. Reported by Dilip Kumar.
Discussion: https://postgr.es/m/CAFiTN-sE3ry=ycMPVtC+Djw4Fd7gbUGVv_qqw6qfzp=JLvqT3g@mail.gmail.com
Commit ecaf7c5df5 removed gram.h from the backend's generated-headers
target. In LLVM builds, this leads to loss of dependency information
when generating .bc files. To fix, add a rule that mirrors ad-hoc .o
dependencies for .bc files as well.
Per cfbot (no buildfarm failures reported)
Analysis by Tom Lane and Andres Freund
Proposed fix by Andres Freund
Discussion: https://www.postgresql.org/message-id/20220914210427.y26tkagmxo5wwbvp%40awork3.anarazel.de
Referring to the WAL as just "log" invites confusion with the
postmaster log, so avoid doing that in docs and error messages.
Also shorten "WAL segment file" to just "WAL file" in various
places.
Bharath Rupireddy, reviewed by Nathan Bossart and Kyotaro Horiguchi
Discussion: https://postgr.es/m/CALj2ACUeXa8tDPaiTLexBDMZ7hgvaN+RTb957-cn5qwv9zf-MQ@mail.gmail.com
In 29f45e299, we added support for optimizing the execution of NOT
IN(values) by using a hash table instead of a linear search over the
array. That commit neglected to update the header comment for
convert_saop_to_hashed_saop() to mention this fact. Here we fix that.
Author: James Coleman
Discussion: https://postgr.es/m/CAAaqYe99NUpAPcxgchGstgM23fmiGjqQPot8627YgkBgNt=BfA@mail.gmail.com
Backpatch-through: 15, where 29f45e299 was added.
Various bits of code were declaring signal handlers manually,
using "int signum" or variants of that. We evidently have no
platforms where that's actually wrong, but let's use our
SIGNAL_ARGS macro everywhere anyway. If nothing else, it's
good for finding signal handlers easily.
No need for back-patch, since this is just cosmetic AFAICS.
Discussion: https://postgr.es/m/2684964.1663167995@sss.pgh.pa.us
In pg_receivewal, compressed output is only flushed on clean exits. The
reason to support SIGTERM as well as SIGINT (which is currently handled)
is that pg_receivewal might well be running as a daemon, and systemd's
default KillSignal is SIGTERM.
Since pg_recvlogical is also supposed to run as a daemon, teach it about
SIGTERM as well and update the documentation to match. While in there,
change pg_receivewal's time_to_stop to be sig_atomic_t like it is in
pg_recvlogical.
Author: Christoph Berg <myon@debian.org>
Reviewed-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/Yvo/5No5S0c4EFMj@msg.df7cb.de
This appears to be a merge mistake in 96ef3237bf74. We could put it
back the way it was before JSON_TABLE and it'd be two lines shorter, but
it's likely that JSON_TABLE will be back and will prefer things this
way. It makes no other difference in practice.
Backpatch to 15.
Reported by Ranier Vilela
Discussion: https://postgr.es/m/CAEudQAr4nOcNQskC4oBEZN4S+4heJ=1ch_ZKOxU+_Ef-FQSf-g@mail.gmail.com
The zlib documentation mentions the values supported for the compression
strategy, but this code has been using a hardcoded value of 0 rather
than Z_DEFAULT_STRATEGY. This commit adjusts the code to use
Z_DEFAULT_STRATEGY.
Backpatch down to where this code has been added to ease the backport of
any future patch touching this area.
Reported-by: Tom Lane
Discussion: https://postgr.es/m/1400032.1662217889@sss.pgh.pa.us
Backpatch-through: 10
The oldest vendor-shipped Perl in the buildfarm is 5.14.2, which is
the last version that Debian Wheezy shipped. That OS is EOL, but we
keep it running because there is no other convenient way to test certain
non-mainstream 32-bit platforms. There is no bugfix in the 5.14.2 release
that is required, and yet it's also not the latest minor release --
that would be 5.14.4. To clarify the situation, we have thus arranged the
buildfarm to test 5.14.0. That allows configure scripts and documentation
to state 5.14 without fine print.
The MSVC build didn't check the version, since our previous minimum 5.8.3
was considered too old to check for on Windows. We will need a check for
Windows sometime during the v16 cycle, but that could be rendered moot
by the impending Meson conversion, so it seems safe to just document
the requirement for now.
Reviewed by Tom Lane
Discussion: https://www.postgresql.org/message-id/20220902181553.ev4pgzhubhdkguuv@awork3.anarazel.de
This header is semi-private, being used only in files related to
raw parsing, so move to the backend directory where those files
live. This allows removal of Makefile rules that symlink gram.h to
src/include/parser, since gramparse.h can now include gram.h from
within the same directory. This has the side-effect of no longer
installing gram.h and gramparse.h, but there doesn't seem to be a
good reason to continue doing so.
Per suggestion from Andres Freund and Peter Eisentraut
Discussion: https://www.postgresql.org/message-id/20220904181759.px6uosll6zbxcum5%40awork3.anarazel.de
PG_COMPRESSION_OPTION_LEVEL is removed from the compression
specification logic, and instead the compression level is always
assigned with each library's default if nothing is directly given. This
centralizes the checks on the compression methods supported by a given
build, and always assigns a default compression level when parsing a
compression specification. This results in complaining at an earlier
stage than previously if a build supports a compression method or not,
aka when parsing a specification in the backend or the frontend, and not
when processing it. zstd, lz4 and zlib are able to handle in their
respective routines setting up the compression level the case of a
default value, hence the backend or frontend code (pg_receivewal or
pg_basebackup) has now no need to know what the default compression
level should be if nothing is specified: the logic is now done so as the
specification parsing assigns it. It can also be enforced by passing
down a "level" set to the default value, that the backend will accept
(the replication protocol is for example able to handle a command like
BASE_BACKUP (COMPRESSION_DETAIL 'gzip:level=-1')).
This code simplification fixes an issue with pg_basebackup --gzip
introduced by ffd5365, where the tarball of the streamed WAL segments
would be created as of pg_wal.tar.gz with uncompressed contents, while
the intention is to compress the segments with gzip at a default level.
The origin of the confusion comes from the handling of the default
compression level of gzip (-1 or Z_DEFAULT_COMPRESSION) and the value of
0 was getting assigned, which is what walmethods.c would consider
as equivalent to no compression when streaming WAL segments with its tar
methods. Assigning always the compression level removes the confusion
of some code paths considering a value of 0 set in a specification as
either no compression or a default compression level.
Note that 010_pg_basebackup.pl has to be adjusted to skip a few tests
where the shape of the compression detail string for client and
server-side compression was checked using gzip. This is a result of the
code simplification, as gzip specifications cannot be used if a build
does not support it.
Reported-by: Tom Lane
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/1400032.1662217889@sss.pgh.pa.us
Backpatch-through: 15
guc.c has grown to be one of our largest .c files, making it
a bottleneck for compilation. It's also acquired a bunch of
knowledge that'd be better kept elsewhere, because of our not
very good habit of putting variable-specific check hooks here.
Hence, split it up along these lines:
* guc.c itself retains just the core GUC housekeeping mechanisms.
* New file guc_funcs.c contains the SET/SHOW interfaces and some
SQL-accessible functions for GUC manipulation.
* New file guc_tables.c contains the data arrays that define the
built-in GUC variables, along with some already-exported constant
tables.
* GUC check/assign/show hook functions are moved to the variable's
home module, whenever that's clearly identifiable. A few hard-
to-classify hooks ended up in commands/variable.c, which was
already a home for miscellaneous GUC hook functions.
To avoid cluttering a lot more header files with #include "guc.h",
I also invented a new header file utils/guc_hooks.h and put all
the GUC hook functions' declarations there, regardless of their
originating module. That allowed removal of #include "guc.h"
from some existing headers. The fallout from that (hopefully
all caught here) demonstrates clearly why such inclusions are
best minimized: there are a lot of files that, for example,
were getting array.h at two or more levels of remove, despite
not having any connection at all to GUCs in themselves.
There is some very minor code beautification here, such as
renaming a couple of inconsistently-named hook functions
and improving some comments. But mostly this just moves
code from point A to point B and deals with the ensuing
needs for #include adjustments and exporting a few functions
that previously weren't exported.
Patch by me, per a suggestion from Andres Freund; thanks also
to Michael Paquier for the idea to invent guc_funcs.c.
Discussion: https://postgr.es/m/587607.1662836699@sss.pgh.pa.us
Commit 3a0e385048 introduced a new path for unauthenticated bytes from
the client certificate to be printed unescaped to the logs. There are a
handful of these already, but it doesn't make sense to keep making the
problem worse. \x-escape any unprintable bytes.
The test case introduces a revoked UTF-8 certificate. This requires the
addition of the `-utf8` flag to `openssl req`. Since the existing
certificates all use an ASCII subset, this won't modify the existing
certificates' subjects if/when they get regenerated; this was verified
experimentally with
$ make sslfiles-clean
$ make sslfiles
Unfortunately the test can't be run in the CI yet due to a test timing
issue; see 55828a6b60.
Author: Jacob Champion <jchampion@timescale.com>
Discussion: https://www.postgresql.org/message-id/CAAWbhmgsvHrH9wLU2kYc3pOi1KSenHSLAHBbCVmmddW6-mc_=w@mail.gmail.com
Locale options can be specified for initdb, createdb, and CREATE
DATABASE. In initdb, it has always been possible to specify --locale
and then some --lc-* option to override a category. CREATE DATABASE
and createdb didn't allow that, requiring either the all-categories
option or only per-category options. In
f2553d4306, this was changed in CREATE
DATABASE (perhaps by accident?) to be more like the initdb behavior,
but createdb still had the old behavior.
Now we change createdb to match the behavior of CREATE DATABASE and
initdb, and also update the documentation of CREATE DATABASE to match
the new behavior, which was not done in the above commit.
Author: Marina Polyakova <m.polyakova@postgrespro.ru>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://www.postgresql.org/message-id/7c99c132dc9c0ac630e0127f032ac480@postgrespro.ru
The two strings are already a single palloc'd chunk, not freed; there's
no reason to allocate separate copies that have the same lifetime.
This code is only called in short-lived memory contexts (except in some
cases in TopTransactionContext, which is still short-lived enough not to
really matter), and typically only for short arrays, so the memory or
computation saved is likely negligible. However, let's fix it to avoid
leaving a bad example of code to copy. This is the only place I could
find where we're doing this with makeDefElem().
Reported-by: Junwang Zhao <zhjwpku@gmail.com>
Discussion: https://postgr.es/m/20220909142050.3vv2hjekppk265dd@alvherre.pgsql
Commit d8594d123 updated the list of non-spacing codepoints used
for calculating display width, but in doing so inadvertently removed
some, since the script used for that commit only considered combining
characters.
For complete coverage for zero-width characters, include codepoints in
the category Cf (Format). To reflect the wider purpose, also rename files
and update comments that referred specifically to combining characters.
Some of these ranges have been missing since v12, but due to lack of
field complaints it was determined not important enough to justify adding
special-case logic the backbranches.
Kyotaro Horiguchi
Report by Pavel Stehule
Discussion: https://www.postgresql.org/message-id/flat/CAFj8pRBE8yvpQ0FSkPCoe0Ny1jAAsAQ6j3qMgVwWvkqAoaaNmQ%40mail.gmail.com
This change concerns a couple of .txt files (for internal state checks)
that were still written in the path where the binary is executed, and
not in the subdirectory located in the target cluster. Like the other
.txt files doing already so (like loadable_libraries.txt), these are
saved in the base output directory. Note that on failure, the logs
report the full path to the .txt file generated, so these are easy to
find.
Oversight in 38bfae3.
Author: Daniel Gustafsson
Reviewed-by: Michael Paquier, Justin Prysby
Discussion: https://postgr.es/m/181A6DA8-3B7F-4B71-82D5-363FF0146820@yesql.se
Backpatch-through: 15
The primary fix here is to fix has_matching_range() so it does not
reference ranges->values[-1] when nranges == 0. Similar problems existed
in AssertCheckRanges() too. It does not look like any of these problems
could lead to a crash as the array in question is at the end of the Ranges
struct, and values[-1] is memory that belongs to other fields in the
struct. However, let's get rid of these rather unsafe coding practices.
In passing, I (David) adjusted some comments to try to make it more clear
what some of the fields are for in the Ranges struct. I had to study the
code to find out what nsorted was for as I couldn't tell from the
comments.
Author: Ranier Vilela
Discussion: https://postgr.es/m/CAEudQAqJQzPitufX-jR=YUbJafpCDAKUnwgdbX_MzSc93wuvdw@mail.gmail.com
Backpatch-through: 14, where multi-range brin was added.
Commit c4c340088 changed geometric operators to use float4 and float8
functions, and handle NaN's in a better way. The circle sameness test
had a typo in the code which resulted in all comparisons with the left
circle having a NaN radius considered same.
postgres=# select '<(0,0),NaN>'::circle ~= '<(0,0),1>'::circle;
?column?
----------
t
(1 row)
This fixes the sameness test to consider the radius of both the left
and right circle.
Backpatch to v12 where this was introduced.
Author: Ranier Vilela <ranier.vf@gmail.com>
Discussion: https://postgr.es/m/CAEudQAo8dK=yctg2ZzjJuzV4zgOPBxRU5+Kb+yatFiddtQk6Rw@mail.gmail.com
Backpatch-through: v12
In commit f6c5edb8ab, we started to drop the replication origin slots
before tablesync worker exits to avoid consuming more slots than required.
We were dropping the replication origin in the same transaction where we
were marking the tablesync state as SYNCDONE. Now, if there is any error
after we have dropped the origin but before we commit the containing
transaction, the in-memory state of replication progress won't be rolled
back. Due to this, after the restart, tablesync worker can start streaming
from the wrong location and can apply the already processed transaction.
To fix this, we need to opportunistically drop the origin after marking
the tablesync state as SYNCDONE. Even, if the tablesync worker fails to
remove the replication origin before exit, the apply worker ensures to
clean it up afterward.
Reported by Tom Lane as per buildfarm.
Diagnosed-by: Masahiko Sawada
Author: Hou Zhijie
Reviewed-By: Masahiko Sawada, Amit Kapila
Discussion: https://postgr.es/m/20220714115155.GA5439@depesz.com
Discussion: https://postgr.es/m/CAD21AoAw0Oofi4kiDpJBOwpYyBBBkJj=sLUOn4Gd2GjUAKG-fw@mail.gmail.com
This adds additional variants of palloc, pg_malloc, etc. that
encapsulate common usage patterns and provide more type safety.
Specifically, this adds palloc_object(), palloc_array(), and
repalloc_array(), which take the type name of the object to be
allocated as its first argument and cast the return as a pointer to
that type. There are also palloc0_object() and palloc0_array()
variants for initializing with zero, and pg_malloc_*() variants of all
of the above.
Inspired by the talloc library.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/bb755632-2a43-d523-36f8-a1e7a389a907@enterprisedb.com
This change impacts the backend-side code in charge of starting a LDAP
TLS session. It is a bit sad that it is not possible to unify the WIN32
and non-WIN32 code paths, but the different number of arguments for both
discard this possibility.
This is similar to 47bd0b3, where this replaces the last function
loading that seems worth it, any others being either environment or
version-dependent.
Reported-by: Thomas Munro
Reviewed-by: Thomas Munro
Discussion: https://postgr.es/m/Yx0rxpNgDh8tN4XA@paquier.xyz
The LDAP wiki states that the search message should be freed regardless
of the return value of ldap_search_s(), but we failed to do so in one
backend code path when searching LDAP with a filter. This is not
critical in an authentication code path failing in the backend as this
causes such the process to exit promptly, but let's be clean and free
the search message appropriately, as documented by upstream.
All the other code paths failing a LDAP operation do that already, and
somebody looking at this code in the future may miss what LDAP expects
with the search message.
Author: Zhihong Yu
Discussion: https://postgr.es/m/CALNJ-vTf5Y+8RtzZ4GjOGE9qWVHZ8awfhnFYc_qGm8fMLUNRAg@mail.gmail.com
When building a shared library with exports.txt there's no need to build an
intermediary static library, we can just pass -Wl,-bE:... when generating the
.so.
When building a shared library without exports.txt, there's no need to call
mkldexport.sh to export all symbols, because all symbols are exported anyway,
and we don't need the export file on the import side (like we do for
postgres.imp).
This makes building .so's on aix a lot more similar to building on other
platforms. In particular, we don't create and remove a .a of the same name but
different contents anymore.
Discussion: https://postgr.es/m/20220820174213.d574qde4ptwdzoqz@awork3.anarazel.de
The ECPG preprocessor converted code such as
static varchar str1[10], str2[20], str3[30];
into
static struct varchar_1 { int len; char arr[ 10 ]; } str1 ;
struct varchar_2 { int len; char arr[ 20 ]; } str2 ;
struct varchar_3 { int len; char arr[ 30 ]; } str3 ;
thus losing the storage attribute for the later variables.
Repeat the declaration for each such variable.
(Note that this occurred only for variables declared "varchar"
or "bytea", which may help explain how it escaped detection
for so long.)
Andrey Sokolov
Discussion: https://postgr.es/m/942241662288242@mail.yandex.ru
Because of inadequate filtering, the check triggers were confusing the
search for action triggers in GetForeignKeyActionTriggers and vice-versa
in GetForeignKeyCheckTriggers; this confusion results in seemingly
random assertion failures, and can have real impact in non-asserting
builds depending on catalog order. Change these functions so that they
correctly ignore triggers that are not relevant to each side.
To reduce the odds of further problems, do not break out of the
searching loop in assertion builds. This break is likely to hide bugs;
without it, we would have detected this bug immediately.
This problem was introduced by f4566345cf, so backpatch to 15 where
that commit first appeared.
Author: Amit Langote <amitlangote09@gmail.com>
Discussion: https://postgr.es/m/20220908172029.sejft2ppckbo6oh5@awork3.anarazel.de
Discussion: https://postgr.es/m/4104619.1662663056@sss.pgh.pa.us
Since the retirement of some older buildfarm members, the oldest Bison
that gets regular testing is 2.3. MacOS ships that version, and will
continue doing so for the forseeable future because of Apple's policy
regarding GPLv3. While Mac users could use a package manager to install
a newer version, there is no compelling reason to force them do so at
this time.
Reviewed by Andres Freund
Discussion: https://www.postgresql.org/message-id/1097762.1662145681@sss.pgh.pa.us
