Split ProcSleep into two functions: JoinWaitQueue and ProcSleep.
JoinWaitQueue is called while holding the partition lock, and inserts
the current process to the wait queue, while ProcSleep() does the
actual sleeping. ProcSleep() is now called without holding the
partition lock, and it no longer re-acquires the partition lock before
returning. That makes the wakeup a little cheaper. Once upon a time,
re-acquiring the partition lock was needed to prevent a signal handler
from longjmping out at a bad time, but these days our signal handlers
just set flags, and longjmping can only happen at points where we
explicitly run CHECK_FOR_INTERRUPTS().
If JoinWaitQueue detects an "early deadlock" before even joining the
wait queue, it returns without changing the shared lock entry, leaving
the cleanup of the shared lock entry to the caller. This makes the
handling of an early deadlock the same as the dontWait=true case.
One small user-visible side-effect of this refactoring is that we now
only set the 'ps' title to say "waiting" when we actually enter the
sleep, not when the lock is skipped because dontWait=true, or when a
deadlock is detected early before entering the sleep.
This eliminates the 'lockAwaited' global variable in proc.c, which was
largely redundant with 'awaitedLock' in lock.c
Note: Updating the local lock table is now the caller's responsibility.
JoinWaitQueue and ProcSleep are now only responsible for modifying the
shared state. Seems a little nicer that way.
Based on Thomas Munro's earlier patch and observation that ProcSleep
doesn't really need to re-acquire the partition lock.
Reviewed-by: Maxim Orlov
Discussion: https://www.postgresql.org/message-id/7c2090cd-a72a-4e34-afaa-6dd2ef31440e@iki.fi
Previously, ProcSleep()'s caller was responsible for setting
MyProc->heldLocks, and we had comments to remind about that. But it
seems simpler to make ProcSleep() itself responsible for it.
ProcSleep() already set the other info about the lock its waiting for
(waitLock, waitProcLock and waitLockMode), so it is natural for it to
set heldLocks too.
Reviewed-by: Maxim Orlov
Discussion: https://www.postgresql.org/message-id/7c2090cd-a72a-4e34-afaa-6dd2ef31440e@iki.fi
3c5db1d6b implemented the pg_wal_replay_wait() stored procedure. Due to
the patch development history, the implementation resided in
src/backend/commands/waitlsn.c (src/include/commands/waitlsn.h for headers).
014f9f34d moved pg_wal_replay_wait() itself to
src/backend/access/transam/xlogfuncs.c near to the WAL-manipulation functions.
But most of the implementation stayed in place.
The code in src/backend/commands/waitlsn.c has nothing to do with commands,
but is related to WAL. So, this commit moves this code into
src/backend/access/transam/xlogwait.c (src/include/access/xlogwait.h for
headers).
Reported-by: Peter Eisentraut
Discussion: https://postgr.es/m/18c0fa64-0475-415e-a1bd-665d922c5201%40eisentraut.org
Reviewed-by: Pavel Borisov
This seems nicer than having to duplicate the logic between
InitProcess() and ProcKill() for which child processes have a
PMChildFlags slot.
Move the MarkPostmasterChildActive() call earlier in InitProcess(),
out of the section protected by the spinlock.
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://www.postgresql.org/message-id/a102f15f-eac4-4ff2-af02-f9ff209ec66f@iki.fi
Commit c4d5cb71d2 introduced a couple asserts in the fast-path locking
code, upsetting Coverity.
The assert in InitProcGlobal() is clearly wrong, as it assigns instead
of checking the value. This is harmless, but doesn't check anything.
The asserts in FAST_PATH_ macros are written as if for signed values,
but the macros are only called for unsigned ones. That makes the check
for (val >= 0) useless. Checks written as ((uint32) x < max) work for
both signed and unsigned values. Negative values should wrap to values
greater than INT32_MAX.
Per Coverity, report by Tom Lane.
Reported-by: Tom Lane
Discussion: https://postgr.es/m/2891628.1727019959@sss.pgh.pa.us
Replace the fixed-size array of fast-path locks with arrays, sized on
startup based on max_locks_per_transaction. This allows using fast-path
locking for workloads that need more locks.
The fast-path locking introduced in 9.2 allowed each backend to acquire
a small number (16) of weak relation locks cheaply. If a backend needs
to hold more locks, it has to insert them into the shared lock table.
This is considerably more expensive, and may be subject to contention
(especially on many-core systems).
The limit of 16 fast-path locks was always rather low, because we have
to lock all relations - not just tables, but also indexes, views, etc.
For planning we need to lock all relations that might be used in the
plan, not just those that actually get used in the final plan. So even
with rather simple queries and schemas, we often need significantly more
than 16 locks.
As partitioning gets used more widely, and the number of partitions
increases, this limit is trivial to hit. Complex queries may easily use
hundreds or even thousands of locks. For workloads doing a lot of I/O
this is not noticeable, but for workloads accessing only data in RAM,
the access to the shared lock table may be a serious issue.
This commit removes the hard-coded limit of the number of fast-path
locks. Instead, the size of the fast-path arrays is calculated at
startup, and can be set much higher than the original 16-lock limit.
The overall fast-path locking protocol remains unchanged.
The variable-sized fast-path arrays can no longer be part of PGPROC, but
are allocated as a separate chunk of shared memory and then references
from the PGPROC entries.
The fast-path slots are organized as a 16-way set associative cache. You
can imagine it as a hash table of 16-slot "groups". Each relation is
mapped to exactly one group using hash(relid), and the group is then
processed using linear search, just like the original fast-path cache.
With only 16 entries this is cheap, with good locality.
Treating this as a simple hash table with open addressing would not be
efficient, especially once the hash table gets almost full. The usual
remedy is to grow the table, but we can't do that here easily. The
access would also be more random, with worse locality.
The fast-path arrays are sized using the max_locks_per_transaction GUC.
We try to have enough capacity for the number of locks specified in the
GUC, using the traditional 2^n formula, with an upper limit of 1024 lock
groups (i.e. 16k locks). The default value of max_locks_per_transaction
is 64, which means those instances will have 64 fast-path slots.
The main purpose of the max_locks_per_transaction GUC is to size the
shared lock table. It is often set to the "average" number of locks
needed by backends, with some backends using significantly more locks.
This should not be a major issue, however. Some backens may have to
insert locks into the shared lock table, but there can't be too many of
them, limiting the contention.
The only solution is to increase the GUC, even if the shared lock table
already has sufficient capacity. That is not free, especially in terms
of memory usage (the shared lock table entries are fairly large). It
should only happen on machines with plenty of memory, though.
In the future we may consider a separate GUC for the number of fast-path
slots, but let's try without one first.
Reviewed-by: Robert Haas, Jakub Wartak
Discussion: https://postgr.es/m/510b887e-c0ce-4a0c-a17a-2c6abb8d9a5c@enterprisedb.com
pg_wal_replay_wait() is to be used on standby and specifies waiting for
the specific WAL location to be replayed. This option is useful when
the user makes some data changes on primary and needs a guarantee to see
these changes are on standby.
The queue of waiters is stored in the shared memory as an LSN-ordered pairing
heap, where the waiter with the nearest LSN stays on the top. During
the replay of WAL, waiters whose LSNs have already been replayed are deleted
from the shared memory pairing heap and woken up by setting their latches.
pg_wal_replay_wait() needs to wait without any snapshot held. Otherwise,
the snapshot could prevent the replay of WAL records, implying a kind of
self-deadlock. This is why it is only possible to implement
pg_wal_replay_wait() as a procedure working without an active snapshot,
not a function.
Catversion is bumped.
Discussion: https://postgr.es/m/eb12f9b03851bb2583adab5df9579b4b%40postgrespro.ru
Author: Kartyshov Ivan, Alexander Korotkov
Reviewed-by: Michael Paquier, Peter Eisentraut, Dilip Kumar, Amit Kapila
Reviewed-by: Alexander Lakhin, Bharath Rupireddy, Euler Taveira
Reviewed-by: Heikki Linnakangas, Kyotaro Horiguchi
Since commit 5764f611e1, we've been using the ilist.h functions for
handling the linked list. There's no need for 'links' to be the first
element of the struct anymore, except for one call in InitProcess
where we used a straight cast from the 'dlist_node *' to PGPROC *,
without the dlist_container() macro. That was just an oversight in
commit 5764f611e1, fix it.
There no imminent need to move 'links' from being the first field, but
let's be tidy.
Reviewed-by: Aleksander Alekseev, Andres Freund
Discussion: https://www.postgresql.org/message-id/22aa749e-cc1a-424a-b455-21325473a794@iki.fi
After further review, we want to move in the direction of always
quoting GUC names in error messages, rather than the previous (PG16)
wildly mixed practice or the intermittent (mid-PG17) idea of doing
this depending on how possibly confusing the GUC name is.
This commit applies appropriate quotes to (almost?) all mentions of
GUC names in error messages. It partially supersedes a243569bf6 and
8d9978a717, which had moved things a bit in the opposite direction
but which then were abandoned in a partial state.
Author: Peter Smith <smithpb2250@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/CAHut%2BPv-kSN8SkxSdoHano_wPubqcg5789ejhCDZAcLFceBR-w%40mail.gmail.com
This fixes various typos, duplicated words, and tiny bits of whitespace
mainly in code comments but also in docs.
Author: Daniel Gustafsson <daniel@yesql.se>
Author: Heikki Linnakangas <hlinnaka@iki.fi>
Author: Alexander Lakhin <exclusion@gmail.com>
Author: David Rowley <dgrowleyml@gmail.com>
Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://postgr.es/m/3F577953-A29E-4722-98AD-2DA9EFF2CBB8@yesql.se
pg_wal_replay_wait() is to be used on standby and specifies waiting for
the specific WAL location to be replayed before starting the transaction.
This option is useful when the user makes some data changes on primary and
needs a guarantee to see these changes on standby.
The queue of waiters is stored in the shared memory array sorted by LSN.
During replay of WAL waiters whose LSNs are already replayed are deleted from
the shared memory array and woken up by setting of their latches.
pg_wal_replay_wait() needs to wait without any snapshot held. Otherwise,
the snapshot could prevent the replay of WAL records implying a kind of
self-deadlock. This is why it is only possible to implement
pg_wal_replay_wait() as a procedure working in a non-atomic context,
not a function.
Catversion is bumped.
Discussion: https://postgr.es/m/eb12f9b03851bb2583adab5df9579b4b%40postgrespro.ru
Author: Kartyshov Ivan, Alexander Korotkov
Reviewed-by: Michael Paquier, Peter Eisentraut, Dilip Kumar, Amit Kapila
Reviewed-by: Alexander Lakhin, Bharath Rupireddy, Euler Taveira
We don't determine the position at which a process waiting for a lock
should insert itself into the wait queue until we reach ProcSleep(),
and we may at that point discover that we must insert ourselves ahead
of everyone who wants a conflicting lock, in which case we obtain the
lock immediately. Up until now, a no-wait lock acquisition would fail
in such cases, erroneously claiming that the lock couldn't be obtained
immediately. Fix that by trying ProcSleep even in the no-wait case.
No back-patch for now, because I'm treating this as an improvement to
the existing no-wait feature. It could instead be argued that it's a
bug fix, on the theory that there should never be any case whatsoever
where no-wait fails to obtain a lock that would have been obtained
immediately without no-wait, but I'm reluctant to interpret the
semantics of no-wait that strictly.
Robert Haas and Jingxian Li
Discussion: http://postgr.es/m/CA+TgmobCH-kMXGVpb0BB-iNMdtcNkTvcZ4JBxDJows3kYM+GDg@mail.gmail.com
as determined by include-what-you-use (IWYU)
While IWYU also suggests to *add* a bunch of #include's (which is its
main purpose), this patch does not do that. In some cases, a more
specific #include replaces another less specific one.
Some manual adjustments of the automatic result:
- IWYU currently doesn't know about includes that provide global
variable declarations (like -Wmissing-variable-declarations), so
those includes are being kept manually.
- All includes for port(ability) headers are being kept for now, to
play it safe.
- No changes of catalog/pg_foo.h to catalog/pg_foo_d.h, to keep the
patch from exploding in size.
Note that this patch touches just *.c files, so nothing declared in
header files changes in hidden ways.
As a small example, in src/backend/access/transam/rmgr.c, some IWYU
pragma annotations are added to handle a special case there.
Discussion: https://www.postgresql.org/message-id/flat/af837490-6b2f-46df-ba05-37ea6a6653fc%40eisentraut.org
Remove IsBackgroundWorker, IsAutoVacuumLauncherProcess(),
IsAutoVacuumWorkerProcess(), and IsLogicalSlotSyncWorker() in favor of
new Am*Process() macros that use MyBackendType. For consistency with
the existing Am*Process() macros.
Reviewed-by: Andres Freund
Discussion: https://www.postgresql.org/message-id/f3ecd4cb-85ee-4e54-8278-5fabfb3a4ed0@iki.fi
Now that BackendId was just another index into the proc array, it was
redundant with the 0-based proc numbers used in other places. Replace
all usage of backend IDs with proc numbers.
The only place where the term "backend id" remains is in a few pgstat
functions that expose backend IDs at the SQL level. Those IDs are now
in fact 0-based ProcNumbers too, but the documentation still calls
them "backend ids". That term still seems appropriate to describe what
the numbers are, so I let it be.
One user-visible effect is that pg_temp_0 is now a valid temp schema
name, for backend with ProcNumber 0.
Reviewed-by: Andres Freund
Discussion: https://www.postgresql.org/message-id/8171f1aa-496f-46a6-afc3-c46fe7a9b407@iki.fi
Previously, backend ID was an index into the ProcState array, in the
shared cache invalidation manager (sinvaladt.c). The entry in the
ProcState array was reserved at backend startup by scanning the array
for a free entry, and that was also when the backend got its backend
ID. Things become slightly simpler if we redefine backend ID to be the
index into the PGPROC array, and directly use it also as an index to
the ProcState array. This uses a little more memory, as we reserve a
few extra slots in the ProcState array for aux processes that don't
need them, but the simplicity is worth it.
Aux processes now also have a backend ID. This simplifies the
reservation of BackendStatusArray and ProcSignal slots.
You can now convert a backend ID into an index into the PGPROC array
simply by subtracting 1. We still use 0-based "pgprocnos" in various
places, for indexes into the PGPROC array, but the only difference now
is that backend IDs start at 1 while pgprocnos start at 0. (The next
commmit will get rid of the term "backend ID" altogether and make
everything 0-based.)
There is still a 'backendId' field in PGPROC, now part of 'vxid' which
encapsulates the backend ID and local transaction ID together. It's
needed for prepared xacts. For regular backends, the backendId is
always equal to pgprocno + 1, but for prepared xact PGPROC entries,
it's the ID of the original backend that processed the transaction.
Reviewed-by: Andres Freund, Reid Thompson
Discussion: https://www.postgresql.org/message-id/8171f1aa-496f-46a6-afc3-c46fe7a9b407@iki.fi
By enabling slot synchronization, all the failover logical replication
slots on the primary (assuming configurations are appropriate) are
automatically created on the physical standbys and are synced
periodically. The slot sync worker on the standby server pings the primary
server at regular intervals to get the necessary failover logical slots
information and create/update the slots locally. The slots that no longer
require synchronization are automatically dropped by the worker.
The nap time of the worker is tuned according to the activity on the
primary. The slot sync worker waits for some time before the next
synchronization, with the duration varying based on whether any slots were
updated during the last cycle.
A new parameter sync_replication_slots enables or disables this new
process.
On promotion, the slot sync worker is shut down by the startup process to
drop any temporary slots acquired by the slot sync worker and to prevent
the worker from trying to fetch the failover slots.
A functionality to allow logical walsenders to wait for the physical will
be done in a subsequent commit.
Author: Shveta Malik, Hou Zhijie based on design inputs by Masahiko Sawada and Amit Kapila
Reviewed-by: Masahiko Sawada, Bertrand Drouvot, Peter Smith, Dilip Kumar, Ajin Cherian, Nisha Moond, Kuroda Hayato, Amit Kapila
Discussion: https://postgr.es/m/514f6f2f-6833-4539-39f1-96cd1e011f23@enterprisedb.com
This commit adds timeout that is expected to be used as a prevention
of long-running queries. Any session within the transaction will be
terminated after spanning longer than this timeout.
However, this timeout is not applied to prepared transactions.
Only transactions with user connections are affected.
Discussion: https://postgr.es/m/CAAhFRxiQsRs2Eq5kCo9nXE3HTugsAAJdSQSmxncivebAxdmBjQ%40mail.gmail.com
Author: Andrey Borodin <amborodin@acm.org>
Author: Japin Li <japinli@hotmail.com>
Author: Junwang Zhao <zhjwpku@gmail.com>
Reviewed-by: Nikolay Samokhvalov <samokhvalov@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Reviewed-by: bt23nguyent <bt23nguyent@oss.nttdata.com>
Reviewed-by: Yuhang Qiu <iamqyh@gmail.com>
The order of process initialization steps is now more consistent
between !EXEC_BACKEND and EXEC_BACKEND modes. InitProcess() is called
at the same place in either mode. We can now also move the
AttachSharedMemoryStructs() call into InitProcess() itself. This
reduces the number of "#ifdef EXEC_BACKEND" blocks.
Reviewed-by: Tristan Partin, Andres Freund, Alexander Lakhin
Discussion: https://www.postgresql.org/message-id/7a59b073-5b5b-151e-7ed3-8b01ff7ce9ef@iki.fi
For clarity, have separate functions for *creating* the shared memory
and semaphores at postmaster or single-user backend startup, and
for *attaching* to existing shared memory structures in EXEC_BACKEND
case. CreateSharedMemoryAndSemaphores() is now called only at
postmaster startup, and a new AttachSharedMemoryStructs() function is
called at backend startup in EXEC_BACKEND mode.
Reviewed-by: Tristan Partin, Andres Freund
Discussion: https://www.postgresql.org/message-id/7a59b073-5b5b-151e-7ed3-8b01ff7ce9ef@iki.fi
InitAuxiliaryProcess() closely resembles InitProcess(), but it didn't
call InitLWLockAccess(). But because InitLWLockAccess() is a no-op
unless compiled with LWLOCK_STATS, and everything works even if it's
not called, the only consequence was that the stats were not printed
for aux processes.
This was an oversight in commit 1c6821be31, in version 9.5, so it is
missing in all supported branches. But since it only affects
developers using LWLOCK_STATS and no one has complained, no
backpatching.
Discussion: https://www.postgresql.org/message-id/20231130202648.7k6agmuizdilufnv@awork3.anarazel.de
The SIGTERM handler for the startup process immediately calls
proc_exit() for the duration of the restore_command, i.e., a call
to system(). This system() call forks a new process to execute the
shell command, and this child process inherits the parent's signal
handlers. If both the parent and child processes receive SIGTERM,
both will attempt to call proc_exit(). This can end badly. For
example, both processes will try to remove themselves from the
PGPROC shared array.
To fix this problem, this commit adds a check in
StartupProcShutdownHandler() to see whether MyProcPid == getpid().
If they match, this is the parent process, and we can proc_exit()
like before. If they do not match, this is a child process, and we
just emit a message to STDERR (in a signal safe manner) and
_exit(), thereby skipping any problematic exit callbacks.
This commit also adds checks in proc_exit(), ProcKill(), and
AuxiliaryProcKill() that verify they are not being called within
such child processes.
Suggested-by: Andres Freund
Reviewed-by: Thomas Munro, Andres Freund
Discussion: https://postgr.es/m/Y9nGDSgIm83FHcad%40paquier.xyz
Discussion: https://postgr.es/m/20230223231503.GA743455%40nathanxps13
Backpatch-through: 11
This commit reverts the work done by commits 3ba59ccc89 and 72e78d831a.
Those commits were incorrect in asserting that we never acquire any other
heavy-weight lock after acquring page lock other than relation extension
lock. We can acquire a lock on catalogs while doing catalog look up after
acquring page lock.
This won't impact any existing feature but we need to think some other way
to achieve this before parallelizing other write operations or even
improving the parallelism in vacuum (like allowing multiple workers
for an index).
Reported-by: Jaime Casanova
Author: Amit Kapila
Backpatch-through: 13
Discussion: https://postgr.es/m/CAJKUy5jffnRKNvRHKQ0LynRb0RJC-o4P8Ku3x9vGAVLwDBWumQ@mail.gmail.com
Run pgindent, pgperltidy, and reformat-dat-files.
This set of diffs is a bit larger than typical. We've updated to
pg_bsd_indent 2.1.2, which properly indents variable declarations that
have multi-line initialization expressions (the continuation lines are
now indented one tab stop). We've also updated to perltidy version
20230309 and changed some of its settings, which reduces its desire to
add whitespace to lines to make assignments etc. line up. Going
forward, that should make for fewer random-seeming changes to existing
code.
Discussion: https://postgr.es/m/20230428092545.qfb3y5wcu4cm75ur@alvherre.pgsql
This provides a way to reserve connection slots for non-superusers.
The slots reserved via the new GUC are available only to users who
have the new predefined role pg_use_reserved_connections.
superuser_reserved_connections remains as a final reserve in case
reserved_connections has been exhausted.
Patch by Nathan Bossart. Reviewed by Tushar Ahuja and by me.
Discussion: http://postgr.es/m/20230119194601.GA4105788@nathanxps13
Until now LWLockDequeueSelf() sequentially searched the list of waiters to see
if the current proc is still is on the list of waiters, or has already been
removed. In extreme workloads, where the wait lists are very long, this leads
to a quadratic behavior. #backends iterating over a list #backends
long. Additionally, the likelihood of needing to call LWLockDequeueSelf() in
the first place also increases with the increased length of the wait queue, as
it becomes more likely that a lock is released while waiting for the wait list
lock, which is held for longer during lock release.
Due to the exponential back-off in perform_spin_delay() this is surprisingly
hard to detect. We should make that easier, e.g. by adding a wait event around
the pg_usleep() - but that's a separate patch.
The fix is simple - track whether a proc is currently waiting in the wait list
or already removed but waiting to be woken up in PGPROC->lwWaiting.
In some workloads with a lot of clients contending for a small number of
lwlocks (e.g. WALWriteLock), the fix can substantially increase throughput.
As the quadratic behavior arguably is a bug, we might want to decide to
backpatch this fix in the future.
Author: Andres Freund <andres@anarazel.de>
Reviewed-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Discussion: https://postgr.es/m/20221027165914.2hofzp4cvutj6gin@awork3.anarazel.de
Discussion: https://postgr.es/m/CALj2ACXktNbG=K8Xi7PSqbofTZozavhaxjatVc14iYaLu4Maag@mail.gmail.com
ProcSleep() used a PGPROC* variable to point to PROC_QUEUE->links.next,
because that does "the right thing" with SHMQueueInsertBefore(). While that
largely works, it's certainly not correct and unnecessary - we can just use
SHM_QUEUE* to point to the insertion point.
Noticed when testing a 32bit of postgres with undefined behavior
sanitizer. UBSan noticed that sometimes the supposed PGPROC wasn't
sufficiently aligned (required since 46d6e5f567, ensured indirectly, via
ShmemAllocRaw() guaranteeing cacheline alignment).
For now fix this by using a SHM_QUEUE* for the insertion point. Subsequently
we should replace all the use of PROC_QUEUE and SHM_QUEUE with ilist.h, but
that's a larger change that we don't want to backpatch.
Backpatch to all supported versions - it's useful to be able to run postgres
under UBSan.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/20221117014230.op5kmgypdv2dtqsf@awork3.anarazel.de
Backpatch: 11-
In a similar effort to f01592f91, here we mostly rename shadowed local
variables to remove the warnings produced when compiling with
-Wshadow=compatible-local.
This fixes 63 warnings and leaves just 5.
Author: Justin Pryzby, David Rowley
Reviewed-by: Justin Pryzby
Discussion https://postgr.es/m/20220817145434.GC26426%40telsasoft.com
This reverts commits 0147fc7, 4567596, aa64f23, and 5ecd018.
There is no longer agreement that introducing this function
was the right way to address the problem. The consensus now
seems to favor trying to make a correct value for MaxBackends
available to mdules executing their _PG_init() functions.
Nathan Bossart
Discussion: http://postgr.es/m/20220323045229.i23skfscdbvrsuxa@jrouhaud
Before commit 412ad7a556, delayChkpt
was a Boolean. Now it's an integer. Extensions using it need to be
appropriately updated, so let's rename the field to make sure that
a hard compilation failure occurs.
Replacing delayChkpt with delayChkptFlags made a few comments extend
past 80 characters, so I reflowed them and changed some wording very
slightly.
The back-branches will need a different change to restore compatibility
with existing minor releases; this is just for master.
Per suggestion from Tom Lane.
Discussion: http://postgr.es/m/a7880f4d-1d74-582a-ada7-dad168d046d1@enterprisedb.com
If TRUNCATE causes some buffers to be invalidated and thus the
checkpoint does not flush them, TRUNCATE must also ensure that the
corresponding files are truncated on disk. Otherwise, a replay
from the checkpoint might find that the buffers exist but have
the wrong contents, which may cause replay to fail.
Report by Teja Mupparti. Patch by Kyotaro Horiguchi, per a design
suggestion from Heikki Linnakangas, with some changes to the
comments by me. Review of this and a prior patch that approached
the issue differently by Heikki Linnakangas, Andres Freund, Álvaro
Herrera, Masahiko Sawada, and Tom Lane.
Discussion: http://postgr.es/m/BYAPR06MB6373BF50B469CA393C614257ABF00@BYAPR06MB6373.namprd06.prod.outlook.com
Previously, replication slots were released in ProcKill() on error, resulting
in reporting replication slot drop of ephemeral slots after the stats
subsystem was already shut down.
To fix this problem, move replication slot release to a before_shmem_exit()
hook that is called before the stats collector shuts down. There wasn't really
a good reason for the slot handling to be in ProcKill() anyway.
Patch by Masahiko Sawada, with very minor polishing by me.
I, Andres, wrote a test for dropping slots during process exit, but there may
be some OS dependent issues around the number of times FATAL error messages
are displayed due to a still debated libpq issue. So that test will be
committed separately / later.
Reviewed-By: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-By: Andres Freund <andres@anarazel.de>
Author: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/CAD21AoDAeEpAbZEyYJsPZJUmSPaRicVSBObaL7sPaofnKz+9zg@mail.gmail.com
Previously, it was really easy to write code that accessed MaxBackends
before we'd actually initialized it, especially when coding up an
extension. To make this less error-prune, introduce a new function
GetMaxBackends() which should be used to obtain the correct value.
This will ERROR if called too early. Demote the global variable to
a file-level static, so that nobody can peak at it directly.
Nathan Bossart. Idea by Andres Freund. Review by Greg Sabino Mullane,
by Michael Paquier (who had doubts about the approach), and by me.
Discussion: http://postgr.es/m/20210802224204.bckcikl45uezv5e4@alap3.anarazel.de
Instead of referring to target backends by pid, use pgprocno. This
means that we don't have to scan the ProcArray and we can drop some
special case code for dealing with the startup process.
Discussion: https://postgr.es/m/CA%2BhUKGLYRyDaneEwz5Uya_OgFLMx5BgJfkQSD%3Dq9HmwsfRRb-w%40mail.gmail.com
Reviewed-by: Soumyadeep Chakraborty <soumyadeep2007@gmail.com>
Reviewed-by: Ashwin Agrawal <ashwinstar@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
They are used in code that runs both during normal operation and during
WAL replay, and needs to behave differently during replay. Move them to
xlogutils.c, because that's where we have other helper functions used by
redo routines.
Reviewed-by: Andres Freund
Discussion: https://www.postgresql.org/message-id/b3b71061-4919-e882-4857-27e370ab134a%40iki.fi
Also "make reformat-dat-files".
The only change worthy of note is that pgindent messed up the formatting
of launcher.c's struct LogicalRepWorkerId, which led me to notice that
that struct wasn't used at all anymore, so I just took it out.
pgstat_report_wait_start() and pgstat_report_wait_end() required two
conditional branches so far. One to check if MyProc is NULL, the other to
check if pgstat_track_activities is set. As wait events are used around
comparatively lightweight operations, and are inlined (reducing branch
predictor effectiveness), that's not great.
The dependency on MyProc has a second disadvantage: Low-level subsystems, like
storage/file/fd.c, report wait events, but architecturally it is preferable
for them to not depend on inter-process subsystems like proc.h (defining
PGPROC). After this change including pgstat.h (nor obviously its
sub-components like backend_status.h, wait_event.h, ...) does not pull in IPC
related headers anymore.
These goals, efficiency and abstraction, are achieved by having
pgstat_report_wait_start/end() not interact with MyProc, but instead a new
my_wait_event_info variable. At backend startup it points to a local variable,
removing the need to check for MyProc being NULL. During process
initialization my_wait_event_info is redirected to MyProc->wait_event_info. At
shutdown this is reversed. Because wait event reporting now does not need to
know about where the wait event is stored, it does not need to know about
PGPROC anymore.
The removal of the branch for checking pgstat_track_activities is simpler:
Don't check anymore. The cost due to the branch are often higher than the
store - and even if not, pgstat_track_activities is rarely disabled.
The main motivator to commit this work now is that removing the (indirect)
pgproc.h include from pgstat.h simplifies a patch to move statistics reporting
to shared memory (which still has a chance to get into 14).
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20210402194458.2vu324hkk2djq6ce@alap3.anarazel.de
Commit 46d6e5f567 added the atomic variable "waitStart" into PGPROC struct,
to store the time at which wait for lock acquisition started. Previously
this variable was initialized every time each backend started. Instead,
this commit makes postmaster initialize it at the startup, to ensure that
the variable should be initialized before any use of it.
This commit also moves the code to initialize "waitStart" variable for
prepare transaction, from TwoPhaseGetDummyProc() to MarkAsPreparingGuts().
Because MarkAsPreparingGuts() is more proper place to do that since
it initializes other PGPROC variables.
Author: Fujii Masao
Reviewed-by: Atsushi Torikoshi
Discussion: https://postgr.es/m/1df88660-6f08-cc6e-b7e2-f85296a2bdab@oss.nttdata.com
This commit adds new column "waitstart" into pg_locks view. This column
reports the time when the server process started waiting for the lock
if the lock is not held. This information is useful, for example, when
examining the amount of time to wait on a lock by subtracting
"waitstart" in pg_locks from the current time, and identify the lock
that the processes are waiting for very long.
This feature uses the current time obtained for the deadlock timeout
timer as "waitstart" (i.e., the time when this process started waiting
for the lock). Since getting the current time newly can cause overhead,
we reuse the already-obtained time to avoid that overhead.
Note that "waitstart" is updated without holding the lock table's
partition lock, to avoid the overhead by additional lock acquisition.
This can cause "waitstart" in pg_locks to become NULL for a very short
period of time after the wait started even though "granted" is false.
This is OK in practice because we can assume that users are likely to
look at "waitstart" when waiting for the lock for a long time.
The first attempt of this patch (commit 3b733fcd04) caused the buildfarm
member "rorqual" (built with --disable-atomics --disable-spinlocks) to report
the failure of the regression test. It was reverted by commit 890d2182a2.
The cause of this failure was that the atomic variable for "waitstart"
in the dummy process entry created at the end of prepare transaction was
not initialized. This second attempt fixes that issue.
Bump catalog version.
Author: Atsushi Torikoshi
Reviewed-by: Ian Lawrence Barwick, Robert Haas, Justin Pryzby, Fujii Masao
Discussion: https://postgr.es/m/a96013dc51cdc56b2a2b84fa8a16a993@oss.nttdata.com
