Currently makes a call to `realpathSync.native` which doesn't exist
on 8.x or lower
PR-URL: https://github.com/nodejs/node/pull/22663
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Myles Borins <myles.borins@gmail.com>
Implements WHATWG URL support. Example:
```
var u = new url.URL('http://example.org');
```
Many, many other commits improving the implementation have been squashed
into this backport PR. They are not listed separately here for brevity.
Backport-PR-URL: https://github.com/nodejs/node/pull/17365
PR-URL: https://github.com/nodejs/node/pull/7448
Reviewed-By: Ilkka Myller <ilkka.myller@nodefield.com>
Use try/catch to instead of threw.
PR-URL: https://github.com/nodejs/node/pull/10534
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
bootstrap_node.js was directly parsing process.execArgv to see if
internals should be exposed, even though the argv was already parsed by
node. This is unusual and unnecessary, change it to set the option value
from the parser onto the config binding.
Backport-PR-URL: https://github.com/nodejs/node/pull/14483
PR-URL: https://github.com/nodejs/node/pull/12245
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
The variable caught's value is undefined, so the '|| caught' is
useless.
PR-URL: https://github.com/nodejs/node/pull/12884
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Refael Ackermann <refack@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
Reviewed-By: Ron Korving <ron@ronkorving.nl>
Reviewed-By: Daniel Bevenius <daniel.bevenius@gmail.com>
Reviewed-By: Gibson Fahnestock <gibfahn@gmail.com>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Use the original property descriptor instead of just taking the value,
which would, by default, be non-writable and non-configurable.
PR-URL: https://github.com/nodejs/node/pull/9306
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Add a comment to match lib/module.js, missed in #11958.
PR-URL: https://github.com/nodejs/node/pull/12050
Ref: https://github.com/nodejs/node/pull/11958
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Yuta Hiroto <hello@about-hiroppy.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Jeremiah Senkpiel <fishrock123@rocketmail.com>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Commit c5b07d4 ("lib: fix beforeExit not working with -e") runs the
to-be-evaluated code at a later time than before because it switches
from `process.nextTick()` to `setImmediate()`.
It affects `-e 'process.on("message", ...)'` because there is now a
larger time gap between startup and attaching the event listener,
increasing the chances of missing early messages. I'm reasonably
sure `process.nextTick()` was also susceptible to that, only less
pronounced.
Avoid the problem altogether by evaluating the code synchronously.
Harmonizes the logic with `Module.runMain()` from lib/module.js
which also calls `process._tickCallback()` afterwards.
PR-URL: https://github.com/nodejs/node/pull/11958
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Jeremiah Senkpiel <fishrock123@rocketmail.com>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
Reviewed-By: Daijiro Wachi <daijiro.wachi@gmail.com>
Creating an object in JS and using a typed array to transfer values
from C++ to JS is faster than creating an object and setting
properties in C++.
The included benchmark shows ~34% increase in performance with this
change.
PR-URL: https://github.com/nodejs/node/pull/11497
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Jeremiah Senkpiel <fishrock123@rocketmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
* use `+` instead of `*` where one-or-more is required
* switch from String.prototype.match() to RegExp.prototype.test()
PR-URL: https://github.com/nodejs/node/pull/10749
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Jeremiah Senkpiel <fishrock123@rocketmail.com>
Reviewed-By: Jackson Tian <shyvo1987@gmail.com>
Commit 93a44d5 ("src: fix deferred events not working with -e") defers
evaluation of the script to the next tick.
A side effect of that change is that 'beforeExit' listeners run before
the actual script. 'beforeExit' is emitted when the event loop is
empty but process.nextTick() does not ref the event loop.
Fix that by using setImmediate(). Because it is implemented in terms
of a uv_check_t handle, it interacts with the event loop properly.
Fixes: https://github.com/nodejs/node/issues/8534
PR-URL: https://github.com/nodejs/node/pull/8821
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Change '==' to '==='
PR-URL: https://github.com/nodejs/node/pull/8906
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Brian White <mscdex@mscdex.net>
When node is running with --inspect flag, default console.log,
console.warn and other methods call inspector console methods in
addition to current behaviour (dump formatted message to stderr and
stdout). Inspector console methods forward message to DevTools and
show up in DevTools Console with DevTools formatters. Inspector
console methods not present on Node console will be added into it.
Only own methods on global.console object will be changed while in a
debugging session. User are still able to redefine it, use
console.Console or change original methods on Console.prototype.
PR-URL: https://github.com/nodejs/node/pull/7988
Reviewed-By: bnoordhuis - Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: jasnell - James M Snell <jasnell@gmail.com>
Reviewed-By: ofrobots - Ali Ijaz Sheikh <ofrobots@google.com>
This change introduces experimental v8-inspector support. This brings
the DevTools debug protocol allowing Node.js to be debugged with
Chrome DevTools native, or through other debuggers supporting that
protocol.
Partial WebSocket support, to the extent required by DevTools, is
included. This is derived from the implementation in Blink.
v8-inspector support can be disabled by the --without-inspector
configure flag.
PR-URL: https://github.com/nodejs/node/pull/6792
Reviewed-By: jasnell - James M Snell <jasnell@gmail.com>
Reviewed-By: addaleax - Anna Henningsen <anna@addaleax.net>
Reviewed-By: bnoordhuis - Ben Noordhuis <info@bnoordhuis.nl>
The command line flag `--debug-brk` was ignored when the `-e` flag was
also present. This change allows the flags to both be honored when they
are used in a single command line.
PR-URL: https://github.com/nodejs/node/pull/7089
Fixes: https://github.com/nodejs/node/issues/3589
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Don't cache the exported values of fully uninitialized builtins.
This works by adding an additional `loading` flag that is only
active during initial loading of an internal module and checking
that either the module is fully loaded or is in that state before
using its cached value.
This has the effect that builtins modules which could not be loaded
(e.g. because compilation failed due to missing stack space) can be
loaded at a later point.
Fixes: https://github.com/nodejs/node/issues/6899
PR-URL: https://github.com/nodejs/node/pull/6907
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Minor cleanup of how --debug-brk works:
* We no longer need to use command line flags to expose the debug
object.
* Do not depend on the existence of global.v8debug as a mechanism to
determine if --debug-brk was specified.
* We no longer need to set a dummy listener with --debug-brk.
PR-URL: https://github.com/nodejs/node/pull/6599
Reviewed-By: bnoordhuis - Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: cjihrig - Colin Ihrig <cjihrig@gmail.com>
Minor clean up. There are still some places in core that use
the legacy __defineGetter__ syntax. This updates most of those.
PR-URL: https://github.com/nodejs/node/pull/6768
Reviewed-By: Rich Trott <rtrott@gmail.com>
Add process.cpuUsage() method that returns the user and system
CPU time usage of the current process
PR-URL: https://github.com/nodejs/node/pull/6157
Reviewed-By: Robert Lindstaedt <robert.lindstaedt@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Trevor Norris <trev.norris@gmail.com>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Make the builtin libraries available for the `--eval` and
`--print` CLI options, using the same mechanism that the
REPL uses.
This renders workarounds like `node -e 'require("fs").doStuff()'`
unnecessary.
As part of this, the list of builtin modules and the code for
adding the corresponding properties to the target context is moved
to `internal/module.js`, and the previously missing `repl` entry
is added.
PR-URL: https://github.com/nodejs/node/pull/6207
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
This commit improves module loading performance by at least ~25-35%
in the module-loader benchmarks.
Some optimization strategies include:
* Try-finally/try-catch isolation
* Replacing regular expressions with manual parsing
* Avoiding unnecessary string and array creation
* Avoiding constant recompilation of anonymous functions and
function definitions within functions
PR-URL: https://github.com/nodejs/node/pull/5172
Reviewed-By: James M Snell <jasnell@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/5881
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Introduce `--no-browser-globals` configure flag. With this flag set, following
globals won't be exported:
- `setTimeout`, `clearTimeout`, `setInterval`, `clearInterval`,
`setImmediate`, `clearImmediate`
- `console`
These are provided by the DOM implementation in browser, so the
`--no-browser-globals` flag may be helpful when embedding node.js within
chromium/webkit.
Inspired-By: 82e10ce94f
PR-URL: https://github.com/nodejs/node/pull/5853
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Rod Vagg <rod@vagg.org>
In several places throughout the code we write directly to stderr
to report warnings (deprecation, possible eventemitter memory leak).
The current design of simply dumping the text to stderr is less
than ideal. This PR introduces a new "process warnings" mechanism
that emits 'warning' events on the global process object. These are
invoked with a `warning` argument whose value is an Error object.
By default, these warnings will be printed to stderr. This can be
suppressed using the `--no-warnings` and `--no-deprecation` command
line flags. For warnings, the 'warning' event will still be emitted
by the process, allowing applications to handle the warnings in custom
ways. The existing `--no-deprecation` flag will continue to supress
all deprecation output generated by the core lib.
The `--trace-warnings` command line flag will tell Node.js to print
the full stack trace of warnings as part of the default handling.
The existing `--no-deprecation`, `--throw-deprecation` and
`--trace-deprecation` flags continue to work as they currently do,
but the exact output of the warning message is modified to occur
on process.nextTick().
The stack trace for the warnings and deprecations preserve and point
to the correct call site.
A new `process.emitWarning()` API is provided to permit userland
to emit warnings and deprecations using the same consistent
mechanism.
Test cases and documentation are included.
PR-URL: https://github.com/nodejs/node/pull/4782
Reviewed-By: Rod Vagg <rod@vagg.org>
Reviewed-By: Wyatt Preul <wpreul@gmail.com>
Reviewed-By: Jeremiah Senkpiel <fishrock123@rocketmail.com>
