This commits replaces the call of the function setup_tables() with
a call of the function setup_tables_and_check_access() in the method
Multiupdate_prelocking_strategy::handle_end().
There is no known bug that would require this change. However the change
aligns this piece of code with the code existed before the patch for
MDEV-24823.
Before this patch mergeable derived tables / view used in a multi-table
update / delete were merged before the preparation stage.
When the merge of a derived table / view is performed the on expression
attached to it is fixed and ANDed with the where condition of the select S
containing this derived table / view. It happens after the specification of
the derived table / view has been merged into S. If the ON expression refers
to a non existing field an error is reported and some other mergeable derived
tables / views remain unmerged. It's not a problem if the multi-table
update / delete statement is standalone. Yet if it is used in a stored
procedure the select with incompletely merged derived tables / views may
cause a problem for the second call of the procedure. This does not happen
for select queries using derived tables / views, because in this case their
specifications are merged after the preparation stage at which all ON
expressions are fixed.
This patch makes sure that merging of the derived tables / views used in a
multi-table update / delete statement is performed after the preparation
stage.
Approved by Oleksandr Byelkin <sanja@mariadb.com>
Before this patch mergeable derived tables / view used in a multi-table
update / delete were merged before the preparation stage.
When the merge of a derived table / view is performed the on expression
attached to it is fixed and ANDed with the where condition of the select S
containing this derived table / view. It happens after the specification of
the derived table / view has been merged into S. If the ON expression refers
to a non existing field an error is reported and some other mergeable derived
tables / views remain unmerged. It's not a problem if the multi-table
update / delete statement is standalone. Yet if it is used in a stored
procedure the select with incompletely merged derived tables / views may
cause a problem for the second call of the procedure. This does not happen
for select queries using derived tables / views, because in this case their
specifications are merged after the preparation stage at which all ON
expressions are fixed.
This patch makes sure that merging of the derived tables / views used in a
multi-table update / delete statement is performed after the preparation
stage.
Approved by Oleksandr Byelkin <sanja@mariadb.com>
through 2nd execution of SP
This bug caused a server crash on the second call of any stored procedure
that contained an UPDATE statement over a multi-table view reporting an
error message at the prepare stage.
On the first call of the stored procedure after reporting an error at
the preparation stage of the UPDATE statement finished without calling
the function SELECT_LEX::save_prep_leaf_tables() for the SELECT used as
the definition of the view. This left the SELECT_LEX structure used by
the UPDATE statement in an inconsistent state for second call of the stored
procedure.
Approved by Oleksandr Byelkin <sanja@mariadb.com>
Add history row outside of compare_record() check. For TRX_ID
versioning we have to fail can_compare_record to force InnoDB update
which adds history row; and there in ha_innobase::update_row() is
additional "row changed" check where we force history row anyway.
in queries like
create view v1 as select 2 like 1 escape (3 in (select 0 union select 1));
select 2 union select * from v1;
Item_func_like::escape was left uninitialized, because
Item_in_optimizer is const_during_execution()
but not actually const_item() during execution.
It's not, because const subquery evaluation was disabled for derived.
Practically it only needs to be disabled for multi-update
that runs fix_fields() before all tables are locked.
is_bulk_op())' fails on UPDATE on a partitioned table with subquery
(MySQL:71630)
Analysis and fix: Error is not checked. So correct error state is not returned.
Fix: Check for error and return the error state.
Cause
Join tmp table inserts null row because of OUTER JOIN, that's
expected. Since `multi_update::prepare2()` converted
`Item_temptable_rowid` into `Item_field` (28dbdf3)
`multi_update::send_data()` accesses join tmp record directly and
treats it as a normal row ignoring null status of ref field. NULL ref
field is then treated as normal in `multi_update::do_updates()` which
tries to position updated table by reference 0.
Note that reference 0 may be valid reference and the first row of
table can be wrongly updated (see multi_update.test).
Fix
Do not add row into multi-update tmp table in case of null ref
field. Join tmp table does not have null_row status at this time (as
well as `STATUS_NULL_ROW`) and cannot be skipped by these properties
(see first comment in multi_update::send_data()). But it has all null
fields (including the ref field).
Wrong assertion condition. SYSTEM_TIME_ALL indicates that
vers_setup_conds() is done. In case FOR SYSTEM_TIME ALL is specified
in command the assertion passes but not checks anything.
Turn read cache off for update and multi-update for versioned
table. no_cache is reinited on each TABLE open because it is
applicable for specific algorithms.
As a side fix vers_insert_history_row() honors vers_write setting.
Aria with row_format=fixed uses IO_CACHE of type READ_CACHE for
sequential read in update loop. When history row is inserted inside
this loop the cache misses it and fails with error.
TODO:
Currently maria_extra() does not support SEQ_READ_APPEND. Probably it
might be possible to use this type of cache.
MDEV-18957 UPDATE with LIMIT clause is wrong for versioned partitioned tables
UPDATE, DELETE: replace linear search of current/historical records
with vers_setup_conds().
Additional DML cases in view.test
- Any temporary tables created under read-only mode will never be logged
to binary log. Any usage of these tables to update normal tables, even
after read-only has been disabled, will use row base logging (as the
temporary table will not be on the slave).
- Analyze, check and repair table will not be logged in read-only mode.
Other things:
- Removed not used varaibles in
MYSQL_BIN_LOG::flush_and_set_pending_rows_event.
- Set table_share->table_creation_was_logged for all normal tables.
- THD::binlog_query() now returns -1 if statement was not logged., This
is used to update table_share->table_creation_was_logged.
- Don't log admin statements in opt_readonly is set.
- Table's that doesn't have table_creation_was_logged will set binlog format to row
logging.
- Removed not needed/wrong setting of table->s->table_creation_was_logged
in create_table_from_items()
Three issues here:
* ON UPDATE DEFAULT NOW columns were updated after generated columns
were computed - this broke indexed virtual columns
* ON UPDATE DEFAULT NOW columns were updated after BEFORE triggers,
so triggers didn't see the correct NEW value
* in case of a multi-update generated columns were also updated
after BEFORE triggers
on UPDATE, compare_record() was comparing all columns that are marked
for writing. But generated columns that are written to the table are
always deterministic and cannot change unless normal non-generated
columns were changed. So it's enough to compare only non-generated
columns that were explicitly assigned values in the SET clause.
* remove one level of virtual functions
* remove redundant checks
* remove an if() as the value is always known at compilation time
don't pretend that "DEFAULT expr" and "ON UPDATE DEFAULT NOW"
are "basically the same thing"
as well as
MDEV-19500 Update with join stopped worked if there is a call to a procedure in a trigger
MDEV-19521 Update Table Fails with Trigger and Stored Function
MDEV-19497 Replication stops because table not found
MDEV-19527 UPDATE + JOIN + TRIGGERS = table doesn't exists error
Reimplement the fix for (5d510fdbf0)
MDEV-18507 can't update temporary table when joined with table with triggers on read-only
instead of calling open_tables() twice, put multi-update
prepare code inside open_tables() loop.
Add a test for a MDL backoff-and-retry loop inside open_tables()
across multi-update prepare code.
triggers are opened and tables used in triggers are prelocked in
open_tables(). But multi-update can detect what tables will actually
be updated only later, after all main tables are opened.
Meaning, if a table is used in multi-update, but is not actually updated,
its on-update treggers will be opened and tables will be prelocked,
even if it's unnecessary. This can cause more tables to be
write-locked than needed, causing read_only errors, privilege errors
and lock waits.
Fix: don't open/prelock triggers unless table->updating is true.
In multi-update after setting table->updating=true, do a second
open_tables() for newly added tables, if any.
it always required UPDATE privilege on views, not being able to detect
when a views was not actually updated in multi-update.
fix: instead of marking all tables as "updating" by default,
only set "updating" on tables that will actually be updated
by multi-update. And mark the view "updating" if any of the
view's tables is.
For single table updates and multi-table updates , engine independent statistics were not being
read even if the statistics were collected.
Fixed it, so when the optimizer_use_condition_selectivity > 2 then we would read the available
statistics for update queries.
