Sources did not compile in some builds because of undeclared
ER_BLOB_KEY_WITHOUT_LENGTH. Moving the implementations of
Key_part_spec::check_key_length_for_blob() from sql_class.h to sql_class.cc
Plugin fixed to not lock the LOCK_operations when not active.
Server fixed to lock the LOCK_plugin less - do it once per
thread and then only if a plugin was installed/uninstalled.
Originally introduced by e972125f1 to avoid harmless wait for
LOCK_global_system_variables in a newly created thread, which creation was
initiated by system variable update.
At the same time it opens dangerous hole, when system variable update
thread already released LOCK_global_system_variables and ack_receiver
thread haven't yet completed new THD construction. In this case THD
constructor goes completely unprotected.
Since ack_receiver.stop() waits for the thread to go down, we have to
temporarily release LOCK_global_system_variables so that it doesn't
deadlock with ack_receiver.run(). Unfortunately it breaks atomicity
of rpl_semi_sync_master_enabled updates and makes them not serialized.
LOCK_rpl_semi_sync_master_enabled was introduced to workaround the above.
TODO: move ack_receiver start/stop into repl_semisync_master
enable_master/disable_master under LOCK_binlog protection?
Part of MDEV-14984 - regression in connect performance
Rather than parsing session_track_system_variables when thread starts, do
it when first trackable event occurs.
Benchmarked on a 2socket/20core/40threads Broadwell system using sysbench
connect brencmark @40 threads (with select 1 disabled):
101379.77 -> 143016.68 CPS, whereas 10.2 is currently at 137766.31 CPS.
Part of MDEV-14984 - regression in connect performance
One less new/delete per connection.
Removed m_mem_flag since most allocs are thread specific. The only
exception are allocs performed during initialization.
Removed State_tracker and Session_tracker constructors as they don't make
sense anymore.
No reason to access session_sysvars_tracker via get_tracker(), so access
it directly instead.
Part of MDEV-14984 - regression in connect performance
If a derived table has SELECT DISTINCT, provide index statistics for it so that the join optimizer in the
upper select knows that ref access to the table will produce one row.
depends on uninitialised value
Initialized THD::force_read_stats introduced in the patch for MDEV-17605.
Leaving this field uninitialized in the constructor of the THD class may
trigger reading statistical data that is not needed.
depends on uninitialised value
Initialized THD::force_read_stats introduced in the patch for MDEV-17605.
Leaving this field uninitialized in the constructor of the THD class may
trigger reading statistical data that is not needed.
Let xid_cache_insert()/xid_cache_delete() handle xa_state.
Let session tracker use is_explicit_XA() rather than xa_state != XA_NOTR.
Fixed open_tables() to refuse data access in XA_ROLLBACK_ONLY state.
Removed dead code from THD::cleanup(). It was supposed to be a reminder,
but it got messed up over time.
spider_internal_start_trx() is called either with XA_NOTR or XA_ACTIVE,
which is guarded by server callers. Thus is_explicit_XA() is acceptable
replacement for XA_ACTIVE check (which was likely wrong anyway).
Setting xa_state to XA_PREPARED in spider_internal_xa_prepare() isn't
meaningful, as this value is never accessed later. It can't be accessed
by current thread and it can't be recovered either. It can only be
accessed by spider internally, which never happens.
Make spider_xa_lock()/spider_xa_unlock() static.
Part of MDEV-7974 - backport fix for mysql bug#12161 (XA and binlog)
XID_STATE::rm_error is never used by internal 2PC, it is intended to be
used by explicit XA only.
Also removed redundant xid reset from THD::init_for_queries(). Must've
been done already either by THD::transaction constructor or by
THD::cleanup().
Part of MDEV-7974 - backport fix for mysql bug#12161 (XA and binlog)
- Changed replaying to always allocate a separate THD object
for applying log events. This is to avoid tampering original
THD state during replay process.
- Return success from sp_instr_stmt::exec_core() if replaying
succeeds.
- Do not push warnings/errors into diagnostics area if the
transaction must be replayed. This is to avoid reporting
transient errors to the client.
Added two tests galera_sp_bf_abort, galera_sp_insert_parallel.
Wsrep-lib position updated.
This bug is caused by pushdown from HAVING into WHERE.
It appears because condition that is pushed wasn't fixed.
It is also discovered that condition pushdown from HAVING into
WHERE is done wrong. There is no need to build clones for some
conditions that can be pushed. They can be simply moved from HAVING
into WHERE without cloning.
build_pushable_cond_for_having_pushdown(),
remove_pushed_top_conjuncts_for_having() methods are changed.
It is found that there is no transformation made for fields of
pushed condition.
field_transformer_for_having_pushdown transformer is added.
New tests are added. Some comments are changed.
ignore FK-prelocked tables when looking for write-prelocked tables
with auto-increment to complain about "Statement is unsafe because
it invokes a trigger or a stored function that inserts into an
AUTO_INCREMENT column"
The MDEV-17262 commit 26432e49d3
was skipped. In Galera 4, the implementation would seem to require
changes to the streaming replication.
In the tests archive.rnd_pos main.profiling, disable_ps_protocol
for SHOW STATUS and SHOW PROFILE commands until MDEV-18974
has been fixed.
This patch contains a fix for the MDEV-17262/17243 issues and
new mtr test.
These issues (MDEV-17262/17243) have two reasons:
1) After an intermediate commit, a transaction loses its status
of "transaction that registered in the MySQL for 2pc coordinator"
(in the InnoDB) due to the fact that since version 10.2 the
write_row() function (which located in the ha_innodb.cc) does
not call trx_register_for_2pc(m_prebuilt->trx) during the processing
of split transactions. It is necessary to restore this call inside
the write_row() when an intermediate commit was made (for a split
transaction).
Similarly, we need to set the flag of the started transaction
(m_prebuilt->sql_stat_start) after intermediate commit.
The table->file->extra(HA_EXTRA_FAKE_START_STMT) called from the
wsrep_load_data_split() function (which located in sql_load.cc)
will also do this, but it will be too late. As a result, the call
to the wsrep_append_keys() function from the InnoDB engine may be
lost or function may be called with invalid transaction identifier.
2) If a transaction with the LOAD DATA statement is divided into
logical mini-transactions (of the 10K rows) and binlog is rotated,
then in rare cases due to the wsrep handler re-registration at the
boundary of the split, the last portion of data may be lost. Since
splitting of the LOAD DATA into mini-transactions is technical,
I believe that we should not allow these mini-transactions to fall
into separate binlogs. Therefore, it is necessary to prohibit the
rotation of binlog in the middle of processing LOAD DATA statement.
https://jira.mariadb.org/browse/MDEV-17262 and
https://jira.mariadb.org/browse/MDEV-17243
* MDEV-16509 Improve wsrep commit performance with binlog disabled
Release commit order critical section early after trx_commit_low() if
binlog is not transaction coordinator. In order to avoid two phase commit,
binlog_hton is not registered for THD during IO_CACHE population.
Implemented a test which verifies that the transactions release
commit order early.
This optimization will change behavior during recovery as the commit
is not two phase when binlog is off. Fixed and recorded wsrep-recover-v25
and wsrep-recover to match the behavior.
* MDEV-18730 Ordering for wsrep binlog group commit
Previously out of order execution was allowed for wsrep commits.
Established proper ordering by populating wait_for_commit
for every wsrep THD and making group commit leader to wait for
prior commits before proceeding to trx_group_commit_leader().
* MDEV-18730 Added a test case to verify correct commit ordering
* MDEV-16509, MDEV-18730 Review fixes
Use WSREP_EMULATE_BINLOG() macro to decide if the binlog_hton
should be registered. Whitespace/syntax fixes and cleanups.
* MDEV-16509 Require binlog for galera_var_innodb_disallow_writes test
If the commit to InnoDB is done in one phase, the native InnoDB behavior
is that the transaction is committed in memory before it is persisted to
disk. This means that the innodb_disallow_writes=ON may not prevent
transaction to become visible to other readers before commit is completely
over. On the other hand, if the commit is two phase (as it is with binlog),
the transaction will be blocked in prepare phase.
Fixed the test to use binlog, which enforces two phase commit, which
in turn makes commit to block before the changes become visible to
other connections. This guarantees that the test produces expected
result.
The patches features an optional shutdown behavior to hold on until
after all connected slaves have been sent the last binlogged event.
The connected slave is one whose START SLAVE has been acknowledged and
that was not stopped since that though it could be technically
reconnecting in background.
The solution therefore disallows killing the dump thread until is has
found EOF of the latest binlog file. It is up to the shutdown
requester (DBA) to set up a sufficiently large shutdown timeout value
for shudown to wait patiently until lagging behind slaves have been
synchronized. On the other hand if a specific slave needs exclusion
from synchronization the DBA would have to stop it manually which
would terminate its dump thread.
`mysqladmin shutdown' is extended with a `--wait_for_all_slaves' option
which translates to `SHUTDOW WAIT FOR ALL SLAVES' sql query
to enable the feature on the client side.
The patch also performs a small refactoring of the server shutdown
around close_connections() to introduce kill thread phases which
are two as of current.
Make mysqltest to use --ps-protocol more
use prepared statements for everything that server supports
with the exception of CALL (for now).
Fix discovered test failures and bugs.
tests:
* PROCESSLIST shows Execute state, not Query
* SHOW STATUS increments status variables more than in text protocol
* multi-statements should be avoided (see tests with a wrong delimiter)
* performance_schema events have different names in --ps-protocol
* --enable_prepare_warnings
mysqltest.cc:
* make sure run_query_stmt() doesn't crash if there's
no active connection (in wait_until_connected_again.inc)
* prepare all statements that server supports
protocol.h
* Protocol_discard::send_result_set_metadata() should not send
anything to the client.
sql_acl.cc:
* extract the functionality of getting the user for SHOW GRANTS
from check_show_access(), so that mysql_test_show_grants() could
generate the correct column names in the prepare step
sql_class.cc:
* result->prepare() can fail, don't ignore its return value
* use correct number of decimals for EXPLAIN columns
sql_parse.cc:
* discard profiling for SHOW PROFILE. In text protocol it's done in
prepare_schema_table(), but in --ps it is called on prepare only,
so nothing was discarding profiling during execute.
* move the permission checking code for SHOW CREATE VIEW to
mysqld_show_create_get_fields(), so that it would be called during
prepare step too.
* only set sel_result when it was created here and needs to be
destroyed in the same block. Avoid destroying lex->result.
* use the correct number of tables in check_show_access(). Saying
"as many as possible" doesn't work when first_not_own_table isn't
set yet.
sql_prepare.cc:
* use correct user name for SHOW GRANTS columns
* don't ignore verbose flag for SHOW SLAVE STATUS
* support preparing REVOKE ALL and ROLLBACK TO SAVEPOINT
* don't ignore errors from thd->prepare_explain_fields()
* use select_send result for sending ANALYZE and EXPLAIN, but don't
overwrite lex->result, because it might be needed to issue execute-time
errors (select_dumpvar - too many rows)
sql_show.cc:
* check grants for SHOW CREATE VIEW here, not in mysql_execute_command
sql_view.cc:
* use the correct function to check privileges. Old code was doing
check_access() for thd->security_ctx, which is invoker's sctx,
not definer's sctx. Hide various view related errors from the invoker.
sql_yacc.yy:
* initialize lex->select_lex for LOAD, otherwise it'll contain garbage
data that happen to fail tests with views in --ps (but not otherwise).
slave_list was used to provide data for SHOW SLAVE HOSTS and
Slaves_connected status variable.
Introduced binlog_dump_thread_count which is exposed via Slaves_connected
(replaces slave_list.records).
Store Slave_info on THD and access it by iterating server_threads
(replaces slave_list).
Added:
THD::slave_info
binlog_dump_thread_count
show_slave_hosts_callback()
Removed:
slave_list
SLAVE_LIST_CHUNK
SLAVE_ERRMSG_SIZE
slave_list_key()
slave_info_free()
init_slave_list()
end_slave_list()
all_slave_list_mutexes
init_all_slave_list_mutexes()
key_LOCK_slave_list
LOCK_slave_list
Moved:
SLAVE_INFO -> Slave_info
register_slave() -> THD::register_slave()
unregister_slave() -> THD::unregister_slave()
Also removed redundant end_slave() from close_connections(): it is called
again soon afterwards by clean_up().
Pre-requisite for clean MDEV-18450 solution.
and, again, *don't use thd->clear_error()*
this fixed main.sp_notembedded failure on various amd64 platforms
(where ER_STACK_OVERRUN_NEED_MORE happens to fire in open_stat_tables()
under Dummy_error_handler)
This patch adds support for expiring user passwords.
The following statements are extended:
CREATE USER user@localhost PASSWORD EXPIRE [option]
ALTER USER user@localhost PASSWORD EXPIRE [option]
If no option is specified, the password is expired with immediate
effect. If option is DEFAULT, global policy applies according to
the default_password_lifetime system var (if 0, password never
expires, if N, password expires every N days). If option is NEVER,
the password never expires and if option is INTERVAL N DAY, the
password expires every N days.
The feature also supports the disconnect_on_expired_password system
var and the --connect-expired-password client option.
Closes#1166
The check for streaming replication logging format in
THD::decide_logging_format() did the check also for DDLs running
in TOI mode. This caused DROP DATABASE to fail if streaming
replication was enabled.
Added check for THD wsrep execution mode and perform the check
only if the THD is in local processing mode (i.e. not TOI).
Added galera_sr_create_drop test to verify that CREATE/DROP
statements pass even if streaming replication is on.
Condition can be pushed from the HAVING clause into the WHERE clause
if it depends only on the fields that are used in the GROUP BY list
or depends on the fields that are equal to grouping fields.
Aggregate functions can't be pushed down.
How the pushdown is performed on the example:
SELECT t1.a,MAX(t1.b)
FROM t1
GROUP BY t1.a
HAVING (t1.a>2) AND (MAX(c)>12);
=>
SELECT t1.a,MAX(t1.b)
FROM t1
WHERE (t1.a>2)
GROUP BY t1.a
HAVING (MAX(c)>12);
The implementation scheme:
1. Extract the most restrictive condition cond from the HAVING clause of
the select that depends only on the fields that are used in the GROUP BY
list of the select (directly or indirectly through equalities)
2. Save cond as a condition that can be pushed into the WHERE clause
of the select
3. Remove cond from the HAVING clause if it is possible
The optimization is implemented in the function
st_select_lex::pushdown_from_having_into_where().
New test file having_cond_pushdown.test is created.
This task involves the implementation for the optimizer trace.
This feature produces a trace for any SELECT/UPDATE/DELETE/,
which contains information about decisions taken by the optimizer during
the optimization phase (choice of table access method, various costs,
transformations, etc). This feature would help to tell why some decisions were
taken by the optimizer and why some were rejected.
Trace is session-local, controlled by the @@optimizer_trace variable.
To enable optimizer trace we need to write:
set @@optimizer_trace variable= 'enabled=on';
To display the trace one can run:
SELECT trace FROM INFORMATION_SCHEMA.OPTIMIZER_TRACE;
This task also involves:
MDEV-18489: Limit the memory used by the optimizer trace
introduces a switch optimizer_trace_max_mem_size which limits
the memory used by the optimizer trace. This was implemented by
Sergei Petrunia.
ANALYZE and ANALYZE FORMAT=JSON structures are changed in the way that they
show additional information when rowid filter is used:
- r_selectivity_pct - the observed filter selectivity
- r_buffer_size - the size of the rowid filter container buffer
- r_filling_time_ms - how long it took to fill rowid filter container
New class Rowid_filter_tracker was added. This class is needed to collect data
about how rowid filter is executed.
introduce the syntax
... IDENTIFIED { WITH | VIA }
plugin [ { USING | AS } auth ]
[ OR plugin [ { USING | AS } auth ]
[ OR ... ]]
Server will try auth plugins in the specified order until the first
success. No protocol changes, server uses the existing "switch plugin"
packet.
The auth chain is stored in json as
"auth_or":[{"plugin":"xxx","authentication_string":"yyy"},
{},
{"plugin":"foo","authentication_string":"bar"},
...],
"plugin":"aaa", "authentication_string":"bbb"
Note:
* "auth_or" implies that there might be "auth_and" someday;
* one entry in the array is an empty object, meaning to take plugin/auth
from the main json object. This preserves compatibility with
the existing mysql.global_priv table and with the mysql.user view.
This entry is preferrably a mysql_native_password plugin for a
non-empty mysql.user.password column.
SET PASSWORD is supported and changes the password for the *first*
plugin in the chain that has a notion of a "password"
This patch contains a full implementation of the optimization
that allows to use in-memory rowid / primary filters built for range
conditions over indexes. In many cases usage of such filters reduce
the number of disk seeks spent for fetching table rows.
In this implementation the choice of what possible filter to be applied
(if any) is made purely on cost-based considerations.
This implementation re-achitectured the partial implementation of
the feature pushed by Galina Shalygina in the commit
8d5a11122c.
Besides this patch contains a better implementation of the generic
handler function handler::multi_range_read_info_const() that
takes into account gaps between ranges when calculating the cost of
range index scans. It also contains some corrections of the
implementation of the handler function records_in_range() for MyISAM.
This patch supports the feature for InnoDB and MyISAM.
In contrast to thread_count, which is decremented by THD destructor,
this one was most probably intended to be decremented after all THD
destructors are done.
THD_count class was added to achieve similar effect with thread_count.
Aim is to reduce usage of LOCK_thread_count and COND_thread_count.
Part of MDEV-15135.
Implemented and integrated THD_list as a replacement for the global
thread list. It uses own mutex instead of LOCK_thread_count for THD
list protection.
Removed unused first_global_thread() and next_global_thread().
delayed_insert_threads is now protected by LOCK_delayed_insert. Although
this patch doesn't fix very wrong synchronization of this variable.
After this patch there are only 2 legitimate uses of LOCK_thread_count
left, both in mysqld.cc: thread_count and ready_to_exit.
Aim is to reduce usage of LOCK_thread_count and COND_thread_count.
Part of MDEV-15135.
always logged properly with binlog_row_image=MINIMAL
There are two issues fixed in this commit.
The first is an observation of a multi-table UPDATE binlogged
in row-format in binlog_row_image=MINIMAL mode. While the UPDATE aims
at a table with an ON-UPDATE attribute its binlog after-image misses
to record also installed default value.
The reason for that turns out missed marking of default-capable fields
in TABLE::write_set.
This is fixed to mark such fields similarly to 10.2's MDEV-10134 patch (db7edfed17)
that introduced it. The marking follows up 93d1e5ce0b841bed's idea
to exploit TABLE:rpl_write_set introduced there though,
and thus does not mess (in 10.1) with the actual MDEV-10134 agenda.
The patch makes formerly arg-less TABLE::mark_default_fields_for_write()
to accept an argument which would be TABLE:rpl_write_set.
The 2nd issue is extra columns in in binlog_row_image=MINIMAL before-image
while merely a packed primary key is enough. The test main.mysqlbinlog_row_minimal
always had a wrong result recorded.
This is fixed to invoke a function that intended for read_set
possible filtering and which is called (supposed to) in all type of MDL, UPDATE
including; the test results have gotten corrected.
At *merging* from 10.1->10.2 the 1st "main" part of the patch is unnecessary
since the bug is not observed in 10.2, so only hunks from
sql/sql_class.cc
are required.
This mutex can be freed when server shuts down (when thread_count goes down to 0)
, but it is still used inside THD::~THD() when Statement_map is destroyed.
The fix is to call Statement_map::reset() at the point where thread_count
is still positive, and avoid locking LOCK_prepared_stmt_count in THD
destructor.
The error message modified.
Then the TABLE_SHARE::error_table_name() implementation taken from 10.3,
to be used as a name of the table in this message.
Internal transactions may not have trx->mysql_thd.
But at the same time, trx->duplicates should only hold if
REPLACE or INSERT...ON DUPLICATE KEY UPDATE was executed from SQL.
The flag feels misplaced. A more appropriate place for it would
be row_prebuilt_t or similar.
Part of MDEV-5336 Implement LOCK FOR BACKUP
- Changed check of Global_only_lock to also include BACKUP lock.
- We store latest MDL_BACKUP_DDL lock in thd->mdl_backup_ticket to be able
to downgrade lock during copy_data_between_tables()
main.derived_cond_pushdown: Move all 10.3 tests to the end,
trim trailing white space, and add an "End of 10.3 tests" marker.
Add --sorted_result to tests where the ordering is not deterministic.
main.win_percentile: Add --sorted_result to tests where the
ordering is no longer deterministic.
thd_rpl_stmt_based(): A new predicate to check if statement-based
replication is active. (This can also hold when replication is not
in use, but binlog is.)
que_thr_stop(), row_ins_duplicate_error_in_clust(),
row_ins_sec_index_entry_low(), row_ins(): On a duplicate key error,
only lock all index records when statement-based replication is in use.
Problem:
========
Truncate operation holds MDL on the table (t1) and tries to
acquire InnoDB dict_operation_lock. Purge holds dict_operation_lock
and tries to acquire MDL on the table (t1) to evaluate virtual
column expressions for indexed virtual columns.
It leads to deadlock of purge and truncate table (DDL).
Solution:
=========
If purge tries to acquire MDL on the table then it should do the following:
i) Purge should release all innodb latches (including dict_operation_lock)
before acquiring metadata lock on the table.
ii) After acquiring metadata lock on the table, it should check whether the
table was dropped or renamed. If the table is dropped then purge should
ignore the undo log record. If the table is renamed then it should
release the old MDL and acquire MDL on the new name.
iii) Once purge acquires MDL, it should use the SQL table handle for all
the remaining virtual index for the purge record.
purge_node_t: Introduce new virtual column information to know whether
the MDL was acquired successfully.
This is joint work with Marko Mäkelä.
specific temporary errors
The optimistic parallel slave's worker thread could face a run-time error due to
the algorithm's specifics which allows for conflicts like the reported
"Can't find record in 'table'".
A typical stack is like
{noformat}
#0 handler::print_error (this=0x61c00008f8a0, error=149, errflag=0) at handler.cc:3650
#1 0x0000555555e95361 in write_record (thd=thd@entry=0x62a0000a2208, table=table@entry=0x61f00008ce88, info=info@entry=0x7fffdee356d0) at sql_insert.cc:1944
#2 0x0000555555ea7767 in mysql_insert (thd=thd@entry=0x62a0000a2208, table_list=0x61b00012ada0, fields=..., values_list=..., update_fields=..., update_values=..., duplic=<optimized out>, ignore=<optimized out>) at sql_insert.cc:1039
#3 0x0000555555efda90 in mysql_execute_command (thd=thd@entry=0x62a0000a2208) at sql_parse.cc:3927
#4 0x0000555555f0cc50 in mysql_parse (thd=0x62a0000a2208, rawbuf=<optimized out>, length=<optimized out>, parser_state=<optimized out>) at sql_parse.cc:7449
#5 0x00005555566d4444 in Query_log_event::do_apply_event (this=0x61200005b9c8, rgi=<optimized out>, query_arg=<optimized out>, q_len_arg=<optimized out>) at log_event.cc:4508
#6 0x00005555566d639e in Query_log_event::do_apply_event (this=<optimized out>, rgi=<optimized out>) at log_event.cc:4185
#7 0x0000555555d738cf in Log_event::apply_event (rgi=0x61d0001ea080, this=0x61200005b9c8) at log_event.h:1343
#8 apply_event_and_update_pos_apply (ev=ev@entry=0x61200005b9c8, thd=thd@entry=0x62a0000a2208, rgi=rgi@entry=0x61d0001ea080, reason=<optimized out>) at slave.cc:3479
#9 0x0000555555d8596b in apply_event_and_update_pos_for_parallel (ev=ev@entry=0x61200005b9c8, thd=thd@entry=0x62a0000a2208, rgi=rgi@entry=0x61d0001ea080) at slave.cc:3623
#10 0x00005555562aca83 in rpt_handle_event (qev=qev@entry=0x6190000fa088, rpt=rpt@entry=0x62200002bd68) at rpl_parallel.cc:50
#11 0x00005555562bd04e in handle_rpl_parallel_thread (arg=arg@entry=0x62200002bd68) at rpl_parallel.cc:1258
{noformat}
Here {{handler::print_error}} computes whether to error log the
current error when --log-warnings > 1. The decision flag is consulted
bu {{my_message_sql()}} which can be eventually called.
In the bug case the decision is to log.
However in the optimistic mode slave applier case any conflict is
attempted to resolve with rollback and retry to success. Hence the
logging is at least extraneous.
The case is fixed with adding a new flag {{ME_LOG_AS_WARN}} which
{{handler::print_error}} may propagate further on through {{my_error}}
when the error comes from an optimistically running slave worker thread.
The new flag effectively requests the warning level for the errlog record,
while the thread's DA records the actual error (which is regarded as temporary one
by the parallel slave error handler).
Fixed by deleting the sequence if we where not able to initialize it
I also noticed that we didn't always set the error message when
check_killed(), which could lead to aborted queries without error
beeing properly set. Fixed by default setting error message if
check_error() noticed that killed had been called.
This allowed me to remove a lot of calls to thd->send_kill_message().
The cause of this was several different bugs:
- When using binary logging with binlog_row_image=FULL
the all bits in read_set was set, which caused a
different (wrong) pattern for marking vcol_set.
- TABLE::mark_virtual_columns_for_write() didn't in all
cases mark vcol_set with the vcol_field.
- TABLE::update_virtual_fields() has to update all
vcol fields on REPLACE if binary logging with FULL
is used.
- VCOL_UPDATE_INDEXED should update all vcol fields part
of an index that was not updated by VCOL_UPDATE_FOR_READ
- max_row_length() calculated length of NULL and not
used fields. This didn't cause any crash, but used
more memory than needed.
simplify. move common code inside, specify common flags inside,
rewrite dead code (`if (mode & O_TEMPORARY)` on Linux, where
`O_TEMPORARY` is always 0) to actually do something.
The code passing positions in the query to constructors of
Rewritable_query_parameter descendants (e.g. Item_splocal)
was not reliable. It used various Lex_input_stream methods:
- get_tok_start()
- get_tok_start_prev()
- get_tok_end()
- get_ptr()
to find positions of the recently scanned tokens.
The challenge was mostly to choose between get_tok_start()
and get_tok_start_prev(), taking into account to the current
grammar (depending if lookahead takes place before
or after we read the positions in every particular rule).
But this approach did not work at all in combination
with token contractions, when MYSQLlex() translates
two tokens into one token ID, for example:
WITH ROLLUP -> WITH_ROLLUP_SYM
As a result, the tokenizer is already one more token ahead.
So in query fragment:
"GROUP BY d, spvar WITH ROLLUP"
get_tok_start() points to "ROLLUP".
get_tok_start_prev() points to "WITH".
As a result, it was "WITH" who was erroneously replaced
to NAME_CONST() instead of "spvar".
This patch modifies the code to do it a different way.
Changes:
1. For keywords and identifiers, the tokenizer now
returns LEX_CTRING pointing directly to the query
fragment. So query positions are now just available using:
- $1.str - for the beginning of a token
- $1.str+$1.length - for the end of a token
2. Identifiers are not allocated on the THD memory root
in the tokenizer any more. Allocation is now done
on later stages, in methods like LEX::create_item_ident().
3. Two LEX_CSTRING based structures were added:
- Lex_ident_cli_st - used to store the "client side"
identifier representation, pointing to the
query fragment. Note, these identifiers
are encoded in @@character_set_client
and can have broken byte sequences.
- Lex_ident_sys_st - used to store the "server side"
identifier representation, pointing to the
THD allocated memory. This representation
guarantees that the identifier was checked
for being well-formed, and is encoded in utf8.
4. To distinguish between two identifier types
in the grammar, two Bison types were added:
<ident_cli> and <ident_sys>
5. All non-reserved keywords were marked as
being of the type <ident_cli>.
All reserved keywords are still of the type NONE.
6. All curly brackets in rules collecting
non-reserved keywords into non-terminal
symbols were removed, e.g.:
Was:
keyword_sp_data_type:
BIT_SYM {}
| BOOLEAN_SYM {}
Now:
keyword_sp_data_type:
BIT_SYM
| BOOLEAN_SYM
This is important NOT to have brackets here!!!!
This is needed to make sure that the underlying
Lex_ident_cli_ststructure correctly passes up to
the calling rule.
6. The code to scan identifiers and keywords
was moved from lex_one_token() into new
Lex_input_stream methods:
scan_ident_sysvar()
scan_ident_start()
scan_ident_middle()
scan_ident_delimited()
This was done to:
- get rid of enormous amount of references to &yylval->lex_str
- and remove a lot of references like lip->xxx
7. The allocating functionality which puts identifiers on the
THD memory root now resides in methods of Lex_ident_sys_st,
and in THD::to_ident_sys_alloc().
get_quoted_token() was removed.
8. Cleanup: check_simple_select() was moved as a method to LEX.
9. Cleanup: Some more functionality was moved from *.yy
to new methods were added to LEX:
make_item_colon_ident_ident()
make_item_func_call_generic()
create_item_qualified_asterisk()
These test can sporadically show mutex deadlock warnings between LOCK_wsrep_thd
and LOCK_thd_data mutexes. This means that these mutexes can be locked in opposite
order by different threads, and thus result in deadlock situation.
To fix such issue, the locking policy of these mutexes should be revised and
enforced to be uniform. However, a quick code review shows that the number of
lock/unlock operations for these mutexes combined is between 100-200, and all these
mutex invocations should be checked/fixed.
On the other hand, it turns out that LOCK_wsrep_thd is used for protecting access to
wsrep variables of THD (wsrep_conflict_state, wsrep_query_state), whereas LOCK_thd_data
protects query, db and mysys_var variables in THD. Extending LOCK_thd_data to protect
also wsrep variables looks like a viable solution, as there should not be a use case
where separate threads need simultaneous access to wsrep variables and THD data variables.
In this commit LOCK_wsrep_thd mutex is refactored to be replaced by LOCK_thd_data.
By bluntly replacing LOCK_wsrep_thd by LOCK_thd_data, will result in double locking
of LOCK_thd_data, and some adjustements have been performed to fix such situations.
Methods:
- Item_user_var_as_out_param::print_for_load()
- sql_exchange::escaped_given(void)
Parameters:
- sql_exchange in write_execute_load_query_log_event()
- sql_exchange in mysql_load()
- sql_exchange in Load_log_event::Load_log_event()
Also, removing cast to "char*" in a few places in
Load_log_event::Load_log_event()
Backporting from bb-10.2-compatibility to bb-10.2-ext
Version: 2018-01-26
- CREATE PACKAGE [BODY] statements are now
entirely written to mysql.proc with type='PACKAGE' and type='PACKAGE BODY'.
- CREATE PACKAGE BODY now supports IF NOT EXISTS
- DROP PACKAGE BODY now supports IF EXISTS
- CREATE OR REPLACE PACKAGE [BODY] is now supported
- CREATE PACKAGE [BODY] now support the DEFINER clause:
CREATE DEFINER user@host PACKAGE pkg ... END;
CREATE DEFINER user@host PACKAGE BODY pkg ... END;
- CREATE PACKAGE [BODY] now supports SQL SECURITY and COMMENT clauses, e.g.:
CREATE PACKAGE p1 SQL SECURITY INVOKER COMMENT "comment" AS ... END;
- Package routines are now created from the package CREATE PACKAGE BODY
statement and don't produce individual records in mysql.proc.
- CREATE PACKAGE BODY now supports package-wide variables.
Package variables can be read and set inside package routines.
Package variables are stored in a separate sp_rcontext,
which is cached in THD on the first packate routine call.
- CREATE PACKAGE BODY now supports the initialization section.
- All public routines (i.e. declared in CREATE PACKAGE)
must have implementations in CREATE PACKAGE BODY
- Only public package routines are available outside of the package
- {CREATE|DROP} PACKAGE [BODY] now respects CREATE ROUTINE and ALTER ROUTINE
privileges
- "GRANT EXECUTE ON PACKAGE BODY pkg" is now supported
- SHOW CREATE PACKAGE [BODY] is now supported
- SHOW PACKAGE [BODY] STATUS is now supported
- CREATE and DROP for PACKAGE [BODY] now works for non-current databases
- mysqldump now supports packages
- "SHOW {PROCEDURE|FUNCTION) CODE pkg.routine" now works for package routines
- "SHOW PACKAGE BODY CODE pkg" now works (the package initialization section)
- A new package body level MDL was added
- Recursive calls for package procedures are now possible
- Routine forward declarations in CREATE PACKATE BODY are now supported.
- Package body variables now work as SP OUT parameters
- Package body variables now work as SELECT INTO targets
- Package body variables now support ROW, %ROWTYPE, %TYPE
- CREATE PACKAGE [BODY] statements are now
entirely written to mysql.proc with type='PACKAGE' and type='PACKAGE BODY'.
- CREATE PACKAGE BODY now supports IF NOT EXISTS
- DROP PACKAGE BODY now supports IF EXISTS
- CREATE OR REPLACE PACKAGE [BODY] is now supported
- CREATE PACKAGE [BODY] now support the DEFINER clause:
CREATE DEFINER user@host PACKAGE pkg ... END;
CREATE DEFINER user@host PACKAGE BODY pkg ... END;
- CREATE PACKAGE [BODY] now supports SQL SECURITY and COMMENT clauses, e.g.:
CREATE PACKAGE p1 SQL SECURITY INVOKER COMMENT "comment" AS ... END;
- Package routines are now created from the package CREATE PACKAGE BODY
statement and don't produce individual records in mysql.proc.
- CREATE PACKAGE BODY now supports package-wide variables.
Package variables can be read and set inside package routines.
Package variables are stored in a separate sp_rcontext,
which is cached in THD on the first packate routine call.
- CREATE PACKAGE BODY now supports the initialization section.
- All public routines (i.e. declared in CREATE PACKAGE)
must have implementations in CREATE PACKAGE BODY
- Only public package routines are available outside of the package
- {CREATE|DROP} PACKAGE [BODY] now respects CREATE ROUTINE and ALTER ROUTINE
privileges
- "GRANT EXECUTE ON PACKAGE BODY pkg" is now supported
- SHOW CREATE PACKAGE [BODY] is now supported
- SHOW PACKAGE [BODY] STATUS is now supported
- CREATE and DROP for PACKAGE [BODY] now works for non-current databases
- mysqldump now supports packages
- "SHOW {PROCEDURE|FUNCTION) CODE pkg.routine" now works for package routines
- "SHOW PACKAGE BODY CODE pkg" now works (the package initialization section)
- A new package body level MDL was added
- Recursive calls for package procedures are now possible
- Routine forward declarations in CREATE PACKATE BODY are now supported.
- Package body variables now work as SP OUT parameters
- Package body variables now work as SELECT INTO targets
- Package body variables now support ROW, %ROWTYPE, %TYPE
Because NOW() is set to system time, unless overriden.
And both should follow big manual system time changes,
while still coping with lowres system clocks.
Ignoring system time changes is both confusing and
breaks with restarts.
RBR cannot work with system versioning on the master.
row_end column is either system time (not @@timestamp) with microsecond
precision or transaction id. Either way, it'll certainly be different
on the slave. So if the master row contains row_end column, it won't
match on the slave. And if we ignore row_end when comparing,
then some other row might match instead.
enum_mark_columns -> enum_column_usage
mark_used_columns -> column_usage
further commits will replace MARK_COLUMN_NONE with
COLUMN_READ and COLUMN_WRITE that convey the intention
without causing columns to be marked
Handle string length as size_t, consistently (almost always:))
Change function prototypes to accept size_t, where in the past
ulong or uint were used. change local/member variables to size_t
when appropriate.
This fix excludes rocksdb, spider,spider, sphinx and connect for now.
This will make it easier to how memory allocation is done when debugging
with either DBUG or gdb.
Will especially help when debugging stored procedures
Main change is a name argument as second argument to init_alloc_root()
init_sql_alloc()
Other things:
- Added DBUG_ENTER/EXIT to some Virtual_tmp_table functions
Counter for select numbering made stored with the statement (before was global)
So now it does have always accurate value which does not depend on
interruption of statement prepare by errors like lack of table in
a view definition.
- Changing sp_rcontext::m_var_items from list of Item to list of Item_field
- Renaming sp_rcontext::get_item() to get_variable() and changing
its return type from Item* to Item_field *
- Adding sp_rcontext::get_parameter() and sp_rcontext::set_parameter(),
wrappers for get_variable() and set_variable() with extra DBUG_ASSERT.
Using new methods instead of get_variable()/set_variable() in
relevant places.
This was done in, among other things:
- thd->db and thd->db_length
- TABLE_LIST tablename, db, alias and schema_name
- Audit plugin database name
- lex->db
- All db and table names in Alter_table_ctx
- st_select_lex db
Other things:
- Changed a lot of functions to take const LEX_CSTRING* as argument
for db, table_name and alias. See init_one_table() as an example.
- Changed some function arguments from LEX_CSTRING to const LEX_CSTRING
- Changed some lists from LEX_STRING to LEX_CSTRING
- threads_mysql.result changed because process list_db wasn't always
correctly updated
- New append_identifier() function that takes LEX_CSTRING* as arguments
- Added new element tmp_buff to Alter_table_ctx to separate temp name
handling from temporary space
- Ensure we store the length after my_casedn_str() of table/db names
- Removed not used version of rename_table_in_stat_tables()
- Changed Natural_join_column::table_name and db_name() to never return
NULL (used for print)
- thd->get_db() now returns db as a printable string (thd->db.str or "")
1. Moving the following methods from THD to Item_change_list:
nocheck_register_item_tree_change()
check_and_register_item_tree_change()
rollback_item_tree_changes()
as they work only with the "change_list" member and don't
require anything else from THD.
2. Deriving THD from Item_change_list
This change will help to fix "MDEV-14603 signal 11 with short stacktrace" easier.
trx_undo_page_report_modify(): For SPATIAL INDEX, keep logging
updated off-page columns twice, so that
the minimum bounding rectangle (MBR) will be logged.
Avoiding the redundant logging would require larger changes
to the undo log format.
row_build_index_entry_low(): Handle SPATIAL_UNKNOWN more robustly,
by refusing to purge the record from the spatial index.
We can get this code when processing old undo log from 10.2.10 or
10.2.11 (the releases affected by MDEV-14799, which was a regression
from MDEV-14051).
If translation table present when we materialize the derived table then
change it to point to the materialized table.
Added debug info to see really what happens with what derived.
Other changes done to get this to work:
- Added 'internal_tables' to TABLE object to list which sequence tables
is needed to use the table.
- Mark any expression using DEFAULT() with LEX->default_used.
This is needed when deciding if we should open internal sequence
tables when a table is opened (we don't need to open sequence tables
if the main table is only used with SELECT).
- Create_and_open_temporary_table() can now also open all internal
sequence tables.
- Added option MYSQL_LOCK_USE_MALLOC to mysql_lock_tables()
to force memory allocation to be used with malloc instead of
memroot.
- Added flag to MYSQL_LOCK to remember if allocation was done with
malloc or memroot (makes code simpler and safer).
- init_one_table_for_prelocking() now takes argument for what lock to
use instead of it's a routine or something else.
- Renamed prelocking placeholders to make them more understandable as
they are now used in more code.
- Changed test in check_lock_and_start_stmt() if found table has correct
locks. The old test didn't work for tables that has lock
TL_WRITE_ALLOW_WRITE, which is what sequence tables are using.
- Added VCOL_NOT_VIRTUAL option to ensure that sequence functions can't
be used with virtual columns
- More sequence tests
and specifically the ack receiving functionality.
Semisync is turned to be static instead of plugin so its functions
are invoked at the same points as RUN_HOOKS.
The RUN_HOOKS and the observer interface remain to be removed by later
patch.
Todo:
React on killed status by repl_semisync_master.wait_after_sync(). Currently
Repl_semi_sync_master::commit_trx does not check the killed status.
There were few bugfixes found that are present in mysql and its unclear
whether/how they are covered. Those include:
Bug#15985893: GTID SKIPPED EVENTS ON MASTER CAUSE SEMI SYNC TIME-OUTS
Bug#17932935 CALLING IS_SEMI_SYNC_SLAVE() IN EACH FUNCTION CALL
HAS BAD PERFORMANCE
Bug#20574628: SEMI-SYNC REPLICATION PERFORMANCE DEGRADES WITH A HIGH NUMBER OF THREADS
Merge branch '10.3' into trunk
Both field_visibility and VERS_HIDDEN_FLAG exist independently.
TODO:
VERS_HIDDEN_FLAG should be replaced with SYSTEM_INVISIBLE (or COMPLETELY_INVISIBLE?).
Instead of updating global counter, calculate Threads_running on the fly.
All threads having command != COM_SLEEP are included.
Behaviour changes:
Previously SHOW STATUS and SHOW GLOBAL STATUS returned the same values
representing global status. Now SHOW STATUS always returns 1 indicating that
current session has 1 thread running.
Previously only threads that were executing dispatch_command() or running events
were accounted by Threads_running. Now it is rough equivalent of
SELECT COUNT(*) FROM INFORMATION_SCHEMA.PROCESSLIST WHERE state!='Sleep'
LOCK_thd_data was used to protect both THD data and
ensure that the THD is not deleted while it was in use
This patch moves the THD delete protection to LOCK_thd_kill,
which already protects the THD for kill.
The benefits are:
- More well defined what LOCK_thd_data protects
- LOCK_thd_data usage is now much simpler and easier to verify
- Less chance of deadlocks in SHOW PROCESS LIST as there is less
chance of interactions between mutexes
- Remove not needed LOCK_thread_count from
thd_get_error_context_description()
- Fewer mutex taken for thd->awake()
Other things:
- Don't take mysys->var mutex in show processlist to check if thread
is kill marked
- thd->awake() now automatically takes the LOCK_thd_kill mutex
(Simplifies code)
- Apc uses LOCK_thd_kill instead of LOCK_thd_data
- Remove not used thd_rpl_is_parallel()
- Remove not used mysql_notify_thread_having_shared_lock()
- Remove not needed LOCK_thread_count from MYSQL_BIN_LOG::reset_logs()
- LOCK_thread_count is not protecting against rollback, so this
code and comment is not needed
- Remove mutex_locks in slave.cc that are not needed.
Added THD::assert_not_linked() to ensure that it was safe to remove
- Fixed not repeatable test load_data_stmt_view
- Updated binlog_killed to test removal of mutex
(thanks to Andrei Elkin for test)
- More code comments
THD::vers_update_trt, trx_t::vers_update_trt, trx_savept_t::vers_update_trt:
Remove. Instead, determine from trx_t::mod_tables whether versioned
columns were affected by the transaction.
handlerton::prepare_commit_versioned: Replaces vers_get_trt_data.
Return the transaction start ID and also the commit ID, in case
the transaction modified any system-versioned columns (0 if not).
TR_table::store_data(): Remove (merge with update() below).
TR_table::update(): Add the parameters start_id, end_id.
ha_commit_trans(): Remove a condition on SQLCOM_ALTER_TABLE.
If we need something special for ALTER TABLE...ALGORITHM=INPLACE,
that can be done inside InnoDB by modifying trx_t::mod_tables.
innodb_prepare_commit_versioned(): Renamed from innodb_get_trt_data().
Check trx_t::mod_tables to see if any changes to versioned columns
are present.
trx_mod_table_time_t: A pair of logical timestamps, replacing the
undo_no_t in trx_mod_tables_t. Keep track of not only the first
modification to a persistent table in each transaction, but also
the first modification of a versioned column in a table.
dtype_t, dict_col_t: Add the accessor is_any_versioned(), to check
if the type refers to a system-versioned user or system column.
upd_t::affects_versioned(): Check if an update affects a versioned
column.
trx_undo_report_row_operation(): If a versioned column is affected
by the update, invoke trx_mod_table_time_t::set_versioned().
trx_rollback_to_savepoint_low(): If all changes to versioned columns
were rolled back, invoke trx_mod_table_time_t::rollback_versioned(),
so that trx_mod_table_time_t::is_versioned() will no longer hold.
* changed thd_binlog_format to return configured binlog format in wsrep execution,
regardless of binlogging setting (i.e. with or without binlogging)
* thd_binlog_format is used in innobase::write_row(), and would return confusing
result there when log_bin==OFF
- Fix win64 pointer truncation warnings
(usually coming from misusing 0x%lx and long cast in DBUG)
- Also fix printf-format warnings
Make the above mentioned warnings fatal.
- fix pthread_join on Windows to set return value.
* changed thd_binlog_format to return configured binlog format in wsrep execution,
regardless of binlogging setting (i.e. with or without binlogging)
* thd_binlog_format is used in innobase::write_row(), and would return confusing
result there when log_bin==OFF
- Added missing delete thd in bootstrap()
- Delete wrong 'delete thd' in start_wsrep_THD()
- Added missing 'delete thd' in case of SCHEDULER_ONE_THREAD_PER_CONNECTION
- Delete wrong dec_thread_running() in destroy_thd() as it caused thread_running
to be wrong.
- Moved reset_killed() to a normal function to make it easier to debug
- Added check of mutex in wsrep_aborting_thd... functions
Was reported as 'rpl.rpl_gtid_stop_start fails with Valgrind in buildbot and outside'.
The 'Conditional jump or move depends on uninitialized value' valgrind complaint is valid
and means THD::m_current_stage_key that is not initialized indeed by constructor.
Fixed with its initialization added to the initializer list of
THD::THD. Double checked with mysql to have found a similar fixes for
the very same issue which was discovered after P_S merge to Maria
(60589aeee where the member is introduced) had been done.
For running the Galera tests, the variable my_disable_leak_check
was set to true in order to avoid assertions due to memory leaks
at shutdown.
Some adjustments due to MDEV-13625 (merge InnoDB tests from MySQL 5.6)
were performed. The most notable behaviour changes from 10.0 and 10.1
are the following:
* innodb.innodb-table-online: adjustments for the DROP COLUMN
behaviour change (MDEV-11114, MDEV-13613)
* innodb.innodb-index-online-fk: the removal of a (1,NULL) record
from the result; originally removed in MySQL 5.7 in the
Oracle Bug #16244691 fix
377774689b
* innodb.create-index-debug: disabled due to MDEV-13680
(the MySQL Bug #77497 fix was not merged from 5.6 to 5.7.10)
* innodb.innodb-alter-autoinc: MariaDB 10.2 behaves like MySQL 5.6/5.7,
while MariaDB 10.0 and 10.1 assign different values when
auto_increment_increment or auto_increment_offset are used.
Also MySQL 5.6/5.7 exhibit different behaviour between
LGORITHM=INPLACE and ALGORITHM=COPY, so something needs to be tested
and fixed in both MariaDB 10.0 and 10.2.
* innodb.innodb-wl5980-alter: disabled because it would trigger an
InnoDB assertion failure (MDEV-13668 may need additional effort in 10.2)
This fixes MDEV-7742 and MDEV-8305 (Allow user to specify if stored
procedures should be logged in the slow and general log)
New functionality:
- Added new variables log_slow_disable_statements and log_disable_statements
that can be used to disable logging of certain queries to slow and
general log. Currently supported options are 'admin', 'call', 'slave'
and 'sp'.
Defaults are as before. Only 'sp' (stored procedure statements) is
disabled for slow and general_log.
- Slow log to files now includes the following new information:
- When logging stored procedure statements the name of stored
procedure is logged.
- Number of created tmp_tables, tmp_disk_tables and the space used
by temporary tables.
- When logging 'call', the logged status now contains the sum of all
included statements. Before only 'time' was correct.
- Added filsort_priority_queue as an option for log_slow_filter (this
variable existed before, but was not exposed)
- Added support for BIT types in my_getopt()
Mapped some old variables to bitmaps (old variables can still be used)
- Variable 'log_queries_not_using_indexes' is mapped to
log_slow_filter='not_using_index'
- Variable 'log_slow_slave_statements' is mapped to
log_slow_disabled_statements='slave'
- Variable 'log_slow_admin_statements' is mapped to
log_slow_disabled_statements='admin'
- All the above variables are changed to session variables from global
variables
Other things:
- Simplified LOGGER::log_command. We don't need to check for super if
OPTION_LOG_OFF is set as this flag can only be set if one is a super
user.
- Removed some setting of enable_slow_log as it's guaranteed to be set by
mysql_parse()
- mysql_admin_table() now sets thd->enable_slow_log
- Added prepare_logs_for_admin_command() to reset thd->enable_slow_log if
needed.
- Added new functions to store, restore and add slow query status
- Added new functions to store and restore query start time
- Reorganized Sub_statement_state according to types
- Added code in dispatch_command() to ensure that
thd->reset_for_next_command() is always called for a query.
- Added thd->last_sql_command to simplify checking of what was the type
of the last command. Needed when logging to slow log as lex->sql_command
may have changed before slow logging is called.
- Moved QPLAN_TMP_... to where status for tmp tables are updated
- Added new THD variable, affected_rows, to be able to correctly log
number of affected rows to slow log.
If compiling a non DBUG binary with
-DDBUG_ASSERT_AS_PRINTF asserts will be
changed to printf + stack trace (of stack
trace are enabled).
- Changed #ifndef DBUG_OFF to
#ifdef DBUG_ASSERT_EXISTS
for those DBUG_OFF that was just used to enable
assert
- Assert checking that could greatly impact
performance where changed to DBUG_ASSERT_SLOW which
is not affected by DBUG_ASSERT_AS_PRINTF
- Added one extra option to my_print_stacktrace() to
get more silent in case of stack trace printing as
part of assert.
- Added TABLE_SHARE->not_usable_by_query_cache
- Moved TABLE->no_replicate to TABLE_SHARE->no_replicate as it's same for
all TABLE instances
- Renamed TABLE_SHARE->cached_row_logging_check to can_do_row_logging
- Added sql/mariadb.h file that should be included first by files in sql
directory, if sql_plugin.h is not used (sql_plugin.h adds SHOW variables
that must be done before my_global.h is included)
- Removed a lot of include my_global.h from include files
- Removed include's of some files that my_global.h automatically includes
- Removed duplicated include's of my_sys.h
- Replaced include my_config.h with my_global.h
Merged from mysql-wsrep-bugs following:
GCF-1058 MTR test galera.MW-86 fails on repeated runs
Wait for the sync point sync.wsrep_apply_cb to be reached before
executing the test and clearing the debug flag sync.wsrep_apply_cb.
The race scenario:
Intended behavior:
node2: set sync.wsrep_apply_cb in order to start waiting in the background INSERT
node1: INSERT start
node2 (background): INSERT start
node1: INSERT end
node2: send signal to background INSERT: "stop waiting and continue executing"
node2: clear sync.wsrep_apply_cb as no longer needed
node2 (background): consume the signal
node2 (background): INSERT end
node2: DROP TABLE
node2: check no pending signals are left - ok
What happens occasionally (unexpected):
node2: set sync.wsrep_apply_cb in order to start waiting in the background INSERT
node1: INSERT start
node2 (background): INSERT start
node1: INSERT end
// The background INSERT still has _not_ reached the place where it starts
// waiting for the signal:
// DBUG_EXECUTE_IF("sync.wsrep_apply_cb", "now wait_for...");
node2: send signal to background INSERT: "stop waiting and continue executing"
node2: clear sync.wsrep_apply_cb as no longer needed
// The background INSERT reaches DBUG_EXECUTE_IF("sync.wsrep_apply_cb", ...)
// but sync.wsrep_apply_cb has already been cleared and the "wait" code is not
// executed. The signal remains unconsumed.
node2 (background): INSERT end
node2: DROP TABLE
node2: check no pending signals are left - failure, signal.wsrep_apply_cb is
pending (not consumed)
Remove MW-360 test case as it is not intended for MariaDB (uses
MySQL GTID).
The problem was that the introduction of max-thread-mem-used can cause
an allocation error very early, even before mysql_parse() is called.
As mysql_parse() calls thd->reset_for_next_command(), which called
clear_error(), the error number was lost.
Fixed by adding an option to have unique messages for each KILL
signal and change max-thread-mem-used to use this new feature.
This removes a lot of problems with the original approach, where
one could get errors signaled silenty almost any time.
ixed by moving clear_error() from reset_for_next_command() to
do_command(), before any memory allocation for the thread.
Related changes:
- reset_for_next_command() now have an optional parameter if we should
call clear_error() or not. By default it's called, but not anymore from
dispatch_command() which was the original problem.
- Added optional paramater to clear_error() to force calling of
reset_diagnostics_area(). Before clear_error() only called
reset_diagnostics_area() if there was no error, so we normally
called reset_diagnostics_area() twice.
- This change removed several duplicated calls to clear_error()
when starting a query.
- Reset max_mem_used on COM_QUIT, to protect against kill during
quit.
- Use fatal_error() instead of setting is_fatal_error (cleanup)
- Set fatal_error if max_thead_mem_used is signaled.
(Same logic we use for other places where we are out of resources)
Change the semantics of thd_get_error_context_description().
It no longer expects the caller to lock LOCK_thread_count
(no caller ever did that anyway), but takes care of it internally.
