diff --git a/CHANGELOG.md b/CHANGELOG.md
deleted file mode 100644
index 506bf1de..00000000
--- a/CHANGELOG.md
+++ /dev/null
@@ -1,17 +0,0 @@
-# KeytechWebInterface - Change Log
-
-All notable changes to this project will be documented in this file.
-This project adheres to [Semantic Versioning](https://semver.org/).
-
-## [0.1.0] - Start
-
-ℹ️ **Note:**
-
-### Added
-
-### Updated
-
-### Deleted
-
-
-### Fixed
diff --git a/README.md b/README.md
index 3cff94cc..fe69eae3 100644
--- a/README.md
+++ b/README.md
@@ -1,35 +1,22 @@
# HomeLab
-Scripts used for starting my HomeLab stuff, either from scratch or moving between machines.
-### Situation
+Scripts used for starting my HomeLab stuff,
+***
-### Task
+## Files and Directories
+### ansible/
+Ansible playbooks to (re-)build systems, like a personal rig, a HTPC or even the VPS.
+Used to get systems to a consistent state
-### Result
+### bashScripts/
+Scripts that are (sometimes) useful.
+***
-### Note
-
-### ToDo
-- Configure .env-fireflyiii
-- Add Ansible deployment basics
-- Change to single config.sh
-- Add limit to backup files
-- Automatic Backup from used Images
+## ToDo
+- [ ] Add VPS role to ansible playbook
-Ps.: Feel free to improve :)
-
-
-## Some Statistics
-
-
-
-
-
-
-
-
-
+Ps.: Feel free to improve :)
\ No newline at end of file
diff --git a/homelab.md b/homelab.md
deleted file mode 100644
index ff4e5c2b..00000000
--- a/homelab.md
+++ /dev/null
@@ -1,83 +0,0 @@
-# HomeLab Notes
-## Objectives
-- Reduce VPS cost
-- Add security to personal selfhosted services via VPN ()
-- Simplify re-deployment and improve independency
-- Automatic Maintenance and Notification
-
-# Requirements
-
-## Equipment
-ℹ️ [local]
-- Perseverance - Main Server
- - CPU:
- - RAM: 16 GB
- - OS: Debian
- - Storage:
-- Curiosity - RaspberryPi 4
- - CPU:
- - RAM: 4 GB
- - OS: Debian - 64 GB SSD
- - Storage: RAID1 - 120 GB SSD
-- Possibility: Another RaspberryPi 4
-
-ℹ️ [remote]
-- Opportunity - Main VPS - Linode
- - CPU:
- - RAM: 1 GB
- - OS: Debian - 10GB SSD
- - Storage:
-- Pathfinder - VPS - Hetznet
- - CPU:
- - RAM: 4 GB
- - OS:
- - Storage:
-
-## PoC
-ℹ️ [remote]
-- Opportunity - Main VPS
- - Docker:
- - [ ] VPN Server - OpenVPN
- - :heavy_check_mark: Budget - FireflyIII
- - :heavy_check_mark: Wiki - DokuWiki
- - :heavy_check_mark: Website - Wordpress3
- - :heavy_check_mark: Books - Ubooquity
- - :heavy_check_mark: Container Manager - Portainer
- - [ ] Project Management - Leantime
- - :heavy_check_mark: Reverse Proxy - Traefik
- - :heavy_check_mark: PP - Travel Map
-
-- Pathfinder - VPS - Hetznet
- - Docker:
- - :heavy_check_mark: Game Server - Valheim
-
-ℹ️ [local]
-- Curiosity - RaspberryPi 4
- - Docker:
- - [ ] PRM - Monica
- - [ ] VPN Client - OpenVPN
- - [ ] Configuration Management - Ansible
- - [ ] Git - Git
- - [ ] DNS Server -
- - [ ] Reverse Proxy - Traefik
- - [ ] (Synced from Opportunity) Budget - FireflyIII
- - [ ] (Synced from Opportunity) Wiki - DokuWiki
- - [ ] (Synced from Opportunity) Website - Wordpress3
- - [ ] (Synced from Opportunity) Books - Ubooquity
- - [ ] (Synced from Opportunity) Container Manager - Portainer
- - [ ] (Synced from Opportunity) Project Management - Leantime
- - [ ] (Synced from Opportunity) PP - Travel Map
-
-- Perseverance - Main Server
- - VM:
- - [ ] NAS - TrueCore
-
-## Usage
-- [ ] Opportunity serves public available services eg: Website, Wiki, VPN Server
-- [ ] Opportunity connects Client via VPN to Curiosity for serving private services eg: Budget, Git, PRM
-- [ ] Perseverance serves files to local network
-
-## Backup
-- [ ] Curiosity pulls from Opportunity
-- [ ] Perseverance pulls from Curiosity
-- [ ] Perseverance pushes to BackBlaze B2 / Google Drive
diff --git a/systems/Ubuntu-Server/Scripts/install-docker.sh b/systems/Ubuntu-Server/Scripts/install-docker.sh
deleted file mode 100644
index bf8d0a43..00000000
--- a/systems/Ubuntu-Server/Scripts/install-docker.sh
+++ /dev/null
@@ -1,4 +0,0 @@
-sudo apt update -y && \
-sudo apt upgrade -y && \
-sudo apt install docker -y && \
-sudo apt install docker-compose -y
diff --git a/systems/archDaily/001deploy.sh b/systems/archDaily/001deploy.sh
deleted file mode 100644
index 4aa18c93..00000000
--- a/systems/archDaily/001deploy.sh
+++ /dev/null
@@ -1,78 +0,0 @@
-#!/bin/bash
-clear
-LOGLOCATION=/root/log.txt
-
-
-echo ":: Change keyboard layout to DE"
-loadkeys de-latin1
-
-echo ":: Change Timezone to Berlin"
-# #[TODO] Should be asked from user
-timedatectl set-timezone Europe/Berlin
-timedatectl set-ntp true
-
-fdisk -l
-
-echo ":: Enter disk to be used "
-echo ":: Eg: /dev/vda"
-read disk
-
-echo "New Hostname? "
-echo "Eg: bsa200arch"
-read newhostname
-echo "Local Domain?"
-echo "Eg: local"
-read newdomain
-echo "Main User?"
-echo "Eg: csa"
-read newuserid
-
-#echo "set a password for root "
-#passwd
-
-
-# Create the Paritions
-fdisk ${disk} < fdisk_cmds
-#gdisk ${disk} < gdisk_cmds
-
-# Format parition and prepares swap
-mkfs.ext4 ${disk}2 &> ${LOGLOCATION}
-mkswap ${disk}1 &> ${LOGLOCATION}
-
-# Mount the Filesystem
-mount ${disk}2 /mnt &> ${LOGLOCATION}
-swapon ${disk}1 &> ${LOGLOCATION}
-
-# Install Essential Packages
-pacstrap /mnt base linux linux-firmware
-
-# Generate the fstab File
-genfstab -U /mnt >> /mnt/etc/fstab
-
-# Set TimeZone
-arch-chroot /mnt timedatectl set-timezone Europe/Berlin
-
-# Create locale.conf and set LANG Variable
-echo "LANG=en_US.UTF-8" > /mnt/etc/locale.conf
-
-# Set Keyboard Layout
-echo "KEYMAP=de-latin1" > /mnt/etc/vconsole.conf
-
-# Generate the new locales
-arch-chroot /mnt locale-gen
-
-# Setting hostname
-echo ${newhostname} > /mnt/etc/hostname
-
-# Adding entries to hosts(5)
-echo "127.0.0.1 localhost" >> /mnt/etc/hosts
-echo "::1 localhost" >> /mnt/etc/hosts
-echo "127.0.1.1 ${newhostname}.${newdomain} ${newhostname}" >> /mnt/etc/hosts
-
-systemctl enable dhcpcd
-arch-chroot /mnt passwd
-
-# Install Grub Bootloader
-arch-chroot /mnt pacman -Sy grub os-prober --noconfirm -q
-arch-chroot /mnt grub-install ${disk}
-arch-chroot /mnt grub-mkconfig -o /boot/grub/grub.cfg
diff --git a/systems/archDaily/002installBasics.sh b/systems/archDaily/002installBasics.sh
deleted file mode 100644
index ad8d4b0c..00000000
--- a/systems/archDaily/002installBasics.sh
+++ /dev/null
@@ -1,10 +0,0 @@
-#!/bin/bash
-
-arch-chroot /mnt pacman -Sy curl \
- htop \
- tmux \
- xfce4 \
- xfwm4 \
- xfce4-panel \
- xfce4-terminal \
- --noconfirm -q
diff --git a/systems/archDaily/fdisk_cmds b/systems/archDaily/fdisk_cmds
deleted file mode 100644
index 95838079..00000000
--- a/systems/archDaily/fdisk_cmds
+++ /dev/null
@@ -1,21 +0,0 @@
-o
-n
-p
-1
-
-+4G
-y
-t
-swap
-n
-p
-2
-
-
-y
-t
-2
-linux
-a
-2
-w
diff --git a/systems/curiosity/README.md b/systems/curiosity/README.md
deleted file mode 100644
index 4b4418f1..00000000
--- a/systems/curiosity/README.md
+++ /dev/null
@@ -1,17 +0,0 @@
-# HomeLab
-Scripts used for starting my HomeLab stuff, either from scratch or moving between machines.
-
-### Situation
-
-
-### Task
-- Make a copy of every *-sample without "-sample"
- - eg: authorized_keys-sample = authorized_keys
-- Edit the values in those files
-
-### Result
-
-
-### Note
-
-### ToDo
diff --git a/systems/curiosity/docker-user/.ssh/authorized_keys-sample b/systems/curiosity/docker-user/.ssh/authorized_keys-sample
deleted file mode 100644
index 1d900659..00000000
--- a/systems/curiosity/docker-user/.ssh/authorized_keys-sample
+++ /dev/null
@@ -1,5 +0,0 @@
-# curiosity
-ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCpqC2Zn9RUPYBwXI7kBkTx5/5ZfwDy5ynudQ7KpzV28r9JiLHxDYlBleZDceINVDFkHVltmYTqwc3ZsmSHQhKhwfSyctwK8i/Q2FBu24fRbrUFEj/ov6RjV+nR+3RIhvsVVwKqzSimWMYD/QTllTn8EZvCz2qx5wLr2BTQx9kfWnYDQQPTgNs/2WWTpud/8/VTpC9geT0nxZw4so9PIC9spvFg15pnq+68fIVd2lkP7PqtAofVLZ22mR5h9F9RCx778GeYTRfllRT6G1pDcpD+VRDFHKWCu63Og0HD3keO+4lhWC1P43IT0ugGQgHzxIAZgOPUuYl2p295IuQ5UlGx rsync@rpi4-20210210
-# Zebramain
-ssh-rsa AAAAB3NzaC1yc2EAAAABJQAAAgEAioYuCHGU8Gf3GfR1YZz8B3nvriGNvYmNmWew7xls+e+vwITuHOxSahD4Xdj5m1o4TE6cMxpLKZ5FQCWYpLzRjUPg2E0n/9LpKq/g1wBGPQLSgryfth2xZMwI2ya3s9+hG33koCH3yXZLgXqtCAn3vj3Gxx37MvclFdeXaFIIr+IMbTvQ+jFCCrOy507+ujkEUsv9AfJzMw0wq14ySSRo5iA9+vjGZRr2HwVQl29C/XFIcoczoiKI216uWmvfO6OFW2EH3vIMyyCcTtjsZeJ9oiil6fYflQgYRYGKePyj/NzN1n9qT08gAR/+yw9B/C9lUuBkMbjDLPj25eg+fL5NFe+AKLF6MTwnxoBQtwqb/Minw6y9i0fiwoNNQn17g3wmFk6qklPzM2zFBPYdpvy4HLCaw+3UMdTA5o9Uc8Cfqs9h2h0xn6iHdvr5gjNDMy8Oibp7j5kpx/V85WpMxA3A+xiOm/yAeQDHKWvPpot1mOmcLHoEI1GMfLOBSCGLtKNfoaQF2Gh2Wdy4vStMWXTJiMJPNGD7kiiMXmIdsKeAOllTaQ+Of2X8of6NiRBfT8wBSaPSBFJOZpSr8jPeif8j8UUqNII5t4KbrKMn53wrCRwvN3gOmmD9GfUbcpra2UTAXHD/jto5EJK6A+u2sUQxRyTYAH1lqOKZKXkCZw1wBzs= rsa-key-20210305
-
diff --git a/systems/curiosity/docker-user/backupOpportunity.sh b/systems/curiosity/docker-user/backupOpportunity.sh
deleted file mode 100644
index d8c5c767..00000000
--- a/systems/curiosity/docker-user/backupOpportunity.sh
+++ /dev/null
@@ -1,12 +0,0 @@
-#!/bin/bash
-
-# Don't forget to add the script to anacron for automatic sync
-# sudo nano /etc/anacrontab
-# Run Every Day / If not executed wait 15 minutes after system boot / Unique Name / Script Location
-# 1 15 backupOpportunity.daily /bin/sh /home/docker-user/backupOpportunity.sh
-
-
-. /home/docker-user/config.sh
-mkdir -p $BACKTO/$(date +%F)
-find "$BACKFROM" -maxdepth 1 -mindepth 1 -type d \
- -execdir tar -cf "$BACKTO/$(date +%F)/"{}-$(date +"%Y-%m-%d--%H-%M").tar {} \;
diff --git a/systems/curiosity/docker-user/backupRotation.sh b/systems/curiosity/docker-user/backupRotation.sh
deleted file mode 100644
index fe287a8e..00000000
--- a/systems/curiosity/docker-user/backupRotation.sh
+++ /dev/null
@@ -1,14 +0,0 @@
-#!/bin/bash
-
-# Don't forget to add the script to anacron for automatic sync
-# sudo nano /etc/anacrontab
-# Run Every Day / If not executed wait 15 minutes after system boot / Unique Name / Script Location
-# 1 15 backupOpportunity.daily /bin/sh /home/docker-user/backupOpportunity.sh
-
-
-. /home/docker-user/config.sh
-mkdir -p $BACKTO/$(date +%F)
-find "$BACKFROM" -maxdepth 1 -mindepth 1 -type d \
- -execdir tar -cf "$BACKTO/$(date +%F)/"{}-$(date +"%Y-%m-%d--%H-%M").tar {} \;
-
-# ls -dt */ | tail -n +11 | xargs rm -rf
diff --git a/systems/curiosity/docker-user/compose/.env-fireflyiii-sample b/systems/curiosity/docker-user/compose/.env-fireflyiii-sample
deleted file mode 100644
index e332ebab..00000000
--- a/systems/curiosity/docker-user/compose/.env-fireflyiii-sample
+++ /dev/null
@@ -1,340 +0,0 @@
-# You can leave this on "local". If you change it to production most console commands will ask for extra confirmation.
-# Never set it to "testing".
-APP_ENV=local
-
-# Set to true if you want to see debug information in error screens.
-APP_DEBUG=false
-
-# This should be your email address.
-# If you use Docker or similar, you can set this variable from a file by using SITE_OWNER_FILE
-SITE_OWNER=mail@example.com
-
-# The encryption key for your sessions. Keep this very secure.
-# Change it to a string of exactly 32 chars or use something like `php artisan key:generate` to generate it.
-# If you use Docker or similar, you can set this variable from a file by using APP_KEY_FILE
-APP_KEY=SomeRandomStringOf32CharsExactly
-
-# Firefly III will launch using this language (for new users and unauthenticated visitors)
-# For a list of available languages: https://github.com/firefly-iii/firefly-iii/tree/main/resources/lang
-#
-# If text is still in English, remember that not everything may have been translated.
-DEFAULT_LANGUAGE=en_US
-
-# The locale defines how numbers are formatted.
-# by default this value is the same as whatever the language is.
-DEFAULT_LOCALE=equal
-
-# Change this value to your preferred time zone.
-# Example: Europe/Amsterdam
-# For a list of supported time zones, see https://en.wikipedia.org/wiki/List_of_tz_database_time_zones
-TZ=Europe/Amsterdam
-
-# TRUSTED_PROXIES is a useful variable when using Docker and/or a reverse proxy.
-# Set it to ** and reverse proxies work just fine.
-TRUSTED_PROXIES=
-
-# The log channel defines where your log entries go to.
-# Several other options exist. You can use 'single' for one big fat error log (not recommended).
-# Also available are 'syslog', 'errorlog' and 'stdout' which will log to the system itself.
-# A rotating log option is 'daily', creates 5 files that (surprise) rotate.
-# Default setting 'stack' will log to 'daily' and to 'stdout' at the same time.
-
-# - Docker + versions <= 4.8.1.8 and before: use "stdout"
-# - Docker + versions > 4.8.1.8 : use "docker_out"
-# - Docker + versions >= 5.1.1 : use "stack"
-# - For everything else (als not Docker) : use 'stack'
-
-LOG_CHANNEL=stack
-
-# Log level. You can set this from least severe to most severe:
-# debug, info, notice, warning, error, critical, alert, emergency
-# If you set it to debug your logs will grow large, and fast. If you set it to emergency probably
-# nothing will get logged, ever.
-APP_LOG_LEVEL=notice
-
-# Audit log level.
-# set to "emergency" if you dont want to store audit logs.
-# leave on info otherwise.
-AUDIT_LOG_LEVEL=info
-
-# Database credentials. Make sure the database exists. I recommend a dedicated user for Firefly III
-# For other database types, please see the FAQ: https://docs.firefly-iii.org/support/faq
-# If you use Docker or similar, you can set these variables from a file by appending them with _FILE
-# Use "pgsql" for PostgreSQL
-# Use "mysql" for MySQL and MariaDB.
-# Use "sqlite" for SQLite.
-DB_CONNECTION=mysql
-DB_HOST=fireflyiiidb
-DB_PORT=3306
-DB_DATABASE=firefly
-DB_USERNAME=firefly
-DB_PASSWORD=secret_firefly_password
-
-# MySQL supports SSL. You can configure it here.
-# If you use Docker or similar, you can set these variables from a file by appending them with _FILE
-MYSQL_USE_SSL=false
-MYSQL_SSL_VERIFY_SERVER_CERT=true
-# You need to set at least of these options
-MYSQL_SSL_CAPATH=/etc/ssl/certs/
-MYSQL_SSL_CA=
-MYSQL_SSL_CERT=
-MYSQL_SSL_KEY=
-MYSQL_SSL_CIPHER=
-
-# PostgreSQL supports SSL. You can configure it here.
-# If you use Docker or similar, you can set these variables from a file by appending them with _FILE
-PGSQL_SSL_MODE=prefer
-PGSQL_SSL_ROOT_CERT=null
-PGSQL_SSL_CERT=null
-PGSQL_SSL_KEY=null
-PGSQL_SSL_CRL_FILE=null
-
-# If you're looking for performance improvements, you could install memcached.
-CACHE_DRIVER=file
-SESSION_DRIVER=file
-
-# If you set either of these to 'redis', you might want to update these settings too
-# If you use Docker or similar, you can set REDIS_HOST_FILE, REDIS_PASSWORD_FILE or
-# REDIS_PORT_FILE to set the value from a file instead of from an environment variable
-
-# can be tcp, unix or http
-REDIS_SCHEME=tcp
-
-# use only when using 'unix' for REDIS_SCHEME. Leave empty otherwise.
-REDIS_PATH=
-
-# use only when using 'tcp' or 'http' for REDIS_SCHEME. Leave empty otherwise.
-REDIS_HOST=127.0.0.1
-REDIS_PORT=6379
-
-REDIS_PASSWORD=null
-# always use quotes and make sure redis db "0" and "1" exists. Otherwise change accordingly.
-REDIS_DB="0"
-REDIS_CACHE_DB="1"
-
-# Cookie settings. Should not be necessary to change these.
-# If you use Docker or similar, you can set COOKIE_DOMAIN_FILE to set
-# the value from a file instead of from an environment variable
-COOKIE_PATH="/"
-COOKIE_DOMAIN=
-COOKIE_SECURE=false
-COOKIE_SAMESITE=lax
-
-# If you want Firefly III to mail you, update these settings
-# For instructions, see: https://docs.firefly-iii.org/advanced-installation/email
-# If you use Docker or similar, you can set these variables from a file by appending them with _FILE
-MAIL_MAILER=log
-MAIL_HOST=null
-MAIL_PORT=2525
-MAIL_FROM=changeme@example.com
-MAIL_USERNAME=null
-MAIL_PASSWORD=null
-MAIL_ENCRYPTION=null
-
-# Other mail drivers:
-# If you use Docker or similar, you can set these variables from a file by appending them with _FILE
-MAILGUN_DOMAIN=
-MAILGUN_SECRET=
-
-
-# If you are on EU region in mailgun, use api.eu.mailgun.net, otherwise use api.mailgun.net
-# If you use Docker or similar, you can set this variable from a file by appending it with _FILE
-MAILGUN_ENDPOINT=api.mailgun.net
-
-# If you use Docker or similar, you can set these variables from a file by appending them with _FILE
-MANDRILL_SECRET=
-SPARKPOST_SECRET=
-
-# Firefly III can send you the following messages
-SEND_REGISTRATION_MAIL=true
-SEND_ERROR_MESSAGE=true
-SEND_LOGIN_NEW_IP_WARNING=true
-
-# These messages contain (sensitive) transaction information:
-SEND_REPORT_JOURNALS=true
-
-# Set a Mapbox API key here (see mapbox.com) so there might be a map available at various places.
-# If you use Docker or similar, you can set this variable from a file by appending it with _FILE
-MAPBOX_API_KEY=
-
-# The map will default to this location:
-MAP_DEFAULT_LAT=51.983333
-MAP_DEFAULT_LONG=5.916667
-MAP_DEFAULT_ZOOM=6
-
-# Firefly III has two options for user authentication. "eloquent" is the default,
-# and "ldap" for LDAP servers.
-# For full instructions on these settings please visit:
-# https://docs.firefly-iii.org/advanced-installation/authentication
-# If you use Docker or similar, you can set this variable from a file by appending it with _FILE
-LOGIN_PROVIDER=eloquent
-
-# It's also possible to change the way users are authenticated. You could use Authelia for example.
-# Authentication via the REMOTE_USER header is supported. Change the value below to "remote_user_guard".
-#
-# This will also allow Windows SSO.
-#
-# If you do this please read the documentation for instructions and warnings:
-# https://docs.firefly-iii.org/advanced-installation/authentication
-#
-# This function is available in Firefly III v5.3.0 and higher.
-AUTHENTICATION_GUARD=web
-
-# If the guard is changed, Firefly III uses the 'REMOTE_USER' header as per RFC 3875.
-# You can also use another header, like AUTH_USER when using Windows SSO.
-# Some systems use X-Auth headers. In that case, use HTTP_X_AUTH_USERNAME or HTTP_X_AUTH_EMAIL
-# Depending on your system, REMOTE_USER may need to be changed to HTTP_REMOTE_USER
-#
-# If this header is 'unexpectedly empty', check out the documentation.
-# https://docs.firefly-iii.org/advanced-installation/authentication
-#
-AUTHENTICATION_GUARD_HEADER=REMOTE_USER
-
-#
-# Firefly III uses email addresses as user identifiers. When you're using an external authentication guard
-# that doesn't do this, Firefly III is incapable of emailing you. Messages sent to "Bill Gates" always fail.
-#
-# However, if you set this value, Firefly III will store the value from this header as the user's backup
-# email address and use it to communicate. So user "Bill Gates" could still have
-# the email address "bill@microsoft.com".
-#
-# Example value: AUTHENTICATION_GUARD_EMAIL=HTTP_X_AUTH_EMAIL
-#
-AUTHENTICATION_GUARD_EMAIL=
-
-
-# It's impossible to log out users who's authentication is handled by an external system.
-# Enter a custom URL here that will force a logout (your authentication provider can tell you).
-# Setting this variable only works when AUTHENTICATION_GUARD != web
-#
-CUSTOM_LOGOUT_URI=
-
-# LDAP connection configuration
-# OpenLDAP, FreeIPA or ActiveDirectory
-# # If you use Docker or similar, you can set this variable from a file by appending it with _FILE
-ADLDAP_CONNECTION_SCHEME=OpenLDAP
-ADLDAP_AUTO_CONNECT=true
-
-# LDAP connection settings
-# You can set the following variables from a file by appending them with _FILE:
-# ADLDAP_CONTROLLERS, ADLDAP_PORT, ADLDAP_BASEDN
-ADLDAP_CONTROLLERS=
-ADLDAP_PORT=389
-ADLDAP_TIMEOUT=5
-ADLDAP_BASEDN=""
-ADLDAP_FOLLOW_REFFERALS=false
-
-# SSL/TLS settings
-ADLDAP_USE_SSL=false
-ADLDAP_USE_TLS=false
-ADLDAP_SSL_CACERTDIR=
-ADLDAP_SSL_CACERTFILE=
-ADLDAP_SSL_CERTFILE=
-ADLDAP_SSL_KEYFILE=
-ADLDAP_SSL_CIPHER_SUITE=
-ADLDAP_SSL_REQUIRE_CERT=
-
-# You can set the following variables from a file by appending them with _FILE:
-ADLDAP_ADMIN_USERNAME=
-ADLDAP_ADMIN_PASSWORD=
-
-# You can set the following variables from a file by appending them with _FILE:
-ADLDAP_ACCOUNT_PREFIX=
-ADLDAP_ACCOUNT_SUFFIX=
-
-# LDAP authentication settings.
-ADLDAP_PASSWORD_SYNC=false
-ADLDAP_LOGIN_FALLBACK=false
-
-ADLDAP_DISCOVER_FIELD=distinguishedname
-ADLDAP_AUTH_FIELD=distinguishedname
-
-# field to sync as local username.
-# You can set the following variable from a file by appending it with _FILE:
-ADLDAP_SYNC_FIELD=userprincipalname
-
-# You can disable the X-Frame-Options header if it interferes with tools like
-# Organizr. This is at your own risk. Applications running in frames run the risk
-# of leaking information to their parent frame.
-DISABLE_FRAME_HEADER=false
-
-# You can disable the Content Security Policy header when you're using an ancient browser
-# or any version of Microsoft Edge / Internet Explorer (which amounts to the same thing really)
-# This leaves you with the risk of not being able to stop XSS bugs should they ever surface.
-# This is at your own risk.
-DISABLE_CSP_HEADER=false
-
-# If you wish to track your own behavior over Firefly III, set valid analytics tracker information here.
-# Nobody uses this except for me on the demo site. But hey, feel free to use this if you want to.
-# Do not prepend the TRACKER_URL with http:// or https://
-# The only tracker supported is Matomo.
-# You can set the following variables from a file by appending them with _FILE:
-TRACKER_SITE_ID=
-TRACKER_URL=
-
-# Firefly III can collect telemetry on how you use Firefly III. This is opt-in.
-# In order to allow this, change the following variable to true.
-# To read more about this feature, go to this page: https://docs.firefly-iii.org/support/telemetry
-SEND_TELEMETRY=false
-
-#
-# Firefly III supports webhooks. These are security sensitive and must be enabled manually first.
-#
-ALLOW_WEBHOOKS=false
-
-# You can fine tune the start-up of a Docker container by editing these environment variables.
-# Use this at your own risk. Disabling certain checks and features may result in lost of inconsistent data.
-# However if you know what you're doing you can significantly speed up container start times.
-# Set each value to true to enable, or false to disable.
-
-# Check if the SQLite database exists. Can be skipped if you're not using SQLite.
-# Won't significantly speed up things.
-DKR_CHECK_SQLITE=true
-
-# Run database creation and migration commands. Disable this only if you're 100% sure the DB exists
-# and is up to date.
-DKR_RUN_MIGRATION=true
-
-# Run database upgrade commands. Disable this only when you're 100% sure your DB is up-to-date
-# with the latest fixes (outside of migrations!)
-DKR_RUN_UPGRADE=true
-
-# Verify database integrity. Includes all data checks and verifications.
-# Disabling this makes Firefly III assume your DB is intact.
-DKR_RUN_VERIFY=true
-
-# Run database reporting commands. When disabled, Firefly III won't go over your data to report current state.
-# Disabling this should have no impact on data integrity or safety but it won't warn you of possible issues.
-DKR_RUN_REPORT=true
-
-# Generate OAuth2 keys.
-# When disabled, Firefly III won't attempt to generate OAuth2 Passport keys. This won't be an issue, IFF (if and only if)
-# you had previously generated keys already and they're stored in your database for restoration.
-DKR_RUN_PASSPORT_INSTALL=true
-
-# Leave the following configuration vars as is.
-# Unless you like to tinker and know what you're doing.
-APP_NAME=FireflyIII
-ADLDAP_CONNECTION=default
-BROADCAST_DRIVER=log
-QUEUE_DRIVER=sync
-CACHE_PREFIX=firefly
-PUSHER_KEY=
-PUSHER_SECRET=
-PUSHER_ID=
-DEMO_USERNAME=
-DEMO_PASSWORD=
-IS_HEROKU=false
-FIREFLY_III_LAYOUT=v1
-
-#
-# If you have trouble configuring your Firefly III installation, DON'T BOTHER setting this variable.
-# It won't work. It doesn't do ANYTHING. Don't believe the lies you read online. I'm not joking.
-# This configuration value WILL NOT HELP.
-#
-# This variable is ONLY used in some of the emails Firefly III sends around. Nowhere else.
-# So when configuring anything WEB related this variable doesn't do anything. Nothing
-#
-# If you're stuck I understand you get desperate but look SOMEWHERE ELSE.
-#
-APP_URL=http://localhost
diff --git a/systems/curiosity/docker-user/compose/.env-sample b/systems/curiosity/docker-user/compose/.env-sample
deleted file mode 100644
index 7aba80f7..00000000
--- a/systems/curiosity/docker-user/compose/.env-sample
+++ /dev/null
@@ -1,12 +0,0 @@
-# Storage Path for all services
-STORAGE_PATH=/mnt/raid1/docker
-
-# Heimdal Configuration
-# Assumes STORAGE_PATH as base
-HEIMDALCONFIG=/heimdal
-
-# FireflyIII Configuration
-# Assumes STORAGE_PATH as a base
-FIREFLYEXPORT=/fireflyiii/export
-FIREFLYUPLOAD=/fireflyiii/upload
-FIREFLYDB=/fireflyiii/db
\ No newline at end of file
diff --git a/systems/curiosity/docker-user/compose/create-storage.sh b/systems/curiosity/docker-user/compose/create-storage.sh
deleted file mode 100644
index 0848a11c..00000000
--- a/systems/curiosity/docker-user/compose/create-storage.sh
+++ /dev/null
@@ -1,3 +0,0 @@
-#!/bin/bash
-source .env
-mkdir -p "$STORAGE_PATH"/fireflyiii/{export,db,upload}
diff --git a/systems/curiosity/docker-user/compose/heimdal.yml b/systems/curiosity/docker-user/compose/heimdal.yml
deleted file mode 100644
index 318ce1d0..00000000
--- a/systems/curiosity/docker-user/compose/heimdal.yml
+++ /dev/null
@@ -1,15 +0,0 @@
-version: "2.1"
-services:
- heimdall:
- image: ghcr.io/linuxserver/heimdall
- container_name: heimdall
- environment:
- - PUID=1000
- - PGID=1000
- - TZ=Europe/Berlin
- volumes:
- - ${HEIMDALCONFIG}:/config
- ports:
- - 80:80
- - 443:443
- restart: unless-stopped
diff --git a/systems/curiosity/docker-user/config.sh-sample b/systems/curiosity/docker-user/config.sh-sample
deleted file mode 100644
index 161dc17e..00000000
--- a/systems/curiosity/docker-user/config.sh-sample
+++ /dev/null
@@ -1,3 +0,0 @@
-export BACKTO="Source of BackUp eg: /mnt/raid1/backups"
-export BACKFROM="Destination of BackUp eg: /mnt/raid1/opportunity-clone"
-export BACKMAX=5
diff --git a/systems/curiosity/rsync/.ssh/config-sample b/systems/curiosity/rsync/.ssh/config-sample
deleted file mode 100644
index c99b5a64..00000000
--- a/systems/curiosity/rsync/.ssh/config-sample
+++ /dev/null
@@ -1,4 +0,0 @@
-Host opportunity
- HostName 10.20.30.40
- User docker-user
- IdentityFile ~/.ssh/curiosity
diff --git a/systems/curiosity/rsync/config.sh-sample b/systems/curiosity/rsync/config.sh-sample
deleted file mode 100644
index 81e7df56..00000000
--- a/systems/curiosity/rsync/config.sh-sample
+++ /dev/null
@@ -1,5 +0,0 @@
-export TARGETUSER="remote user eg: docker-user"
-export TARGETIP="remote ip eg: 10.50.20.5"
-export TARGETFOLDER="folder to sync from eg: /home/docker-user/"
-export SOURCEKEY="RSA private key location eg: /home/rsync/.ssh/curiosity"
-export SOURCEFOLDER="destination folder eg: /mnt/raid1/opportunity-clone/"
diff --git a/systems/curiosity/rsync/syncFromOpportunity.sh b/systems/curiosity/rsync/syncFromOpportunity.sh
deleted file mode 100644
index 04856092..00000000
--- a/systems/curiosity/rsync/syncFromOpportunity.sh
+++ /dev/null
@@ -1,10 +0,0 @@
-#!/bin/bash
-
-# Don't forget to add the script to anacron for automatic sync
-# sudo nano /etc/anacrontab
-# Run Every Day / If not executed wait 15 minutes after system boot / Unique Name / Script Location
-# 1 15 syncFromOpportunity.daily /bin/sh /home/rsync/syncFromOpportunity.sh
-
-
-. ./home/rsync/config.sh
-rsync --progress -avz -e "ssh -i ${SOURCEKEY}" $TARGETUSER@$TARGETIP:$TARGETFOLDER $SOURCEFOLDER
diff --git a/systems/xubuntuDaily/ansible/README.md b/systems/xubuntuDaily/ansible/README.md
deleted file mode 100644
index 7e390b18..00000000
--- a/systems/xubuntuDaily/ansible/README.md
+++ /dev/null
@@ -1,18 +0,0 @@
-# Ansible
-Playbooks and ansible configs to deploy different systems
-
-### Situation
-
-
-### Task
-- Run the playbook
-```
-ansible-playbook deploy.yml
-```
-
-### Result
-
-
-### Note
-
-### ToDo
diff --git a/systems/xubuntuDaily/ansible/ansible.cfg b/systems/xubuntuDaily/ansible/ansible.cfg
deleted file mode 100644
index 00717e5b..00000000
--- a/systems/xubuntuDaily/ansible/ansible.cfg
+++ /dev/null
@@ -1,3 +0,0 @@
-[defaults]
-inventory = hosts
-log_path = /var/log/ansible.log
diff --git a/systems/xubuntuDaily/ansible/deploy.yml b/systems/xubuntuDaily/ansible/deploy.yml
deleted file mode 100644
index 89592669..00000000
--- a/systems/xubuntuDaily/ansible/deploy.yml
+++ /dev/null
@@ -1,21 +0,0 @@
----
-- hosts: localhost
- connection: local
- become: true
-
- tasks:
- - name: install packages
- package:
- name:
- - htop
- - keepass2
- - notepadqq
- - remmina
-
- - name: cleanup package cache
- apt:
- autoclean: yes
-
- - name: autoremove orphan packages
- apt:
- autoremove: yes
diff --git a/systems/xubuntuDaily/bash/001deploy.sh b/systems/xubuntuDaily/bash/001deploy.sh
deleted file mode 100755
index 33f1e69b..00000000
--- a/systems/xubuntuDaily/bash/001deploy.sh
+++ /dev/null
@@ -1,86 +0,0 @@
-clear
-
-start=`date +%s`
-source secrets.cfg
-
-echo ":: Adding Atom, Cryptomator, Opera to thrusted sources"
-wget -q https://packagecloud.io/AtomEditor/atom/gpgkey -O- | sudo apt-key add -
-sudo add-apt-repository "deb [arch=amd64] https://packagecloud.io/AtomEditor/atom/any/ any main"
-sudo add-apt-repository ppa:sebastian-stenzel/cryptomator
-wget -qO- https://deb.opera.com/archive.key | sudo apt-key add -
-sudo add-apt-repository "deb [arch=i386,amd64] https://deb.opera.com/opera-stable/ stable non-free"
-
-
-clear
-echo ":: Updating and Upgrading"
-sudo apt update -y &> /dev/null
-sudo apt upgrade -y &> /dev/null
-
-echo ":: Installing common dependencies"
-sudo apt install software-properties-common apt-transport-https wget -y &> /dev/null
-
-
-echo ":: Installing Atom, Keepass2, Notepadqq, Remmina"
-sudo apt install atom -y &> /dev/null
-sudo apt install keepassxc -y &> /dev/null
-sudo apt install notepadqq -y &> /dev/null
-sudo apt install remmina -y &> /dev/null
-
-echo ":: Installing keepass2 utilities"
-sudo apt install xdotool -y &> /dev/null
-
-echo ":: Installing Cryptomator, Opera Browser, gparted"
-sudo apt install cryptomator -y &> /dev/null
-sudo apt install opera-stable -y &> /dev/null
-sudo apt install gparted -y &> /dev/null
-
-echo ":: Installing docker, docker-compose and Ansible"
-sudo apt install docker -y &> /dev/null
-sudo apt install docker-compose -y &> /dev/null
-sudo apt install ansible -y &> /dev/null
-
-echo ":: Installing htops, kvm and it's utilities"
-sudo apt install htop -y &> /dev/null
-sudo apt install qemu-kvm -y &> /dev/null
-sudo apt install virt-manager -y &> /dev/null
-sudo apt install libvirt-daemon-system -y &> /dev/null
-sudo apt install libvirt-clients -y &> /dev/null
-sudo apt install bridge-utils -y &> /dev/null
-
-#echo ":: Installing gnome-control-center"
-#sudo apt install gnome-control-center gnome-online-accounts
-
-echo ":: Installing rclone, rclone-browser, tmux"
-sudo apt install rclone -y &> /dev/null
-sudo apt install rclone-browser -y &> /dev/null
-sudo apt install tmux -y &> /dev/null
-
-
-echo ":: Adding user < ${USER} > to VM groups and docker"
-sudo adduser ${USER} libvirt
-sudo adduser ${USER} kvm
-sudo gpasswd -a ${USER} docker
-
-echo ":: Installing MS Fonts"
-sudo apt install ttf-mscorefonts-installer
-
-echo ":: Removing Bloatware"
-sudo apt remove gnome-mines -y &> /dev/null
-sudo apt remove sgt-launcher -y &> /dev/null
-sudo apt remove transmission-gtk -y &> /dev/null
-sudo apt remove parole -y &> /dev/null
-sudo apt remove WebBrowser -y &> /dev/null
-sudo apt remove pidgin* -y &> /dev/null
-sudo apt remove thunderbird -y &> /dev/null
-sudo apt remove hexchat -y &> /dev/null
-sudo apt remove xfce4-notes -y &> /dev/null
-sudo apt remove imagemagick* -y &> /dev/null
-
-echo ":: Cleaning Up"
-sudo apt autoclean -y &> /dev/null
-sudo apt auto-remove -y &> /dev/null
-
-
-end=`date +%s`
-runtime=$((end-start))
-echo ":: Total Run Time: ${runtime} Seconds."
diff --git a/systems/xubuntuDaily/bash/002extras.sh b/systems/xubuntuDaily/bash/002extras.sh
deleted file mode 100644
index 5b25b40a..00000000
--- a/systems/xubuntuDaily/bash/002extras.sh
+++ /dev/null
@@ -1,28 +0,0 @@
-clear
-start=`date +%s`
-
-echo ":: Updating and Upgrading"
-sudo apt update -y &> /dev/null
-sudo apt upgrade -y &> /dev/null
-
-
-echo ":: Installing: Steam, Audacious, VLC"
-sudo apt install steam -y &> /dev/null
-sudo apt install audacious -y &> /dev/null
-sudo apt install vlc -y &> /dev/null
-
-echo ":: Installing: Handbrake, ffmpeg"
-sudo apt install handbrake -y &> /dev/null
-sudo apt install ffmpeg -y &> /dev/null
-
-echo ":: Installing: xscreensaver-gl, conky"
-sudo apt install xscreensaver-gl -y &> /dev/null
-sudo apt install conky -y &> /dev/null
-
-echo ":: Cleaning Up"
-sudo apt autoclean -y &> /dev/null
-sudo apt auto-remove -y &> /dev/null
-
-end=`date +%s`
-runtime=$((end-start))
-echo ":: Total Run Time: ${runtime} Seconds."
diff --git a/systems/xubuntuDaily/bash/010update.sh b/systems/xubuntuDaily/bash/010update.sh
deleted file mode 100755
index 3aa6d432..00000000
--- a/systems/xubuntuDaily/bash/010update.sh
+++ /dev/null
@@ -1,12 +0,0 @@
-echo ":: Updating"
-start=`date +%s`
-sudo apt update -y &> /dev/null
-echo ":: Upgrading the following:"
-sudo apt list --upgradable
-sudo apt upgrade -y &> /dev/null
-echo ":: Removing Old Packages"
-sudo apt autoclean -y
-sudo apt autoremove -y
-end=`date +%s`
-runtime=$((end-start))
-echo ":: Total Update Time: ${runtime} seconds!"
diff --git a/systems/xubuntuDaily/bash/README.md b/systems/xubuntuDaily/bash/README.md
deleted file mode 100644
index 721ddcba..00000000
--- a/systems/xubuntuDaily/bash/README.md
+++ /dev/null
@@ -1,23 +0,0 @@
-# xubuntuDaily
-Scripts used to create, maintain or update my daily xubuntu OS.
-
-
-### Situation
-
-
-### Task
-
-
-### Action
-004 - ./clipJoiner.sh
-
-### Result
-004 - Indexes all files in a directory - and sub-directories - and joins them in a single clip
-
-### Note
-
-### ToDo
-- Change from apt-key to trusted.gpg.d ()
-
-## Example Screenshot
-![Example Screenshot]()
diff --git a/systems/xubuntuDaily/bash/clearLogs.sh b/systems/xubuntuDaily/bash/clearLogs.sh
deleted file mode 100755
index 5d7e9e46..00000000
--- a/systems/xubuntuDaily/bash/clearLogs.sh
+++ /dev/null
@@ -1,4 +0,0 @@
-#!/bin/bash
-journalctl --disk-usage
-sudo journalctl --rotate
-sudo journalctl --vacuum-time=5days
diff --git a/systems/xubuntuDaily/screenshots/AtomFullScreen.png b/systems/xubuntuDaily/screenshots/AtomFullScreen.png
deleted file mode 100644
index 6285bf5d..00000000
Binary files a/systems/xubuntuDaily/screenshots/AtomFullScreen.png and /dev/null differ